• Journal of Korean Association for Spatial Structures
• /
• v.12 no.4
• /
• pp.57-69
• /
• 2012

This study investigated the behaviors of the gabled hyperbolic paraboloid shell structure subjected to differential settlement and the horizontal displacement due to the elongation of tie rod/beam on supports. Two types of shell structure with different roof slopes are used in study; conventional type which has perimeter beams around the shell panel, and simple type which removes the edge beams along the slab edge line. The effect of the removal of edge beam under vertical or horizontal displacement on supports, and the roof slope was compared using the finite element analysis.

• Nuclear Engineering and Technology
• /
• v.14 no.4
• /
• pp.178-185
• /
• 1982

Albedo-type boundary condition is incorporated into the finite element formulation of the cubic Hermite polynomials for the two-dimensional solution of the two-group diffusion problem. Two modifications are introduced with respect to the conventional expression for the weak form of the group diffusion equation with the zero flux or zero current boundary condition and the cubic element functions over the boundary nodes. The finite element formulations obtained from those modifications are tested with the two-dimensional ZION problem. The numerical effectiveness of the modifications are examined.

• Computational Structural Engineering
• /
• v.10 no.2
• /
• pp.139-148
• /
• 1997

A finite element method is programmed to analyse the nonlinear behavior of axisymmetric structures. The lst order Mindlin shell theory which takes into account the transversal shear deformation is used to formulate a conical two node element with six degrees of freedom. To evade the shear locking phenomenon which arises in Mindlin type element when the effect of shear deformation tends to zero, the reduced integration of one point Gauss Quadrature at the center of element is employed. This method is the Updated Lagrangian formulation which refers the variables to the state of the most recent iteration. The solution is searched by Newton-Raphson iteration method. The tangent matrix of this method is obtained by a finite difference method by perturbating the degrees of freedom with small values. For the moment this program is limited to the analyses of non-linear elastic problems. For structures which could have elastic stability problem, the calculation is controled by displacement.

• Steel and Composite Structures
• /
• v.20 no.3
• /
• pp.693-718
• /
• 2016

This paper presents a finite element procedure based on Bridging multi-scale method (BMM) in order to incorporate the effect of local/cross-sectional deformations (e.g., flange local buckling and web crippling) on the global behaviour of thin-walled members made of fibre-reinforced polymer composite laminates. This method allows the application of local shell elements in critical regions of an existing beam-type model. Therefore, it obviates the need for using computationally expensive shell elements in the whole domain of the structure, which is otherwise necessary to capture the effect of the localized behaviour. Consequently, highly accurate analysis results can be achieved with this method by using significantly smaller finite element model, compared to the existing methods. The proposed method can be used for composite polymer laminates with arbitrary fibre orientation directions in different layers of the material, and under various loading conditions. Comparison with full shell-type finite element analysis results are made in order to illustrate the efficiency and accuracy of the proposed technique.

• Journal of the Korean Society of Safety
• /
• v.24 no.1
• /
• pp.7-13
• /
• 2009

The objective of this study is to design a laboratory specimen for simulating residual stress of circumferential butt welding between pipes. Specimen type and method to generate residual stress were proposed based on the review of prior studies and parametric finite element analysis. To prove the proposed specimen type and loading method, the residual stress was generated using the designed specimen by applying proposed method and was measured. The measured residual stress using X-ray diffraction reasonably agreed with the results of finite element analysis considered in the specimen design. Comparison of residual strains measured at several locations on the specimen and given by finite element simulation also showed good agreement. Therefore, it is indicated that the designed specimen in this study can reasonably simulate the axial residual stress of a circumferential butt welding of pipe.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.11a
• /
• pp.199-204
• /
• 2000

A cylindrical brake device with plastic deformation is designed to stop the object moving at high velocity. Baseline model is determined based on the design specification and analytic solutions. Using finite element method, effects of various design parameters, such as thickness of the cylinder, clearance between cylinder and rod, and cone angle, to the performance of the brake device are investigated. Cone-type brake device shows better performance than cylindrical brake device with constant thickness in that plastic hinges are generated sequentially from impact end to fixed boundary, thus increasing the reliability of braking operation.

• Nonlinear Functional Analysis and Applications
• /
• v.27 no.1
• /
• pp.149-167
• /
• 2022

In this paper, we propose a viscosity iterative algorithm for approximating a common solution of finite family of variational inequality problem and fixed point problem for finite family of multi-valued type-one demicontractive mappings in real Hilbert spaces. A strong convergence result of the aforementioned problems were proved and some consequences of our result was also displayed. In addition, we discuss an application of our main result to convex minimization problem. The result presented in this article complements and extends many recent results in literature.

• Bulletin of the Korean Mathematical Society
• /
• v.61 no.1
• /
• pp.217-227
• /
• 2024

Let G be an infinite countable group and A be a finite set. If Σ ⊆ A^G is a strongly irreducible subshift of finite type and 𝓖 is the local conjugacy equivalence relation on Σ. We construct a decreasing sequence 𝓡 of unital C^*-subalgebras of C(Σ) and a sequence of faithful conditional expectations E defined on C(Σ), and obtain a Toeplitz algebra 𝓣 (𝓡, 𝓔) and a C^*-algebra C^*(𝓡, 𝓔) for the pair (𝓡, 𝓔). We show that C^*(𝓡, 𝓔) is *-isomorphic to the reduced groupoid C^*-algebra C^*_r(𝓖).

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.4
• /
• pp.242-247
• /
• 2009

AILU type preconditioners for a two-dimensional combined P2P1 finite element formulation of the interaction of rigid cylinder with incompressible fluid flow have been devised and tested by solving fluid-structure interaction (FSI) problems. The FSI code simulating the interaction of a rigid cylinder with an unsteady flow is based on P2P1 mixed finite element formulation coupled with combined formulation. Four different preconditioners were devised for the two-dimensional combined P2P1 finite element formulation extending the idea of Nam et al., which was proposed for the preconditioning of a P2P1 mixed finite element formulation of the incompressible Navier-Stokes equations. It was found that PC-III or PC-IV among them perform well with respect to computational memory and convergence rate for some bench-mark problems.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.5 no.1
• /
• pp.55-78
• /
• 2001

Given the anisotropic Poisson equation $-{\nabla}{\cdot}{\mathcal{K}}{\nabla}p=f$, one can convert it into a system of two first order PDEs: the Darcy law for the flux $u=-{\mathcal{K}{\nabla}p$ and conservation of mass ${\nabla}{\cdot}u=f$. A very natural mixed finite volume method for this system is to seek the pressure in the nonconforming P1 space and the Darcy velocity in the lowest order Raviart-Thomas space. The equations for these variables are obtained by integrating the two first order systems over the triangular volumes. In this paper we show that such a method is really a standard finite element method with local recovery of the flux in disguise. As a consequence, we compare two approaches in analyzing finite volume methods (FVM) and shed light on the proper way of analyzing non co-volume type of FVM. Numerical results for Dirichlet and Neumann problems are included.