• 대한기계학회논문집
• /
• 제18권8호
• /
• pp.2139-2157
• /
• 1994

In order to understand the delamination between leadframe and epoxy molding compound in an electronic packaging of surface mounting type, the stress intensity factor, T-stress and J-integral in fracture mechanics are obtained. The effects of geometry, material properties and molding process temperature on the delamination are investigated taking into account the temperature dependence of the material properties, which simulates as more realistic condition. As the crack length increases the J-integral increases, which suggest that the crack propagates if it starts growing from the small size. The effects of the material properties and molding process temperature on stress intensity factor, T-stress is and J-integral are less significant than the chip size for the practical cases considered here. The T-stress is negative in all eases, which is in agreement with observation that interfacial crack is not kinked until the crack approaches the edge of the leadframe.

• 한국산업정보학회논문지
• /
• 제9권2호
• /
• pp.74-80
• /
• 2004

본 논문은 2.4 GHz 대역에 있어 지향성 이득이 큰 마이크로스트립 안테나를 유한요소법을 이용하여 설계하고 그 특성을 해석한다. 안테나의 소형화를 위하여 유전율이 높은($\varepsilon$$_{r}$=4.6) 기판을 사용하며, 패치의 구조는 방형으로 한다. 또한 안테나의 특성 해석은 상용 툴인 HFSS를 사용한다. 설계한 마이크로스트립 안테나의 특성을 살펴보면 공진주파수 2.45 GHz 에서 입력 임피던스는 약 50 Ω으로 별도의 정합회로가 필요치 않으며, 1개의 페치인 경우 안테나의 이득은 딱 6.2 dBi이고, 패치의 배열에 따라 이득의 증대가 나타났다. 제시된 패치의 배열에 따른 이득의 변화는 2.4 GHz 대역 통신시스템의 용도에 따른 안테나의 적절한 선택기준이 될 수 있다..

• 대한수학회보
• /
• 제48권3호
• /
• pp.523-537
• /
• 2011

A receiver operating characteristic (ROC) curve plots the true positive rate of a classier against its false positive rate, both of which are accuracy measures of the classier. The ROC curve has several interesting geometrical properties, including concavity which is a necessary condition for a classier to be optimal. In this paper, we study the nonparametric maximum likelihood estimator (NPMLE) of a concave ROC curve and its modification to reduce bias. We characterize the NPMLE as a solution to a geometric programming, a special type of a mathematical optimization problem. We find that the NPMLE is close to the convex hull of the empirical ROC curve and, thus, has smaller variance but positive bias at a given false positive rate. To reduce the bias, we propose a modification of the NPMLE which minimizes the $L_1$ distance from the empirical ROC curve. We numerically compare the finite sample performance of three estimators, the empirical ROC curve, the NMPLE, and the modified NPMLE. Finally, we apply the estimators to estimating the optimal ROC curve of the variance-threshold classier to segment a low depth of field image and to finding a diagnostic tool with multiple tests for detection of hemophilia A carrier.

• 한국정밀공학회지
• /
• 제22권1호
• /
• pp.89-96
• /
• 2005

This paper is concerned with a balancing motion formulation and control of the ZMP (Zero Moment Point) for a biped-walking robot that has a prismatic balancing weight or a revolute balancing weight. The dynamic stability equation of a walking robot which have a prismatic balancing weight is conditionally linear but a walking robot's stability equation with a revolute balancing weight is nonlinear. For a stable gait, stabilization equations of a biped-walking robot are modeled as non-homogeneous second order differential equations for each balancing weight type, and a trajectory of balancing weight can be directly calculated with the FDM (Finite Difference Method) solution of the linearized differential equation. In this paper, the 3dimensional graphic simulator is developed to get and calculate the desired ZMP and the actual ZMP. The operating program is developed for a real biped-walking robot IWRⅢ. Walking of 4 steps will be simulated and experimented with a real biped-walking robot. This balancing system will be applied to a biped humanoid robot, which consist legs and upper body, as a future work.

• 한국강구조학회 논문집
• /
• 제16권1호통권68호
• /
• pp.61-72
• /
• 2004

우리나라에서는 생산되는 I형강을 대상으로 비탄성 휨-뒤틀림 좌굴에 대하여 연구하였으며 잔류응력은 다항식형과 단순형으로 고려하였다. 또한 웨브의 면의 뒤틀림이 구속된 보의 비탄성 휨-비틀림 좌굴에 대해서도 알아보았다. 해석결과를 강구조편람의 허용 휨응력과 비교하였다. 균일한 휨을 받는 보의 경우는 비탄성 휨-비틀림 좌굴이 중요한 큰 영향을 미치지 않았으나, 중간 브레이싱이 없는 단지간 및 중지간보의 경우 강구조편람에 의한 설계는 과설계가 됨을 알 수 있었다.

• 한국자동차공학회논문집
• /
• 제6권1호
• /
• pp.196-204
• /
• 1998

For the experimental measurement of instantaneous surface temperature of the piston of the DI mono cylinder diesel engine, the instantaneous temperature proves, data acquisition system, and grass-hopper type linkage system were developed. The instantaneous temperatures on the piston bowl, crown, lands and skirt were measured and analyzed, and the following conclusions were derived ; (i) The crank angle for the maximum instantaneous temperature during one cycle varies and moves back and forth by the measuring positions and engine speeds. (ii) The engine speeds, the positions of the measuring points and the cooling water temperature had an effect on the instantaneous temperature amplitude. (iii) The instantaneous temperature suing phenomena appeared on the temperature profiles of the piston crown, top and second land of ring, but on the temperature profiles of the parts of the third land of the fing and skirt, they didn't appear, (iv) The isothermal lines in the piston were acquired through the operation of the finite elements method using the measured temperatures as the boundary conditions.

• Design & Manufacturing
• /
• 제7권1호
• /
• pp.28-33
• /
• 2013

During the cold forming, due to high working pressure acting on the die surface, failure mechanics must be considered before die design. One of the main reasons of die failure in industrial application of metal forming technologies is wear. The mechanisms of wear are consisted of adhesion, abrasion, erosion and so on. Die wear affects the tolerances of formed parts, metal flow, and costs of process. The only way to control these failures is to develop a prediction method on die wear suitable in the design state in order to optimize the process. The wear system is used to analyse 'operating variables' and 'system structure'. In this study, with AISI D2, AISI 1020, AISI 304SS materials, a series of the wear experiments of pin-on-disk type to obtain the wear coefficients from Archard's wear model and the upsetting processes are carried out to observe the wear phenomenon during the cold forming process. The analysis of upsetting processes are performed by the rigid-plastic finite element method. The result of the analysis is used to investigate the die wear the processes, and the analysis simulated die wear profiles are compared with the experimental measured die wear profiles.

• 전기학회논문지
• /
• 제56권1호
• /
• pp.57-65
• /
• 2007

Along with the development of power electronics and magnetic materials, permanent magnet (PM) brushless direct current (BLDC) motors are now widely used in many fields of modern industry BLDC motors have many advantages such as high efficiency, large peak torque, easy control of speed, and reliable working characteristics. However, Compared with the other electric motors without a PM, BLDC motors with a PM have inherent cogging torque. It is often a principle source of vibration, noise and difficulty of control in BLDC motors. Cogging torque which is produced by the interaction of the rotor magnetic flux and angular variation in the stator magnetic reluctance can be reduced by sinusoidal air-gap flux density waveform due to reduction of variation of magnetic reluctance. Therefore, this paper will present a design method of magnetizing system for reduction of cogging torque and low manufacturing cost of BLDC motor with isotropic bonded neodynium-iron-boron (Nd-Fe-B) magnets in ring type by sinusoidal air-gap flux density distribution. An analytical technique of magnetization makes use of two-dimensional finite element method (2-D FEM) and Preisach model that expresses the hysteresis phenomenon of magnetic materials in order for accurate calculation. In addition, For optimum design of magnetizing fixture, Factorial design which is one of the design of experiments (DOE) is used.

• Structural Engineering and Mechanics
• /
• 제62권6호
• /
• pp.739-748
• /
• 2017

Notches such as slots are typical geometric features on mechanical components that promote fatigue crack initiation. Unlike for components with open hole type notches, there are no conventional treatments to enhance fatigue behavior of components with slots. In this work we evaluate the viability of applying laser shock peening (LSP) to extend the fatigue life of 6061-T6 aluminum components with slots. The feasibility of using LSP is evaluated not only on damage free notched specimens, but also on samples with previous fatigue damage. For the LSP treatment a convergent lens was used to deliver 0.85 J and 6 ns laser pulses 1.5 mm in diameter by a Q-switch Nd: YAG laser, operating at 10 Hz with 1064 nm of wavelength. Residual stress distribution was assessed by the hole drilling method. A fatigue analysis of the notched specimens was conducted using the commercial code FE-Safe and different multiaxial fatigue criteria to predict fatigue lives of samples with and without LSP. The residual stress field produced by the LSP process was estimated by a finite element simulation of the process. A good comparison of the predicted and experimental fatigue lives was observed. The beneficial effect of LSP in extending fatigue life of notched components with and without previous damage is demonstrated.

• 한국방재학회 논문집
• /
• 제1권2호
• /
• pp.63-74
• /
• 2001

본 논문에서는 모의실험을 이용하여 진동감시를 통한 거대 구조물에서의 비파괴 손상탐지의 타당성을 입증하였다. 트러스 형식의 구조물에 대한 비파괴 손상탐지 이론을 정립하였다. 이 이론의 타당성 조사를 위하여 16개의 격간과 246개의 요소로 구성되어 있는 3차원 트러스 구조물을 유한요소로 모델링 하였으며, 이 모델을 이용하여 모의 손상을 가하였다. 손상의 경우는 총 4가지로 대상 구조물의 한 곳에서 손상이 발생한 경우부터 세 곳에서 손상이 발생한 경우까지를 고려하였다. 주어진 모달 매개변수를 이용하여 미세 손상 뿐 아니라 큰 손상에 대해서도 결과가 잘 일치함을 알 수 있었다.