• Clinics in Shoulder and Elbow
• /
• v.13 no.1
• /
• pp.72-78
• /
• 2010

Purpose: Too develop a flexible drill device that can be inserted into the shoulder joint so that arthroscopic transosseous suture repair for Bankart lesion is possible. Materials and Methods: We created a device composed of a flexible drill unit and a guide pipe unit. The flexible drill unit was made of flexible multifilament wires (1.2 mm in diameter) that was twisted into one cord so that it can flex in any direction and a drill bit (1.2 mm in diameter) that is attached onto one end of the flexible wire. The guide pipe unit was a 150 mm long metal pipe (2.0 mm in inner diameter and 3.0 mm in outer diameter), with one end bent to 30 degrees. The flexible drill set was inserted into the shoulder joint through the posterior portal of the joint. The guide pipe component was placed onto the medial wall of the glenoid so that the pipe was placed 5 mm posterior to the margin of the anterior glenoid rim. The flexible drill was driven through the glenoid by the power drill so that holes were made in the glenoid. A non- absorbable suture was passed through the hole. Tying of a sliding knot tying was accomplished over the capsule and labrum after making a stitch through the capsule and labrum with a suture hook loaded with suture passer. The same procedures were done at the 2 and 4 O'Clock positions of the glenoid. Results: Five cases with Bankart lesion received arthroscopic transosseous repair with our flexible drill device. There were no intraoperative problems. Neither redislocation nor subluxation was reported at final follow-up. Conclusion: Arthroscopic transosseous suture repair without suture anchors and easy tying of a sliding knot are possible with a flexible drill set.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.6
• /
• pp.2607-2616
• /
• 2012

This study was designed to figure out patient safety culture of medical institutions and try to utilize the study results as basic data for analyzing doctor's awareness of patient safety culture. To this end, questionnaire survey was conducted from August 1st to September 5th, 2011, targeting doctors working at senior general hospitals located in G city, and 194 questionnaires were utilized for final analysis. The research results are as follows. First, there was a difference in awareness of deployment of staffs depending on gender, age, term of service in the hospital, contact with patients and working hours per week in relationship between subjects, wards and hospital safety culture, and organizational learning and teamwork in the ward turned out to be significant in accordance with working hours per week, and all sub-areas of the ward safety culture by departments. Second, feedback about the malpractice, communication, report on malpractice frequency and overall safety awareness were found to be significant by departments in relationship of subjects, medical incident reporting system, patient safety evaluation and overall level of consciousness, and the overall safety awareness showed significant results according to contact with patients and working hours per week. Third, there was a positive corelation in sub-areas of the ward and hospital safety culture awareness, overall recognition and patient safety evaluation, and a positive corelation with medical incident reporting system was found in all areas except for attitude of managers/immediate supervisors and that of hospital executives. Fourth, sub-areas of patient safety culture which has a effect on patient safety showed significant results in organizational learning, openness of communication, overall safety awareness, systematic cooperation between departments, feedback/communication and non-punitive response. In conclusion, to increase the level of the ward and hospital patient safety culture of doctors and implement medical incident reporting system faithfully, it is necessary to activate teamwork through organizational learning in the ward based on the adequate staffing and working hours, promote open communication between departments and provide feedback on medical malpractice, thereby establishing a cooperative system by departments and active support of hospital executives for patient safet.

• Journal of Gastric Cancer
• /
• v.4 no.4
• /
• pp.257-262
• /
• 2004

Purpose: We reported our preliminary result in 2001. At that time, the follow-up period was too short to evaluate the survival benefit of adjuvant chemotherapy in gastric cancer without serosal invasion. Therefore, we followed those patients for 66 months to determine the long-term effects of adjuvant chemotherapy. Materials and Methods: We analyzed the recurrence pattern, the survival rate, and the disease-specific survival of 135 patients by reviewing their medical records and calling the patients or their relatives. All enrolled patients were included in the intention-to-treat analysis of efficacy. Results: The follow-up rate was $89.6\%$ (121/135), and the median follow-up duration was 66 months. Among the 135 patients, 4 relapsed in group 1 (5-FU+cisplatin), 7 in group 2 (mitomycin C+oral 5-FU), and 6 in group 3 (oral 5-FU only). The overall survival rate was $89\%$ in group 1, $84\%$ in group 2, and $82\%$ in group 3. There were no differences in the overall survival rates and the disease-specific survival rates among the three groups. Conclusion: Oral chemotherapeutic agents have an acceptable effect for adjuvant chemotherapy compared with intravenous agent. However, a large-scale, prospective, randomized study, including a control group, is needed for an exact evaluation.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.3
• /
• pp.359-371
• /
• 2010

Facial asymmetry has been found with a higher frequency (70~84%) in skeletal class III malocclusion patients. Anticipating the poor prognosis of prosthesis due to malocclusion, occlusal stability must be obtained by orthodontic treatment. Moreover, orthodontic surgery would be needed in some severe cases for better functional and esthetic results. The orthognathic surgery is performed on one jaw or two jaw depending on the results of facial diagnosis. Genioplasty may change the vertical, horizontal, sagittal position of chin by osteotomy or augmentation using implants, also. This case is about a 24 year-old male patient who visited our clinic to solve the facial asymmetry and mandibular prognathism. Skeletal class III malocclusion, maxillary canting and menton deviation to left by 13 mm were detected. Multiple ill-fitting prostheses, unesthetic maxillary anterior prostheses, and several dental caries were found. After pre-operative orthodontic treatment, Le-Fort I osteotomy, sagittal split ramus osteotomy, genioplasty, right mandibular angle augmentation were done for the correction of jaw relation and asymmetry. By diagnostic wax-up after post-operative orthodontic treatment, maxillary full mouth rehabilitation and mandibular posterior restorations were planned out. For better result, clinical crown lengthening procedure was done on #11, 12 and implant was placed on left mandibular first molar area. The patient was satisfied with the final prostheses. Because of his high caries risk, long-term prognosis will depend on the consistent maintenance of oral hygiene and periodic follow-up.

• Journal of Korea Association of Health Promotion
• /
• v.3 no.1
• /
• pp.72-83
• /
• 2005

The present pilot project was executed to recommend a strategy of clonorchiasis control in China. The pilot area of this project was Zhaoyuan, Hailin, and Ningan, Heiloagjiang province. A baseline survey subjecting 4,865 residents in Heilongjiang confirmed Zhaoyuan asa high endemic area and Hailin and Ningan as moderate endemic areas. Six different control strategies were implemented in Zhaoyuan, two were in Hailin, and one was in Ningan. Including the baseline survey and project programs from 2000 to 2004, total 63,274subject-times were examined of their feces for Clonorchiseggs, 26,680 were treated, 10,082 were screened by ELISA, and 6,130 subjects were examined of their liver by sonography. The egg Positive rates in 6 villages of Zhaoyuan were as high as 44.8% 70,0%. Following the protocolof each strategy, the subjected residents were examined of their feces and treated with 25 mg/kg praziquantel, 3 times. Except the control group, all of the villages showed 72.8% to 92.0% reduction of their original egg Positive rates at Zhaoyuan. Mass treatments of all subjected residents in 2001 and 2003 reduced the egg rate from 68.8% to18.7% and 4 annual mass treatments reduced the rate from 44.8% in 2001 to 8.7% in 2004.Selective annual treatments of egg positive subjects reduced the egg rates from 50.8% in2001 to 13.8% in 2004 or from 70.0% in 2001 to 11.6% in 2004, and two treatments in a year reduced the rate from 57.6% in 2001 to 4.6% in 2004. According to repeated treatments, EPG counts decreased remarkably. In moderate endemic areas, the original egg rates were 22.6% and 28.3% in 2001 but were 1.7% and 1.1% after 2 or 3 selective treatments. The present findings of the chemotherapeutic control of clonorchiasis prove that repeated medication is important. The reduction is directly correlated with dose of praziquantel but not with mass or selective treatments. Chemotherapeutic control of reservoirhosts has little effect on reinfection of clonorchiasis because the field along the Songhua-jiang is too wide to be impacted. ELISA confirmed many serologically positive cases to Clonorchisantigen but only a few cases were positive to other antigens (Paragonimus, cysticercus, sparganum). The abdominal soaography visualized intrahepatic bile duct dilatation and periductal echo in 2,002 of 6,070 examined subjects. In addition to these examinations and treatment, health education supplemented tㅗe control activities. The present findings prove clonorchiasis is very widely prevalent and heavily endemic along the rivers in Heiloagjiang. The results suggest that group chemotherapy with praziquantel is effective to reduce endemicity of clonorchiasis. Mass treatment without individual fecal examination is recommended in heavy endemic areas where the egg rate is over 40% while one selective treatment is effective enough in moderate endemic areas.

• Electrical & Electronic Materials
• /
• v.12 no.7
• /
• pp.7-11
• /
• 1999

Fully sealed field emission display in size of 4.5 inch has been fabricated using single-wall carbon nanotubes-organic vehicle com-posite. The fabricated display were fully scalable at low temperature below 415$^{\circ}C$ and CNTs were vertically aligned using paste squeeze and surface rubbing techniques. The turn-on fields of 1V/${\mu}{\textrm}{m}$ and field emis-sion current of 1.5mA at 3V/${\mu}{\textrm}{m}$ (J=90${\mu}{\textrm}{m}$/$\textrm{cm}^2$)were observed. Brightness of 1800cd/$m^2$ at 3.7V/${\mu}{\textrm}{m}$ was observed on the entire area of 4.5-inch panel from the green phosphor-ITO glass. The fluctuation of the current was found to be about 7% over a 4.5-inch cath-ode area. This reliable result enables us to produce large area full-color flat panel dis-play in the near future. Carbon nanotubes (CNTs) have attracted much attention because of their unique elec-trical properties and their potential applica-tions [1, 2]. Large aspect ratio of CNTs together with high chemical stability. ther-mal conductivity, and high mechanical strength are advantageous for applications to the field emitter [3]. Several results have been reported on the field emissions from multi-walled nanotubes (MWNTs) and single-walled nanotubes (SWNTs) grown from arc discharge [4, 5]. De Heer et al. have reported the field emission from nan-otubes aligned by the suspension-filtering method. This approach is too difficult to be fully adopted in integration process. Recently, there have been efforts to make applications to field emission devices using nanotubes. Saito et al. demonstrated a car-bon nanotube-based lamp, which was oper-ated at high voltage (10KV) [8]. Aproto-type diode structure was tested by the size of 100mm $\times$ 10mm in vacuum chamber [9]. the difficulties arise from the arrangement of vertically aligned nanotubes after the growth. Recently vertically aligned carbon nanotubes have been synthesized using plasma-enhanced chemical vapor deposition(CVD) [6, 7]. Yet, control of a large area synthesis is still not easily accessible with such approaches. Here we report integra-tion processes of fully sealed 4.5-inch CNT-field emission displays (FEDs). Low turn-on voltage with high brightness, and stabili-ty clearly demonstrate the potential applica-bility of carbon nanotubes to full color dis-plays in near future. For flat panel display in a large area, car-bon nanotubes-based field emitters were fabricated by using nanotubes-organic vehi-cles. The purified SWNTs, which were syn-thesized by dc arc discharge, were dispersed in iso propyl alcohol, and then mixed with on organic binder. The paste of well-dis-persed carbon nanotubes was squeezed onto the metal-patterned sodalime glass throuhg the metal mesh of 20${\mu}{\textrm}{m}$ in size and subse-quently heat-treated in order to remove the organic binder. The insulating spacers in thickness of 200${\mu}{\textrm}{m}$ are inserted between the lower and upper glasses. The Y\ulcornerO\ulcornerS:Eu, ZnS:Cu, Al, and ZnS:Ag, Cl, phosphors are electrically deposited on the upper glass for red, green, and blue colors, respectively. The typical sizes of each phosphor are 2~3 micron. The assembled structure was sealed in an atmosphere of highly purified Ar gas by means of a glass frit. The display plate was evacuated down to the pressure level of 1$\times$10\ulcorner Torr. Three non-evaporable getters of Ti-Zr-V-Fe were activated during the final heat-exhausting procedure. Finally, the active area of 4.5-inch panel with fully sealed carbon nanotubes was pro-duced. Emission currents were character-ized by the DC-mode and pulse-modulating mode at the voltage up to 800 volts. The brightness of field emission was measured by the Luminance calorimeter (BM-7, Topcon).

• Clinics in Shoulder and Elbow
• /
• v.14 no.1
• /
• pp.67-72
• /
• 2011

Purpose: There are various known methods for arthroscopic rotator cuff repair. The purpose of this retrospective study is to report on the clinical results and anatomical results of UU repair surgery, which is a new repair method. Materials and Methods: We enrolled 156 patients (88 men and 68 women) who underwent UU repair for rotator cuff tears from January 2009 to May 2010 in our hospital. Their average age was 55 years old (range: 38~75 years old) and the average follow-up period was 12 months (range: 6~23 months). For determining the results, we evaluated the VAS for pain, the daily living index (ADL) in the ASES scores, the UCLA and KSS scores, and all these tests were conducted at the first hospital visit and 6 months and 1 year after surgery and at the final follow-up. During the follow-up period, MRI was performed 3 and 6 months after surgery only in the patients who consented to MRI scans to confirm the presence of re-rupture. Results: The average scores of the VAS as a pain indicator decreased from 7.0 before surgery to 2.7 after surgery (p<0.05). The UCLA and KSS scores increased from 22.2 to 32.5 and from 83.7 to 91.5, and the changes was significant (p<0.05). For the active joint range of motion, the average forward flexion was improved from 125 to 175 degrees, the average lateral external rotation was improved from 38 to 58 degrees, and the average abduction was improved from 104 to 169 degrees. Out of a total of 156 patients, re-rupture was observed in 4 cases (3%) of 117 cases (75%) for which MRI was performed (with consent) between 3 and 6 months after surgery. Conclusion: UU repair surgery as arthroscopic repair of rotator cuff tear is a good repair method that shows excellent clinical results and a low re-rupture rate.

• Asia pacific journal of information systems
• /
• v.18 no.4
• /
• pp.57-81
• /
• 2008

Knowledge is an essential strategic weapon for sustaining competitive advantage and is the key determinant for organizational growth. When knowledge is shared and disseminated throughout the organization, it increases an organization's value by providing the ability to respond to new and unusual situations. The growing importance of knowledge as a critical resource has forced executives to pay attention to their organizational knowledge. Organizations are increasingly undertaking knowledge management initiatives and making significant investments. Knowledge sourcing is considered as the first important step in effective knowledge management. Most firms continue to make an effort to realize the benefits of knowledge management by using various knowledge sources effectively. Appropriate knowledge sourcing strategies enable organizations to create, acquire, and access knowledge in a timely manner by reducing search and transfer costs, which result in better firm performance. In response, the knowledge management literature has devoted substantial attention to the analysis of knowledge sourcing strategies. Many studies have categorized knowledge sourcing strategies into intemal- and external-oriented. Internal-oriented sourcing strategy attempts to increase firm performance by integrating knowledge within the boundary of the firm. On the contrary, external-oriented strategy attempts to bring knowledge in from outside sources via either acquisition or imitation, and then to transfer that knowledge across to the organization. However, the extant literature on knowledge sourcing strategies focuses primarily on large organizations. Although many studies have clearly highlighted major differences between large and small firms and the need to adopt different strategies for different firm sizes, scant attention has been given to analyzing how knowledge sourcing strategies affect firm performance in small firms and what are the differences between small and large firms in the patterns of knowledge sourcing strategies adoption. This study attempts to advance the current literature by examining the impact of knowledge sourcing strategies on small firm performance from a holistic perspective. By drawing on knowledge based theory from organization science and complementarity theory from the economics literature, this paper is motivated by the following questions: (1) what are the adoption patterns of different knowledge sourcing strategies in small firms (i,e., what sourcing strategies should be adopted and which sourcing strategies work well together in small firms)?; and (2) what are the performance implications of these adoption patterns? In order to answer the questions, this study developed three hypotheses. First hypothesis based on knowledge based theory is that internal-oriented knowledge sourcing is positively associated with small firm performance. Second hypothesis developed on the basis of knowledge based theory is that external-oriented knowledge sourcing is positively associated with small firm performance. The third one based on complementarity theory is that pursuing both internal- and external-oriented knowledge sourcing simultaneously is negatively or less positively associated with small firm performance. As a sampling frame, 700 firms were identified from the Annual Corporation Report in Korea. Survey questionnaires were mailed to owners or executives who were most erudite about the firm s knowledge sourcing strategies and performance. A total of 188 companies replied, yielding a response rate of 26.8%. Due to incomplete data, 12 responses were eliminated, leaving 176 responses for the final analysis. Since all independent variables were measured using continuous variables, supermodularity function was used to test the hypotheses based on the cross partial derivative of payoff function. The results indicated no significant impact of internal-oriented sourcing strategies while positive impact of external-oriented sourcing strategy on small firm performance. This intriguing result could be explained on the basis of various resource and capital constraints of small firms. Small firms typically have restricted financial and human resources. They do not have enough assets to always develop knowledge internally. Another possible explanation is competency traps or core rigidities. Building up a knowledge base based on internal knowledge creates core competences, but at the same time, excessive internal focused knowledge exploration leads to behaviors blind to other knowledge. Interestingly, this study found that Internal- and external-oriented knowledge sourcing strategies had a substitutive relationship, which was inconsistent with previous studies that suggested complementary relationship between them. This result might be explained using organizational identification theory. Internal organizational members may perceive external knowledge as a threat, and tend to ignore knowledge from external sources because they prefer to maintain their own knowledge, legitimacy, and homogeneous attitudes. Therefore, integrating knowledge from internal and external sources might not be effective, resulting in failure of improvements of firm performance. Another possible explanation is small firms resource and capital constraints and lack of management expertise and absorptive capacity. Although the integration of different knowledge sources is critical, high levels of knowledge sourcing in many areas are quite expensive and so are often unrealistic for small enterprises. This study provides several implications for research as well as practice. First this study extends the existing knowledge by examining the substitutability (and complementarity) of knowledge sourcing strategies. Most prior studies have tended to investigate the independent effects of these strategies on performance without considering their combined impacts. Furthermore, this study tests complementarity based on the productivity approach that has been considered as a definitive test method for complementarity. Second, this study sheds new light on knowledge management research by identifying the relationship between knowledge sourcing strategies and small firm performance. Most current literature has insisted complementary relationship between knowledge sourcing strategies on the basis of data from large firms. Contrary to the conventional wisdom, this study identifies substitutive relationship between knowledge sourcing strategies using data from small firms. Third, implications for practice highlight that managers of small firms should focus on knowledge sourcing from external-oriented strategies. Moreover, adoption of both sourcing strategies simultaneousiy impedes small firm performance.

• Korean Journal of Social Welfare
• /
• v.60 no.3
• /
• pp.31-58
• /
• 2008

This study examines applying the elderly poverty labor hypothesis and skill-biased technological change hypothesis to labor force participation rate(LFPR) of older males in Korea. These hypotheses have hardly been examined on the this group. The analysis is based on the data "Summary of economically active population($1965{\sim}2007$)", "Population projection($1965{\sim}2007$)", "Report on wage structure survey($1993{\sim}2005$)" and "Korea Labor and Income Panel Study($1998{\sim}2006$)". The method employed for this study is logistic regression. The main results from this analysis are summarized in five points. Firstly, Korean older males' LFPR have been increasing since 1965 when industrialization was expanding at full steam. This trend has been different from the decreasing trend of industrialized countries. The second finding is that poor older males' LFPR is, on the average, 5.2% higher than that of non-poor older males from 1998 to 2005. The third result is that the non-elderly man has been increasingly positioned at higher grade occupations, while the elderly man has been held at lower grade occupations. The fourth is that labor demand for highly educated workers has exceeded the increased labor supply of the group, while the demand for low educated workers has decreased far beyond the declined labor supply. As a result, college premium has increased from 139% in 1993 to 157.8% in 2005. The final main implication of this study is that the industrialization theory and modernization hypothesis still holds for the LFPR of Korean older males. However, the elderly affluence hypothesis of the LFPR of older males are hardly persuasive in explaining Korean phenomenon. Especially, we find that the elderly poverty is the main mechanism in determining the Korean LFPR in old ages. This supports the elderly poverty labor hypothesis presented in this study. Skill-biased technological change hypothesis partially explains the LFPR of older man. However, we believe that other factors; human capital specially high school education rather than university education and skill required in less skill biased occupations or the poverty; also have taken effect.

• Clinical and Experimental Pediatrics
• /
• v.50 no.8
• /
• pp.732-739
• /
• 2007

Purpose : A universal standard of the birth weight for gestational age cannot be made since birth weight distribution varies with races, nations and eras. This report aims to establish the birth weight for gestational age patterns by sex, plurality, and parity, specific for Korean live births. Methods : The national birth certificate data of all live births in Korea from January 2000 to December 2004 were used: for live births with gestational age 24 weeks to 42 weeks (n=2,585,5160), mean birth weight, standard deviation and 10th, 25th, 75th and 90th percentile values were obtained for each gestational age group by one week increment. To establish final standard values of Korean birth weight distribution by gestational age, the finite mixture model to eliminated erroneous birth weights was used for respective gestational age. Same as above method the birth weight for gestational age standard by sex, plurality, and parity were completed. Results : The male newborns are more heavier than female during the entire gestational age. The singletons are more heavier than twin during the entire gestational age. The para 2 are more heavier than the para 1 during the entire gestational age. Korean standard was more heavier in 10th and 50th percentile than Lubchenco's standard. Alexander's standard was more heavier in 50th and 90th percentile than Korean standard. Conclusion : These birth weight for gestational age patterns by sex, plurality, and parity are similar to the other standards. I hope that for Korean infants, this curve will help clinicians in defining and managing the large for gestational age infants and also for infants with intrauterine growth retardation.