• The KIPS Transactions:PartB
• /
• v.11B no.7 s.96
• /
• pp.759-768
• /
• 2004

Recently the biometric recognition technology is intensively studied and the standardization of the technology has been highly demanded for its commercialization. Currently many blometric recognition products are being developed based on the BioAPl(Biometric Application Program-ming Interface) specification. However, the reliable testing tools (or scenarios) to evaluate performance and conformance of the products are not shown yet. In this paper, a conformance testing method is presented, which verifies a biometric recognition system to meet the requirements of the BioAPl standard. Two different testing procedures are used in the proposed method. The first procedure evaluates that each functions offered in the BioAPl specification are correctly implemented and that the functions are actually used in the system. Through the Procedure, a BSP(Biometric Service Provider) system is executed on the framework of the BioAPl functions. It requires selection of parameters and prece-dent functions that should be executed first. The second procedure evaluates the abilities of module management, handling operations and ver-ification process by the analysis of the test cases. It tests the correctness of the system operation when a testing scenario is given. The proposed testing method is applied on a fingerprint verification BSP using the sample BSP provided by the BioAPl consortium. The experimental results shows the benefits of the proposed testing method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2339-2345
• /
• 2011

Gait recognition is the method to identify the person who walks in front of camera using characteristics of individuals by a sequence of images of walking people. The accuracy of biometric such as fingerprint or iris is very high; however, to provide information needs downsides which allow users to direct contact or close-up, etc. There have been many studies in gait recognition because it could capture images and analysis characteristics far from a person. In order to recognize the gait of person needs a continuous sequence of walking which can be distinguished from the individuals should be extracted features rather than an single image. Therefore, this paper proposes a method of gait recognition that the motion of objects in sequence is described the characteristics of a shape sequence descriptor, and through a variety of experiments can show possibility as a recognition technique.

• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.4
• /
• pp.174-179
• /
• 2018

Currently, various security technologies such as fingerprint recognition and face recognition are being developed. However, although many technologies have been developed, the field of incorporating technologies is quite limited. In particular, it is easy to adapt modern security technologies into existing digital systems, but it is difficult to introduce new digital technologies in systems using analog systems. However, if the system can be widely used, it is worth replacing the analog system with the digital system. Therefore, the selected topic is the electronic attendance system. In this paper, a camera is installed to a door to perform a Haar-like feature training for face detecting and real-time face recognition with a Eigenface in principal component analysis(PCA) based face recognition using raspberry pi. The collected data was transmitted to the smartphone using wireless communication, and the application for the viewer who can receive and manage the information on the smartphone was completed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.11
• /
• pp.1528-1533
• /
• 2020

Recently, indoor location recognition technology using Wi-Fi fingerprints has been applied and operated in various industrial fields and public services. Along with the interest in machine learning technology, location recognition technology based on machine learning using wireless signal data around a terminal is rapidly developing. At this time, in the process of collecting radio signal data required for machine learning, the accuracy of location recognition is lowered due to distorted or unsuitable data for learning. In addition, when location recognition is performed based on data collected at a specific location, a problem occurs in location recognition at surrounding locations that are not included in the learning. In this paper, we propose a learning data preprocessing technique to obtain an improved position recognition result through the preprocessing of the collected learning data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.5
• /
• pp.734-739
• /
• 2018

Fingerprint recognition and iris recognition, which are one of the biometric methods, are easily influenced by external factors such as sunlight. Recently, finger vein recognition is used as a method utilizing internal features. However, for accurate finger vein recognition, it is important to clearly separate vein and background regions. However, it is difficult to separate the vein region and background region due to the abnormalized illumination, and a method of separating the vein region and the background region after normalized the illumination of the input image has been proposed. In this paper, we proposed a method to enhance the quality improvement and improve the processing time compared to the existing finger vein recognition system binarization and labeling method of the image including the image stretching process based on the existing illumination normalization method.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.4
• /
• pp.506-511
• /
• 2004

Biometrics is getting more and more attention in recent years for security and other concerns. So far, only fingerprint recognition has seen limited success for on-line security check, since other biometrics verification and identification systems require more complicated and expensive acquisition interfaces and recognition processes. Hand-Geometry has been used for biometric verification and identification because of its acquisition convenience and good performance for verification and identification performance. Hence, it can be a good candidate for online checks. Therefore, this paper proposes a Hand-Geometry recognition system based on geometrical features of hand. From anatomical point of view, human hand can be characterized by its length, width, thickness, geometrical composition, shapes of the palm, and shape and geometry of the fingers. This paper proposes thirty relevant features for a Hand-Geometry recognition system. However, during experimentation, it was discovered that length measured from the tip of the finger was not a reliable feature. Hence, we propose a new technique based on Genetic Algorithm for extraction of the center of nail bottom, in order to use it for the length feature.

• The Journal of the Korea Contents Association
• /
• v.7 no.3
• /
• pp.1-8
• /
• 2007

The images, which were acquired from various systems such as CCTV and Robot, include many human faces. Because of a rapid increase in visual data, we cannot process these manually; rather we need to do these automatically. Furthermore, companies require automatic security systems to protect their new technology. There are various options available to us, including face recognition, iris recognition and fingerprint recognition. Face recognition is preferable since it does not require direct contact. However, the standard 2-Dimensional method is limited, so Morphable Models may be recommended as an alternative. The original morphable model, made by MPI, contains a large quantity of data such as texture and geometry data. This paper presents a Geometrix-based morphable model designed to reduce this data capacity.

• Journal of Intelligence and Information Systems
• /
• v.9 no.3
• /
• pp.193-205
• /
• 2003

In this paper, we suggest user authentication and authorization system for internet banking by face recognition. The system is one of Biometrics technology to verify and authorize personnel identification and is more unobtrusive than the other technologies, because they use physiological characteristics such as fingerprint, hand geometry, iris to their system that people have to touch it. Also, the face recognition system requires only a few devices such as a camera and keypad, so it is easy to apply it to the real world. The face recognition algorithms open to the public are separated by their analysis method differ from what characteristic of the human face use. There are PCA (principal Component Analysis), ICA (Independent Component Analysis), FDA (Fisher Discriminant Analysis). Among these, physiological data of encrypted form is translated utilizing PCA which is the most fundamental algorithm that analyze face feature, and we suggests design method of user authentication system that can do send-receive fast and exactly.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.6 no.3
• /
• pp.247-254
• /
• 2006

Biometrics are getting more and more attention in recent years for security and other concerns. So far, only fingerprint recognition has seen limited success for on-line security check, since other biometrics verification and identification systems require more complicated and expensive acquisition interfaces and recognition processes. Hand-Geometry can be used for biometric verification and identification because of its acquisition convenience and good performance for verification and identification performance. It could also be a good candidate for online checks. Therefore, this paper proposes a Hand-Geometry recognition system based on geometrical features of hand. From anatomical point of view, human hand can be characterized by its length, width, thickness, geometrical composition, shapes of the palm, and shape and geometry of the fingers. This paper proposes thirty relevant features for a Hand-Geometry recognition system. This system presents verification results based on hand measurements of 20 individuals. The verification process has been tested on a size of $320{\times}240$ image, and result of the verification process have hit rate of 95% and FAR of 0.020.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 2002.11a
• /
• pp.440-445
• /
• 2002

최근 생체인식제품 시장이 활성화됨에 따라 생체인식제품에 대한 객관적인 성능평가가 절실히 요구되고 있는 상황이다. 이미 국외에서는 이러한 추세에 따라 지문, 얼굴, 홍채, 음성 등 각 생체인식제품에 대한 성능평가 기술을 개발하고 있으며, 자국의 생체인식제품에 대한 성능을 개선하는데 도움을 주고 있다. 현재 국내의 경우는 생체인식제품에 대한 객관적인 성능평가 연구기반이 취약한 상태이며, 개발자 자신에 의한 주관적인 평가방법에 따라 자체 시험을 하는데 머물고 있는 실정이다. 이에 따라 본 고에서는 우선적으로 지문인식제품에 대한 국내 적용 가능한 성능평가 항목과 평가방법을 제시하기 위하여 광학식, 반도체식, 열감지식 입력센서별 온도, 습도, 압력, 기만성 측정방법과 인식알고리즘에 대한 성능측정방법을 분석하였다.