• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.10a
• /
• pp.157-161
• /
• 2004

The colse type of engine system, in which the combustion gas after the gas-turbine with high temperature is supplied to the combustion chamber, was selected to increase the energy characteristics in making the rocket engine scheme which makes 1700kN thrust. The nozzle was designed with consideration of film cooling, nozzle efficiency, and the real state of cobmustion gas during the expansion in nozzle. The change of gas state and the composition of the gas through the nozzle was studied by the graphic, too.

• Journal of the Korean Vacuum Society
• /
• v.4 no.S2
• /
• pp.24-29
• /
• 1995

The magnetic amd magneto-optical(MO)properties of Co-based multilayered(ML)films are known to vary sensitively according to the manufacturing methods and the film microstructures. Co/Pd and Co/Pt ML films with ultrathin layers of Co were prepared by alternating deposition in an ultrahigh-vacuum physical-vapor-deposition system. The individual layer thicknesses of the samples were estimated making use of the angular positions of x-ray diffraction peaks. The magnetic and MO properties were investigated, and correlated systematically to the structural parameters of the films. A Kerr spectrometer was self-manufactured to measure the MO properties such as Kerr rotation angle, ellipticity and reflectivity. The rms surface roughness was also measured using atomic force microscopy. Some of the samples showed good properties for MO medium, such as large perpendicular magnetic anisotropy and Kerr rotation, and perfect squareness of the magnetic hysteresis loop.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.07a
• /
• pp.183-184
• /
• 2023

스토리를 제대로 전달하려는 관점에서 제작자는 관객들이 무엇을 보게 할 것인가에 대한 고민이 필요하다. 즉, 관객의 시선을 시종일관 끌고 다녀야 한다. 그러한 관점과 더불어 관객이 일상에서 익숙한 공간감을 스크린 내에서도 확보해 줄 필요가 있다. 그러기 위해서는 영상의 깊이를 충분히 고려해야 하는데 이는 관객의 시선을 유도하는 반면에 현실 공간감을 확보하는 것이다. 스크린 내의 물체들을 자연 그대로의 원근감을 갖도록 촬영 환경을 구성하는 것도 필요하지만 스토리를 전개하는 피사체를 배경과 분리시킴으로써 자연스럽게 초점과 영점을 맞출 수 있도록 장면을 구현하는 것이다. 이를 위해서 제작(production) 단계에서는 촬영기법으로, 후반작업(post-production) 단계에서는 아웃 포커싱 등의 효과를 적용하는 방법 등이 고려될 수 있다. 본 논문에서는 영상의 깊이를 확보해야만 하는 이유와 이의 방법 등을 고찰해 본다.

• Korean Journal of Materials Research
• /
• v.34 no.2
• /
• pp.79-84
• /
• 2024

Thin films of yttria-stabilized zirconia (YSZ) nanoparticles were prepared using a low-temperature deposition and crystallization process involving successive ionic layer adsorption and reaction (SILAR) or SILAR-Air spray Plus (SILAR-A+) methods, coupled with hydrothermal (175 ℃) and furnace (500 ℃) post-annealing. The annealed YSZ films resulted in crystalline products, and their phases of monoclinic, tetragonal, and cubic were categorized through X-ray diffraction analysis. The morphologies of the as-prepared films, fabricated by SILAR and SILAR-A+ processes, including hydrothermal dehydration and annealing, were characterized by the degree of surface cracking using scanning electron microscopy images. Additionally, the thicknesses of the YSZ thin films were compared by removing diffusion layers such as spectator anions and water accumulated during the air spray plus process. Crack-free YSZ thin films were successfully fabricated on glass substrates using the SILAR-A+ method, followed by hydrothermal and furnace annealing, making them suitable for application in solid oxide fuel cells.

• Journal of Radiation Protection and Research
• /
• v.39 no.4
• /
• pp.199-205
• /
• 2014

In the field of neutron detections, $^3He$ gas, the so-called "the gold standard," is the most widely used material for neutron detections because of its high efficiency in neutron capturing. However, from variable causes since early 2009, $^3He$ is being depleted, which has maintained an upward pressure on its cost. For this reason, the demands for $^3He$ replacements are rising sharply. Research into neutron converting materials, which has not been used well due to a neutron detection efficiency lower than the efficiency of $^3He$, although it can be chosen for use in a neutron detector, has been highlighted again. $^{10}B$, which is one of the $^3He$ replacements, such as $BF_3$, $^6Li$, $^{10}B$, $Gd_2O_2S$, is being researched by various detector development groups owing to a number of advantages such as easy gamma-ray discrimination, non-toxicity, low cost, etc. One of the possible techniques for the detection is an indirect neutron detection method measuring secondary radiation generated by interactions between neutrons and $^{10}B$. Because of the mean free path of alpha particle from interactions that are very short in a solid material, the thickness of $^{10}B$ should be thin. Therefore, to increase the neutron detection efficiency, it is important to make a $^{10}B$ thin film. In this study, we fabricated a $^{10}B$ thin film that is about 60 um in thickness for neutron detection using well-known technology for the manufacturing of a thin electrode for use in lithium ion batteries. In addition, by performing simple physical tests on the conductivity, dispersion, adhesion, and flexibility, we confirmed that the physical characteristics of the fabricated $^{10}B$ thin film are good. Using the fabricated $^{10}B$ thin film, we made a proportional counter for neutron monitoring and measured the neutron pulse height spectrum at a neutron facility at KAERI. Furthermore, we calculated using the Monte Carlo simulation the change of neutron detection efficiency according to the number of thin film layers. In conclusion, we suggest a fabrication method of a $^{10}B$ thin film using the technology used in making a thin electrode of lithium ion batteries and made the $^{10}B$ thin film for neutron detection using suggested method.

• Journal of Bio-Environment Control
• /
• v.5 no.2
• /
• pp.174-186
• /
• 1996

This study was carried out in order to understand the plan, design, constructing and actual condition of management of modernized horticultural facilities in Kyungpook Province which had been constructed from 1992 to 1995 funded by Government support. The aim of this study is to provide reference data for success of the forth project. It was performed by making up a question about driving of project and management condition of equipment after constructing. The results obtained from this study are as follows: 1. 73.5% of facilities horticulture farmhouse recognized that the prospect of greenhouse is bright, but 92.5% of the farmhouse also recognised that they need technical consultation on protected horticulture farming. Therefore, technical educations would must be enhanced about foundation of greenhouse and cultivation technique. 2. The holding times of explanatory meetings, cause of understanding to farmhouse, were one or two times in greenhouse construction, and 62.5% of the farmhouse expressed the insufficiency at the explanation and educational data. For this reason, it was judged that the construction contract had been delayed more than 5 months in 49.3% of the farmhouse after the decision of project budget. 3. In constructing after a contract, the rates of construction delay is 53.4% and defect occurrence is 41.1%. The biggest reasons of construction delay was insufficiency of worker and materials supply. Each percentage is 29.1%. And the reason of defect occurrence is badness of machinery equipment(62.9% ). 4. In management of greenhouse, a pipe-constructed plastic film greenhouse changes plastic film every one and three years because of sticking dust on plastic film. It was needed to about in cleaning technique of coverings. Because that used 3-5 years only half of the expected life span. 5. The order of broken rating in the subsidiary equipment is like this lollop ventilator (42.8%), a general control system(33.3%) especially, in the case of a general control system, the rate of all family can control is 52.7%. so, it is time to develop easy control equipment which every one could use as soon as possible. 6. When choose heat generator as decide capacity, the most priority is the mount of heat generator the percent is 45.5% heat generator and as decide model, the private purchase's percent is 77.3%. It is higher than a public bidding heat generator the percent is 22.7% heat generator when it compare with a public bidding. In the case of $CO_2$ generator, using rate is only 19.0%. The using rate is very low, so it needs education how to use depends on the way of the subsidiary equipment. 7. In the case of seedlings, it is asked to use factory-processed seedling effectively. because it's difficult to get security of labors(58.8%), hoped crops (55.9%) access same crops(29.4%) much more and changing of crops depends on market situation. that is the main reason the lack of knowhow.

• Archives of design research
• /
• v.20
• /
• pp.253-262
• /
• 1997

The era of film has begun as a few media critics had anticipated already. The interestings of visual designers has asked to being with images in the processing and changing of varied image culture are different from the era of print media. It is reason to being with images that are generalizing of video culture. Now the film of images that made from popular advertisings and goods influenced by films has come. At first to being with image to visual designers need to understand films and to join making films. In films, visual designers make strengthen in part of credit titles. Credit titles are elements in films with the form of text to help understanding in the beginning and closing part of films. Credit title design has begun first by American visual designer Saul Bass as p pioneer position and have made to be varied film credit technics of computer. The advanced of technics have to think aspects of meaning of titles in the film of '007' movie series through 60s &70s. In 80s more technics have developed to being varied credits to films. And after all, in 90s there are films with almost varied titles. In Korean films ars less varied than that of Amenrican's and of French, in this study I hope to develope more varied Korean credit titles in near future.

• The Journal of the Korea Contents Association
• /
• v.17 no.4
• /
• pp.132-146
• /
• 2017

Over the years(1971 to 1987), only 20 Korean film production companies had been granted the exclusive rights to make Korean films in Korea and to import foreign films with a quota system. They had been making trashy Korean movies to secure import quotas of foreign films. Newcomer's entry of market had also been limited and the growth of Korean films through innovation had been hampered. In the same period, The annual number of Rookie director is 10, the portion of debut films of all Korean films is 10.62%, and the audience portion of debut is only 10.5% of Korean movie audience. From 2004 to 2016, total number of rookie directors is 874, and 61.72% of 1,416 directors who made his debut over the 46 years from 1971 to 2016. This is far more than the number of directors who debuted for the last 32 years. From 2004 to 2016, the annual number of rookie directors is 62.15 and their debut film occupies 39.58% of the total amount of Korean movies released and 32.8% of the audience number. Since the full opening of the domestic market to foreign films industries in 1988, the liberalization of independent film production in 1999, as a result of innovation of a competitive system, the Korean movies have been loved by audiences. However, there are concerns that the decline of the screen quota in 2006, the monopoly of the 4 major distributors, increase in indie movies and Semi-adult movies for VOD, could be the potential threat for future innovation in Korean cinema.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.328-334
• /
• 2020

In this paper I proved that the intention of the movie is to put the reader at the crossroads of choice, which is still in progress, in this context confirmed that the storytelling is very enlightening and popular. This was demonstrated by the thing of making a story the charactor's Affects process itself in the story and a change in the point of view from witness to participant in the discourse. Jang Hoon seeks to reconstruct the Gwangju Democratic Movement through Kim Man-seop, a character who now lives here with trauma. Faced with a sympathetic message from a common and familiar figure around us, such as a taxi driver, it should be said that the goal was to get the audience to accept past gruesome incidents as part of us. The film uses Affects as a way to make the 1980s "Them" become "we" and replace the 37-year-old incident with our modern story. Soon, the film's intention is to turn Gwangju's Democratic movement from "There, Their Story" to "Here, Our Story." That's why popular storytelling was needed and concluded that it was the popularity the film acquired.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.56 no.2
• /
• pp.113-118
• /
• 2011

This study was aimed to develop blend films by rice by-product (rice-hull and rice-bran) and bio-degradable materials. The rice by-product was firstly prepared from the pulverizing for making fine powder. Bio-degradable materials could be prepared by melting at high temperature. The mixture of the fine powder of rice by-product and melted bio-degradable materials was then blended and cast into films. The obtained films were investigated on their morphology, secondary structures and properties by using SEM, ICP and ASTM, respectively. Mechanical properties and degradability of these films were measured and compared to those of the PE films. Mechanical strength of bio-films was higher than that of PE films, however elongation ratio showed lower percent than that of PE film. In addition, bio-film could be degraded into fragments within 3 months under the field condition of normal upland crop cultivation. Bio-degradable mulching film indicated great potential for agronomic use as a new source of bio-degradable material.