• Korean Journal of Applied Biomechanics
• /
• v.19 no.1
• /
• pp.167-177
• /
• 2009

The purpose of this study was to investigate effect of golf shoe design on kinematic variables during golf swing. Five professional male golfers with shoe size 270mm were recruited for the study. Swing motion was collected using 8 high speed camera motion analysis at a sampling of 180Hz. Kinematic variables were calculated by EVaRT 4.2 software. Driver swing was divided into four events; El(adress), E2(top), E3(impact) and E4(finish). Time, peak velocity, velocity of center of mass, velocity of the foot and ankle angle during Phase 1(El-E2), Phase 2(E2-E3), and Phase 3(E3-E4) were analyzed in order to investigate the relationship between golf shoe design and swing performance. The findings indicated that type C golf shoes would be beneficial for stability and control of movement during address and swing performance. Furthermore, faster speed of golf shoes, center of mass, and both feet were observed with Type C golf shoes. It is expected that golfers with Type C golf Shoes provide greater force as they control the center of mass faster and increase rotational force during impact compared to other golf shoes.

• Journal of Oral Medicine and Pain
• /
• v.33 no.2
• /
• pp.121-132
• /
• 2008

To establish the diagnosis and treatment plan for skeletal Class II malocclusion, patient's skeletal morphology, prognosis as well as the treatment effect is one of the important factor to consider. Therefore, the present study classified analyzed the difference between initial(T1) and after use of activator(T2), and after finish of direct multi-bonding system treatment(T3) for Class II malocclusion during growth period according to the treatment result(effective body length) and morphology of vertical skeletal type. The experimental group was classified into two groups(1 group, 2 group) according to the effective body length change between before and after use of activator, showed good treatment effect of activator for patient with small mandible and large differential between maxilla and mandible, and short anterior facial height. And the difference between 1 and 2 group in the experimental group before treatment(T1) disappeared in the finished treatment(T3). But in contrast, the initial difference of T1 stage between a and b group in the control group did not disappear in the finished treatment(T3). In short, experimental group's treatment effect was much better than contrast group and the treatment effect was maintained and got stable results at comparison experimental group with contrast group. Through this study, we can find activator's treatment effect and stable retention of that in growing Class II malocclusion patients. By estimate of activator treatment effect through these results, we can establish the correct diagnosis and treatment plan for adolescent Class II malocclusion estimate of activator treatment effect and lead the ideal facial growth pattern.

• The Korean Society of Law and Medicine
• /
• v.9 no.1
• /
• pp.319-382
• /
• 2008

As a withdrawing care's study, the purpose of this study is searching about withdrawing care's acceptance and circumstances through Bora-mae hospital case(chapter 1). Withdrawing life-sustaining treatment has various forms. Though the meaning of euthanasia, death with dignity, natural death, physician assisted suicide are duplicated, the meaning of those are different slightly. Firstly, this study looks about the difference of the those meaning and acceptance range(condition) by withdrawing care's forms(chapter 2). Bora-mae hospital case sentenced guilty about physician who discharged incompetent patient who was after surgery by patient's wife determination. This Bora-mae case that sentenced guilty about discharge against medical advise(DAMA) that is regarded to custom has brought intensive confliction of legal, social, medical aspect, Bora-mae hospital case has many legal problems. First, as to criminal law rule 250(murder), the problem is whether discharge and withdrawing life-sustaining treatment is commission or omission. this study concluded omission(district court: omission, appeal, supreme court: commission). Because legal denounce point of discharge and medical treatment withdrawing is omission that physician who is obligatory on patient to cure. If physician's act is regarded omission, it is necessary to determine whether he has guardian status and obligation. Without guardian status and obligation, omission crime can't exist. This study decided that physician had guardian status and obligation and foundation of guardian status was pre-action or acceptance of emergency patient. Physician's medical treatment duty finished when patient(or patient's guardian) demands discharge. But when patient death is foreseen and other possible treatment does not exist, his duty of life prolonging treatment does not finish. This originate from physician's social responsibility and public status that limits patient's private liberty. This study regarded physician's action as accomplice about whether physician's discharging action is accomplice or the principal offender(district court: the principal offender, appeal, supreme court: accomplice). Though the principal offender needs criminal determination and action, there is no this common determination and functional action control of physician in Bora-mae case(chapter 3). Bora-mae hospital case partly originated from deficiency of legal, institutive system including medical security system shortage, the instruction is 1. medical security system strengthening, 2. hospital ethical committee's activity strengthening, 3. institutionalization of withdrawing life-sustaining treatment, 4. acceptance of pre-decision making system, 5. sufficient persuasion of physician for patient and faithful writing of medical paper, 6. respect for patients' self-determination and rights, 7. consciousness's changing for withdrawing life-sustaining treatment and persistent education about medical ethics(chapter 4). Considering Bora-mae case, medical sector is not the dead ground of a criminal punishment. Intervention of criminal law in medical sector give rise to ill effect, that is, excess medical examination and treatment, safeguard treatment, delay of discharge from a hospital. Because sufficient guarantee of life becomes mere empty slogan under situation that impose a burden of heavy cost to family or hospital, public and systematic solution should be given(chapter 5).

• Journal of Korean Medical classics
• /
• v.24 no.2
• /
• pp.23-50
• /
• 2011

"LeiGongPaoZhiLun" is the first pharmaceutical book, and there are various opinion on when LeiXiao(雷斅), the author lived. From the aspect of several data, it is appropriate most that LeiXiao live in the period of Sui(隋) Dynasty, like SuSong(蘇頌) in the Sung Dynasty said, This book was not made at one time by one person. At the beginning, it was written by LeiXiao and the later generations enlarged to finish. The original of "LeiGongPaoZhiLun" disappeared already but a large amount of this book was quoted to "ZhengLeiBenCao(證類本草)" to be preserved. The contents of "LeiGongPaoZhiLun" are the first professional book about processing of medicinal, in which most of processing of medicinal that is generally used today, is included and some methods are unused. Besides, the regulations of this book are specific, the range is broad, and theoretical frame is established for the first time. This book has abundant contents, in which several processing of medicinal are written. There are 10 methods such as steaming(蒸法), boiling(煮法), baking(炮法), stir-frying(炒法), calcining(煅法), long time boiling(煉法), scorching(燒法), baking after wrapping(煨法), immersing(浸法), washing(洗法), flying(飛法), etc. How to remove some section that is not used for drug, how to separate according to medical use and region to be applied, how to smash, how to cut, how to dry, container for medicine, warning for making a prescription, time to make medicine and amount of medicine, how to distinguish superior and inferior and origin, how to make medicine partially, etc, are contained in this book. The contents of "LeiGongPaoZhiLun" can be mixture of processing of medicinal of medical scientists and taoists. In conclusion, however, the effect by the later medical generations of "LeiGongPaoZhiLun" was not great on processing of medicinal. It stemmed from the difference of processing of medicinal in this very taoistic book that realistic difficulties were disregarded by taoists for training and practical purpose, treatment that is the reason that later medical generations used processing of medicinal. Consequently, there is no great relation between the development of processing of medicinal in the Sung Dynasty and this book. "LeiGongYaoXingFu(雷公藥性賦)" that was abundant in medical market in Ming(明) and Qing(清) period has no relation with "LeiGongPaoZhiLun" is kind of a distribution-purposed book that was mnge in or after Ming Dynasty. However, since a book that is said to be written by 'LiGao(李杲)'PaoZhihis nof a dijust borrowed and focus on a brief summery, it is not desirable for beginners to learn medical knowledge. "LeiGongPaoZhiLun" is the first pharmaceutical book and is a model to show how a science in the history of the herb medicine generated and developed and how such a book is changed and modified to make a change of value.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.4
• /
• pp.97-103
• /
• 2014

Among various lead-free solders, the Sn-58Bi solders have been considered as a highly promising lead-free solders because of its low melting temperature and high tensile strength. However, Sn-58Bi solder has the poor ductility. To enhance the mechanical property of Sn-58Bi solder, epoxy-enhanced Sn-58Bi solders have been studied. This study compared the microstructures and the mechanical properties of Sn-58Bi solder and Sn-58Bi epoxy solder with aging treatment. The solders ball were formed on the printed circuit board (PCB) with organic solderability preservative (OSP) surface finish, and then the joints were aged at 85, 95, 105 and $115^{\circ}C$ for up to 100, 300, 500 and 1000 hours. The shear test was conducted to evaluate the mechanical property of the solder joints. $Cu_6Sn_5$ intermetallic compound (IMC) layer grew with increasing aging time and temperature. The IMC layer for the Sn-58Bi epoxy solder was thicker than that for the Sn-58Bi solder. According to result of shear test, the shear strength of Sn-58Bi epoxy solder was higher than that of Sn-58Bi solder and the shear strength decreased with increasing aging time.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.4
• /
• pp.17-30
• /
• 2000

The objective of this study is to evaluate the lateral earth pressure and the stability of small scale retaining wall with waste foundry sand(WFS) mixtures as a controlled low strength materials (CLSM). Three different types of WFS, like Green WFS, Hurane WFS and Coated WFS, were used in this study, and fly ash of Class F type was adopted. To evaluate the lateral earth pressure and the stability of retaining wall, two different samll scale retaining wall tests, which are called an artificially controlled strain method and a natural strain method, were carried out. In case of an artificially controlled strain method, the coefficient of lateral earth pressure, just after backfilling of WF mixtures, was around 0.8 to 1.0, and most of earth pressure was dissipated within 12 hours. In case of a natural strain method, two steps of stage constructions were employed. The mixtures of Hurane WFS and Coated WFS showed fast decrease of earth pressure due to a relatively good drainage. Judging from the sta bility of retaining wall for overturning and sliding, two steps of stage construction for 2 days were enough to finish the backfill of 6-m height of retaining wall. Also, considering the curling effect of WFS mixtures, the stability of retaining wall increased as curling time increased.

• Korean Journal Plant Pathology
• /
• v.11 no.1
• /
• pp.17-29
• /
• 1995

This study was conducted from 1991 to 1993 to develop a fungicidal spray program for the apples exportable to the United States of America, in which quarantine and pesticide residue in agricultural products are strictly regulated. In 1991, 2 spray schedules were applied to an orchard, in one of which the 7 fungicides registered for apple both in Korea and U.S. were used, and in the other of which the Bordeaux mixture for which the tolerance was exempted in U.S. was used 2 times along with those 7 fungicides. The apple white rot and fruit infection by Alternaria mali were not effectively controlled by the 7 fungicides alone; however, the control efficacy was raised by adding the Bordeaux mixture to the spray schedule. In 1992, 4 spray schedules were applied in which the kinds of fungicides and spray intervals were different one another. The results suggested that an effective spray program can be developed by adopting the Bordeaux mixture for 3 times or adopting the imminoctadine-triacetate which has not tolerance level in U.S. for same times in the vulnerable stage of apple white rot and alternaria blotch. In spite of the high efficacies against major apple diseases, the Bordeaux mixture could not be recommended to the apple growers due to the various defects such as restrictions in compatibility with insecticides and acaricides, troublesomeness in preparation and spray, especially the harmful effect on the finish of Fuji apples. In 1993, a spray program adopting 3 times of imminoctadine-triacetate during the growing season of apple was developed, which not only can effectively control the major apple diseases but also avoid the pesticide residue problems if it was sprayed 2 or 3 times after bagging. On the basis of the 3 years results, a basic fungicide spray program was formulated in which 1~3 times of imminoctadine-triacetate and 1~2 times of bitertanol were adopted in addition of the 7 common fungicides registered in both countries. In the results of application of the spray schedule to the actual farming in the 4 areas of Kyungpook Province in 1994, no noticeable defects were detected at the first year trial. However, this spray program will be continuously evaluated and modified to obtain better control efficacies against major apple diseases.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.4
• /
• pp.464-473
• /
• 2008

Winter migratory birds gather in paddy rice fields to feed shed rice grains. The Korean Ministry of Environment has practiced a policy program Contract on Paddy Field Management (CPFM) during winter fallow since 2002. This program starts with a contract between local governments and farmers, and the government pays a differential subsidy to farmers who finish spreading rice straw, cultivating barley, letting the whole rice plant without harvest, and submerging paddy fields for winter migratory birds. As more local governments have operated CPFM program, the total area on the contract and subsidy budget has increased yearly since 2002. This program could have its stable position as a successful policy by giving profits to farmers. With the program extended, the population of winter migratory birds has been greatly. For the evaluation of environmental performance of a policy, we analyzed this CPFM program by introducing some indicators in the form of Driving Force-State-Response Framework. The indicators were composed of 3 categorized indicators; the area of paddy land contracted under this program as 'driving force' indicator, population of birds, the number of bird species and the amount of feces as 'state' indicators, and the size of monetary support, the number of farmers or local governments participating, and public perception as 'response' indicators. The contract area of paddy field under CPFM could be a good biodiversity indicator reflecting potential performance of this policy measure in the light of its linkage to the population of winter migratory birds. And the share of CPFM land of the whole agricultural land might also be used as a useful indicator of policy evaluation for improvement of wildlife diversity. The 'state' indicators such as population of birds and the number of bird species could be matched to 'driving force' indicator, but the total CPFM area of each site could not reflect the effect of areas under different management practices. However, the amount of bird feces could reflect differences in environmental performance with management practices as 'state' indicators. The development of indicators indicating 'response' such as farmers' behavior, public perception, and policy makers' willingness is also needed to support a successful implementation and improvement of this policy measure with the development of 'performance' indicators integrating all these indicators.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5D
• /
• pp.499-505
• /
• 2012

As the excavation depths during excavation works in urban sites are getting deeper and bigger, It is necessary to study for the improvements to solve the problems in the excavation processes. This research deals with the excavation method that can not only minimize the effect on the surrounding constructions, but also shorten the construction period of the excavation work. For this research, there have been an extensive literature review of the bibliographic data about Slurry Wall Method, which is recognized around the world, and the analysis of the major problems in the existing ineffective construction step. These efforts led to the technical improvements. Accordingly, a new construction method applied with the new technical factors has been suggested, and it was possible to compare Slurry Wall Method with the construction method and analyze them on the base of the examples using the suggested method. This new method decreased the excavation period by 15 days. It took only 33days to finish the excavation work, as compared to 48 days that can be seen on the pre-modification schedule. Furthermore, the suggested method in this research is safer, more economically feasible, and better for the environment than Slurry Wall Method. It will contribute to shortening the construction period of Slurry Wall Method in the end.

• Korean Institute of Interior Design Journal
• /
• v.26 no.1
• /
• pp.33-42
• /
• 2017

Interior design especially the design developments for commercial spaces should ensure the economy of spaces. This is the marketing for space. It is necessary to understand the design elements of commercial space for the efficient using of digital media of space marketing. In this research decided to design application schemes for shopping mall by searching fashion shopping behaviors of users with persona-base scenario approach. Collected the information of users behavior base on case analysis of advance research to make personas. And develop scenario base personas for knowing the needs of users. And then made 4 schemes as the solution. Scheme 1. Customers can get the information and communication with the staff through with media screen in one room of shopping mall. The data of customers can be recorded for providing information or product recommendation personality. Forecast to preferred by group trip or customers that don't like walking around in shopping mall. Scheme 2. Install a media screen at entrance of a store in shopping mall and show special effect to raise customers' attention who walk through from the front of the store. Through with this customers will stay for long time and raise curiosity to get in the store. And the media screen also provide information of store and products. Scheme 3. Customers can get the information of products with using smart phone to scan QR cord in labels of products and record. Customers can finish whole shopping behaviors without the help of store staff. And can make buying decision even have left shopping mall as a online mode. Scheme 4. Store managers can record the products and the environment of store with 360 camera and update to website. Then customers can browse the virtual space with VR glasses. That make customers can have the real shopping experience without being in the store. In this study, have presented schemes of digital media in commercial space. But there are various of commercial space. In this study was presented schemes for shopping mall by searching fashion shopping behaviors of users. And look forward the researches about specific space setting and other type of commercial space for space development.