• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1234-1238
• /
• 2005

As the low power GPS signal is susceptible to interference, interference can seriously degrade the performance of GPS receiver. This paper designs a ANIEF(Adaptive Narrowband Interference Excision in Frequency domain) filter that removes narrow band interferences with low signal loss. This filter uses the pre-correlation technique and attempts to filter out the interference in the frequency domain. The interference excision performance of the designed filter is evaluated for various interferences using the ANIEF filter inserted GPS software receiver and the interference generator. Interferences considered in this paper are single-tone CWI(Continuous Wave Interference), multi-tones CWI, pulsed CWI, and swept CWI. The narrowband interference excision filter in frequency domain is very effective against various interferences and the strong interference with a simple structure. However, the signal power loss is unavoidable while transforming. In this paper, the hamming window and overlap technique are adopted to reduce the signal power loss. Finally, the interference excision performance and the reduced signal power loss of the ANIEF filter are shown.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1096-1098
• /
• 2003

In this paper, the control algorithm and control methods for a combined system of shunt passive filter and series active filter in 3-phase 4-wire system are discussed. Moreover, the 3-phase 4-wire system is widely employed in distributing electric energy to several office building and manufacturing plants. In such systems, the third harmonic and odd multiples of $3^{rd}$($9^{th}$, $15^{th}$, etc.) are termed as triple and zero sequence components that do not cancel each other in the system neutral. As a result, the triple harmonics add together creating a primary source of excessive neutral current. Regarding this concern, this paper presents a new control scheme for a series hybrid active system. This series active power filter acts not only as a harmonic compensator but also as a harmonic isolator. Hence the required rating of the series active filter is much smaller than that of a conventional shunt active filter. However, the performance of the combined system is greatly influenced by the filtering algorithm employed in the active power filter. This paper proposes a series active power filter scheme based on performance function. Some experiments was executed and experimental results from a prototype active power filter confirm the suitability of the proposed approach.

• 한국항행학회논문지
• /
• 제24권3호
• /
• pp.198-204
• /
• 2020

본 논문에서는 GNSS (global navigation satellite system)이 가용하지 않는 상황에서 시간이 지남에 따라 오차가 누적되는 특성을 가진 관성항법장치(inertial navigation system)의 항법 오차를 보상하기 위한 EM-Log (electromagnetic-log) 보정항법 필터를 설계하였다. EM-Log는 해상에서 운동체의 이동 속도를 측정하여 속도 오차를 보정하여 주나 측정된 속도에는 해조류가 포함되어 있기 때문에 적절한 해조류 모델 설계와 추정이 필요하다. 본 논문에서는 해조류 추정을 위해 단일 모델 필터와 IMM (interacting multiple model) 모델 필터 방법론을 제시하고 설계된 필터의 해조류 추정 성능을 확인한 후 해조류 모델 설계가 필터 성능에 어떤 영향을 주는지 분석하였다. 설계된 보정항법 필터의 성능은 시뮬레이션을 이용하여 검증하고 순수항법 대비 필터 성능 향상률을 비교 분석하였다. 단일 모델 필터는 해조류 모델이 동일한 경우 성능이 좋지만 해조류 모델이 동일하지 않을 경우 성능이 저하되는 것을 확인 할 수 있었다. 반면, IMM 모델 필터의 경우 다양한 해조류 모델을 사용하기 때문에 단일 모델필터 대비 안정적인 성능을 유지하는 것을 확인하였다.

• 한국입자에어로졸학회지
• /
• 제12권4호
• /
• pp.145-150
• /
• 2016

During the chemical mechanical planarization (CMP) process, slurry that comprises abrasive particles can directly affect the CMP performance and quality. Mainly, the large particles in the slurry can generate the defects on the wafer. Thus, many kinds of filters have been used in the CMP process to remove unwanted over-sized particles. Among these filters, the point-of-use (POU) filter is used just before the slurry is supplied onto the CMP pad. In the CMP research field, analysis of the POU filter has been relatively exceptional, and previous studies have not focused on the standardized filtration efficiency (FE) or filter performance. Furthermore, conventional evaluation methods of filter performance are not appropriate for POU filters, as the POU filter is not a membrane type, but is instead a depth type roll filter. In order to accurately evaluate the POU filter, slurry FE according to particle size was measured in this study. Additionally, a CMP experiment was conducted with filtered slurry to demonstrate the effects of filtered slurry on CMP performance. Depending on the flow rate and the filter retention size, the FE according to particle size was different. When the small and large particles have different FEs, the total filtration efficiency (TFE) can still have a similar value. For this reason, there is a need to measure the FE with respect to the particle size to verify the effects of the POU filter on the CMP process.

• 전자공학회논문지S
• /
• 제34S권8호
• /
• pp.10-19
• /
• 1997

In this paper, perfodrmance of matched-filter (MF) acquisition scheme is analyzed for a direct-sequence/code-division-multiple-access (DS/CDMA) system in a microcellular environment. Mean acquistion time is used as a performance measure. It is demonstrated that acquisition performance is enhanced using interference suppression filter in a Rician fading channel. To apply for multiuser environments, multiple access interference is considered in the performance analysis. From the numerical results, it is shown that mean acquistion time decreases with the increasing SNR/chip, and acquisition performance is improved as the number of taps of interference suppression filter. It is also shown that mean acquisition time increases with the number of users in the system, and acquistion performance is degraded as the icrease of narrowband interference bandwidth. The analysis in this paper can be applied to a DS/CDMA overlay environment.

• 제어로봇시스템학회논문지
• /
• 제10권7호
• /
• pp.618-624
• /
• 2004

This paper presents a delay dependent fuzzy H_\infty$ filter design method for delayed fuzzy dynamic systems. Using delay-dependent Lyapunov function, the global exponential stability and H_\infty$ performance problem are discussed. A sufficient condition for the existence of fuzzy filter is presented in terms of linear matrix inequalities(LMIs). The filter design utilize the concept of parallel distributed compensation. And the filter gains can also be directly obtained from the LMI solutions. A simulation example is given to illustrate the design procedures and performance of the proposed methods.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.212-216
• /
• 2003

The performance of active power filter depends on the inverter characteristic, the control method, and the accuracy of reference signal generator. The accuracy of reference generator is the most critical item to determine the performance of active power filter. This paper introduces a novel reference signal generator composed of improved adaptive predictive filter. The performance of proposed reference signal generator was verified by means of simulation with MATLAB. The simulation result confirm that the proposed reference signal generator can be utilized for the active power filter.

• 한국군사과학기술학회지
• /
• 제12권6호
• /
• pp.727-732
• /
• 2009

In this paper, the dependence of the Kalman filter-based emitter location algorithm on the initial estimate is investigated. Given all the LOB data, the initial estimate of the emitter location is obtained from the linear LSE algorithm with the former LOB data. Using the initial estimate, the Kalman filter algorithm is applied with the remaining LOB data to update the initial estimate. It is shown that as the number of data used in the calculation of the initial estimate increases, the accuracy of the final estimate is improved and the total computational complexity of obtaining the initial estimate and the final estimate increases. In addition, the dependence of the performance of the Kalman filter algorithm on the predefined constant is illustrated.

• 대한전자공학회논문지
• /
• 제25권7호
• /
• pp.826-835
• /
• 1988

In this paper, we analyze the generation of an image pyramid as a 2-dimensional decimation-interpolation process, and suggest a performance index of FIR filter for decimation and interpolation filter. Until now, most deciamtion and interpolation filters are designed via the approximation of the impulse response of an ideal filter. In this paper, however, we propose a new performance index that minimizes the maximum frequency-weighted mean square error between the desired and the generated interpolated signal, and propose an optimal half-band filter based on the proposed performance index as an example. Some simulation results with real images show that the proposed optimal half-band filter yields a higher PSNR as well as the more preferable image quality, in comparison with other currently used filters with the same computational complexity.

• 한국대기환경학회지
• /
• 제20권6호
• /
• pp.739-748
• /
• 2004

A hybrid dust-collector combining a fabric filter with centrifugal force was developed to enhance the performance of the conventional fabric filter systems and its performances were evaluated to compare to that of the existing dust collector. The pressure drop rapidly increased with increasing the elapsed time and the face velocity in two filtration systems. But the increasing ratio of a hybrid dust-collector compare to the existing dust collector was lower. This results were confirmed from the performance such as cleaning interval, residual pressure drop and dust loading rate. The overall collection efficiency of the hybrid dust-collector was more than 99.6% and this showed a improvement of 0.6～2% than that of the existing dust collector. Especially, the fractional collection efficiency at the particle size of around 1${\mu}{\textrm}{m}$ is about 4% higher than that of the existing dust collector.