Journal of the Korean Association of Oral and Maxillofacial Surgeons
/
제28권4호
/
pp.302-309
/
2002
In order to improve the success rate of implants, various implant designs have been developed. Although there have been enough efforts to handle the surface of the implant with careful choice of material and mechanics so that the bone and the implant can be tightly joined together, they have still failed to play the role of periodontal ligaments of the natural teeth in the past. The role of periodontal ligaments is very important since it can improve the initial stability of implant by absorbing the impacts. The purpose of this study is, thus, to test the possibility of alleviating the impact when the surface of the implant was coated with chitosan, a natural polymer, and making sure that the coated material stayed on. Then, the condition of newly developed bone formation and the degree of inflammation in response was closely observed in the surface level. In the main experiment, Chitosan coated implant ($3.3mm{\times}7mm$) was implanted on both the right and the left side of rabbit's femur. The animals were each sacrificed on the $1^{st}$, $2^{nd}$, $3^{rd}$, $7^{th}$, $14^{th}$, $21^{st}$ and 28th day. The process was observed under an light microscope after the Toluidin Blue staining. From the experiment, it was found that the chitosan was evenly distributed on the surface of the screws, and the implant was adjoined with adjacent bone. There was a sign of inflammation on the $3^{rd}$ day, but on the $14^{th}$ day, the formation of woven bone and newly formed bones were noticed. Also, chitosan filled the gap was formed between the implant and the newly formed bone. The implant, the chitosan and the newly formed bone were forming one unit as a result. Therefore, it was found that chitosan coated implant could absorbe the impact in the initial stage of implant.
유구치 1급 와동의 복합레진 수복 시 C-factor가 가장 크게 나타나며 중합수축에 의한 응력도 가장 크게 나타난다. 이 실험에서는 응력이 각 와동벽 위치에 따라 다르게 나타나는 양상을 microtensile bond strength(MTBS)실험을 통해 확인해보았다. 하악 제2유구치 20개를 두 개의 군으로 나누었다. 각각 다른 종류의 복합레진으로 수복하였고 개별 치아에서 각각 치수벽 시편과 축벽 시편을 얻어 총 4개의 군으로 나누었다. MTBS를 측정하였으며 통계적 유의성을 student T-test를 통해 검정하였다. ZP: Filtek Z250- 치수벽, ZA: Filtek Z250- 축벽, SP : Filtek Supreme - 치수벽, SA: Filtek Supreme - 축벽, 다음과 같은 결과를 얻을 수 있었다. 1. ZP군과 ZA군, SP군과 SA군 사이에서는 유의한 차이가 존재하였다(p<.001). 2. ZP군과 SP군, ZA군과 SA군 사이에서는 유의한 차이가 존재하지 않았다(p<.001).
한국인 소아의 치면세균막에 존재하는 mutans streptococci종 및 생물형의 발현빈도와 치아우식경험지수와 상관관계를 알아보기 위하여, 조선대학교 치과병원에 내원한 12세 미만 113명의 소아 환자의 치아우식경험지수를 구하고, 이들의 상하 악 유전치 및 유구치의 협면 및 설면의 치면세균막 샘플을 채취하여 mutans streptococci를 mitis-salivarius bacitracin 배지에서 선택적으로 분리하였다. 이들의 biotype을 알아보기 위해 생화학적 검사를 실하였고, 이들의 종 수준에서의 동정을 위해 dextranase 유전자를 표적으로 하는 중합효소연쇄반응을 시행하여 하였다. 113명의 환자 중에서 40명의 치면세균막에서 40 균주의 mutans streptococci이 검출되었다. 이들 중 생물형 제 I 형(45%)이 가장 많이 검출되었으며, 그 다음으로 제 IV 형(32.5%), 제 II 형(15%), 제 V 형(5%) 제 III 형(2.5%) 순으로 검출되었다. 또한, 종 수준에서의 발현빈도를 알아본 결과 S. mutaus가 69%, S. sobrinus는 31%였다. Mutans streptococci 종 또는 생물형에 따른 환자의 치아우식경험지수간의 차이는 없는 것으로 조사되었다(p>0.05). 이상의 결과를 종합할 때, 한국인의 소아의 구강 내에 존재하는 mutans streptococci중 생물형 제 I 형인 S. mutans가 가장 높은 빈도로 존재하며, 치아우식증이 세균학적 요소만이 아닌 기타 여러 원인요소에 의해 발병되는 다른 여러 연구 결과와 일치함을 알 수 있었다.
이 연구의 목적은 다양한 산성 환경에서 규산 삼칼슘 재료인 Biodentine$^{(R)}$, Theracal$^{(R)}$, ProRoot MTA$^{(R)}$의 압출강도를 측정하고 표면형태를 관찰하는 것이었다. 각각의 재료에 대해 샘플을 4개의 그룹으로 나누었다. 산성 조건 그룹은 pH 4.4, 5.4, 6.4의 부티르산 조건에서, 대조군 그룹은 pH 7.4의 인산완충식염수 조건에서 4일간 $37^{\circ}C$에서 보관하였다. 이후 압출강도를 측정하고 표면 형태를 분석하였다. Biodentine$^{(R)}$과 Theracal$^{(R)}$은 모든 산성 조건에서 ProRoot MTA$^{(R)}$ 보다 더 높은 압출강도를 보였고 pH 감소에 따라 압출강도가 감소하였다. 주사전자현미경을 이용한 관찰 결과 재료들 모두 산성 조건에서 표면 형태에 상당한 변화를 보였다. 결론적으로, Biodentine$^{(R)}$과 Theracal$^{(R)}$은 ProRoot MTA$^{(R)}$와 비교하여 더 높은 압출강도를 보였다. 또한 산성 조건은 규산삼칼슘 재료들의 압출강도와 미세구조를 약화시킬 수 있다.
본 연구는 복합레진 적층방법에 따른 복합레진의 수축양상을 스트레인 게이지를 이용하여 비교 평가하고자 하였다. 사용된 광중합기의 광원은 light-emitting diode(LED)와 plasma arc lamp(PAL)이었으며, 복합레진은 Filtek $Z350^{TM}$를 사용하였다. 교정 치료를 목적으로 발거된 60개의 소구치를 대상으로 하여, 교합면에 와동을 형성하고 일회충전법, 수평적층법, 사면적층법으로 나누어 복합레진을 충전하여 치면에 발생된 strain과 응력을 측정하였고, 법랑질 표면에 시편을 부착하여 동일한 적층방법으로 충전한 후 전단결합강도를 측정한 결과 다음과 같은 결론을 얻었다. 1. Strain의 변화를 살펴보면, LED와 PAL 조사군 모두 와동의 협설면에서는 주로 팽창이 일어났다가 시간이 지남에 따라 서서히 수축하는 양상을 보여주었다. 2. 와동의 근원심면에서는 팽창과 수축이 반복적으로 나타나면서 서서히 수축량이 증가하였다. 3. LED와 PAL 조사군 모두 적층방법 간의 응력 차이는 없었다(p>0.05). 4. LED 및 PAL 조사군 간의 응력 차이는 협면에서만 존재하였다(p<0.05). 5. 전단결합강도 측정 결과 LED 군에서는 사면적층법이 일회충전법, 수평적층법 보다 유의하게 낮게 나타났으나(p<0.05), PAL 광조사군에서는 유의차가 없었다(p>0.05). 6. 각 치면에 발생된 응력은 전단결합강도보다 낮았다(p<0.05).
Objectives: The aim of this study was to evaluate the oral health status and behavior in Korean diabetic adults. Methods: The study subjects were 11,840 adults who participated in the fifth Korea National Health and Nutrition Examination Survey(2010-2012). Diabetic status was defined by doctors and fasting blood sugar(FBS) level. Oral health status was assessed by decayed-missing-filled teeth(DMFT), community periodontal index(CPI), periodontal disease, denture needs, limitation of oral function, and chewing difficulty. The oral health behavior was evaluated by oral examination within a year, brushing times a day, and use of auxiliary oral product. The data were analyzed by descriptive analysis, chi-square tests and multiple logistic regression analyses. Results: The prevalence rate of diabetes mellitus diagnosed by doctor and FBS was 8.3% and 10.2%, respectively. The prevalence rate of periodontitis was 25.4%. The proportions of $DMFT{\geq}20$, $CPI{\geq}3$, periodontal disease, denture needs, oral function limitation and chewing difficulty in the confirmed diabetic group by doctor were significantly higher than those of the non-diabetic group(p<0.05). In multiple logistic regression analysis, the adjusted odds ratio(aOR) for periodontal disease(aOR=1.73, 95% CI=1.41-2.12), presence of denture needs(aOR=1.40, 95% CI=1.06-1.84), limited oral function(aOR=1.43, 95% CI=1.15-1.78) and chewing difficulty(aOR=1.41 95% CI=1.13-1.77) in diabetic subjects were significantly higher than those of the non-diabetic subjects. There were similar associations between diabetes defined with FBS and oral health. In oral health behavior, diabetic subjects had significantly lower odds ratios for oral examination(aOR=0.76, 95% CI=0.60-0.98), brushing time ${\geq}2$ times(aOR=0.73, 95% CI=0.57-0.93), and auxiliary oral products(aOR=0.74, 95% CI=0.59-0.94). Conclusions: There was a significant relationship between oral health status and behavior in Korean diabetic adults. Further study is needed to evaluate the underlying mechanisms between diabetes mellitus and oral health status.
In this study, adaptation of compomer to saliva contaminated dentin was evaluated with scanning electron microscope(SEM) and confocal laser scanning microscope(CLSM). For the SEM study, the occulusal surfaces of thirty two molar teeth were grounded to exposure dentin surfaces. The specimen were randomly assigned to control and three experimental groups with four samples in each group. In control group, Dyract and F-2000 compomer were bonded on the specimens according to the manufactures direction. Experimental groups were subdivided into three groups. They were contaminated with saliva on dentin surfaces ; Experimental group 1 : Saliva was dried with compressed air. Experimental group 2 : Saliva was rinsed with air-water spray and dried. Experimental group 3 : After polymerization of an adhesive, they were contaminated with saliva, and then saliva was rinsed with air-water spray and dried. Dyract and F-2000 compomer were bonded on saliva-treated dentin surfaces. The interfaces between dentin and compomer were observed with SEM. For the CLSM study, Class V cavities were prepared in buccal and ligual surfacess of thirty two molars. The specimens were divided into control and experimental groups. Class V cavities in experimental group were contaminated with saliva and those surfaces in each experimental groups received the same treatments as for the SEM study. Cavities were applied Prime & Bond 2.1 and F-2000 compomer primer/adhesive that were mixed with fluorescein, and then were filled with Dyract and F-2000 compomer. Specimens were embedded in transparent acrylic resin and sectioned buccolingual1y with diamond wheel saw, and then mounted on cover slide for CLSM study. The interface between cavity and compomer was observed by fluoresence imaging with a CLSM. The results were as follows : 1. In SEM exammination of Dyract group, control group, experimental group 2, 3 showed close adaptation to dentin and hybrid layer of $3{\sim}4{\mu}m$ diameter. Interfacial gap between compomer and dentin in experimental group 1 was wider than in control group. 2. In SEM examination of F-2000 group, adaptation to dentin of control group was closer than Dytact control group, but hybrid-like layer was not observed. Interfacial gap between compomer and dentin in experimental group 1 was wider than in Dyract experimental group 1. 3. In dissolution specimens of Dyract and F-2000 group, resin tags penetrated through dentinal tubules in control group and experimental group 1 and 3, but the penetration of resin tag was irregular and partial in experimental group 1. 4. In CLSM exammination of Dyract and F-2000 group, adhesive patterns of control and experimental groups showed same as in SEM. This result suggests the treatment methods, rinsing & drying, repeating all adhesive procedures, will produce good effect on adaptation of compomer to dentin if the dentin surface or polymerized adhesive is contaminated by saliva.
이 연구의 목적은 spreader를 전기적으로 가열, 냉각시킬 수 있는 Endotec을 이용하여 가온 측방가압 근관충전한 근관에서 근단공을 통한 누출의 정도를 정선적 및 정량적으로 측정하여 근관폐쇄효과를 평가하는데 있다. 발거된 단근치 140개를 4개군으로 나누어 45번 file 크기까지 근관형성하고, sealer를 사용한 측방가압법 및 가온 측방가압법, sealer를 사용 않은 가온 측방가압법 및 고온 용융 gutta-percha 주입법으로 근관충전하고 2% methylene blue 용액에 24시간 경과시킨 다음 색소침투 정도를 정선적 및 정량적으로 측정하였다. Sealer를 사용한 가온 측방가압 충전법은 sealer를 사용한 측방가압법 보다 정선적 및 정량적 측정 모두에서 색소침투는 적게 나타났으나 통계학적 유의성은 없었다. Sealer를 사용한 가온 측방가압 충전법은 sealer를 사용 않은 가온 측방가압 충전법 및 고온용융 gutta-percha 주입 충전법 보다 정선적 및 정량적 측정 모두에서 유의성 있게 적은 색소침투를 보였다 (p<0.05). 가온 측방가압 근관충전법의 근관폐쇄효과가 우수하였다는 증거는 통계학적으로 검증되지 않았다. 정선적 측정치와 정량적 측정치 사이에는 유의한 상관관계가 있었다(r=0.4459, p<0.05).
This study compared the dentin adhesion to composite resin according to air-dry, blot dry, application of rewetting agent on air-dry or blot dry dentin surface by microleakag test and SEM observation. For microleakage test, class V cavity preparations with dentinal margins were prepared on both buccal and lingual surfaces of 40 extracted human molars. For SEM observation, occlusal dentin of 20 extracted human molars were exposed. After etched the dentin, prepared teeth were randomly divided into four groups; D group: air dry for 10-15 sec., B group: blot dry with moist cotton pellet, D-R group: air dry and rewet with Aqua-Prep F for 20 sec., B-R group: blot dry and rewet with Aqua-Prep F for 20 sec. Treated cavities and surfaces were filled or constructed using One-Step adhesives and Aelitefil composite resins. Specimens were stored in distilled water for 24 hours. For microleakage test, the specimens were thermocycled and soaked into 2% methylene blue. The specimens were sectioned longitudinally and evaluated for microleakage under steromicroscope. The data were statistically analysed by Kuskal-Wallis Test, Mann-Whitney and Wilcoxon signed ranked tests. For SEM observation, the specimens were bisectioned mesiodiatally. After decalcified and deproteinized, specimens were observed under SEM. The results of this study were as follows; 1. The microleakges on dentinal margin were the highest in D group compared with B group, D-R group, and B-R group(p<0.05). But there was no significant difference between B group, D-R group and B-R group. 2. D group showed gap and a few resin tags between dentin and composite resin. 3 B group, D-R group, and B-R groups showed close adaptation between dentin and composite resin. It showed that resin rags in B group were numerous and long, in D-R group were few and short, in B-R group were numerous and short or long. 4. Adhesive layer showed in D-R group ($10{\;}\mu\textrm{m}$) and B-R group ($3{\;}\mu\textrm{m}$) In conclusion, use of rewetting agent to dry dentin was efficient to dentin adhesion, also it did not provide reverse effect on blot dry dentin.
본 연구의 목적은 다양한 교합하중 조건하에서 아말감, 복합레진, 세라믹 인레이, 그리고 금 인레이로 수복한 근관치료된 상악 제2소구치의 음력분포를 3차원 유한요소법으로 분석하는 것이다. 발치된 상악 제2소구치를 이용하여 근관치료된 3차원 유한요소모형을 제작하였다. 제작된 소구치 모형의 근관와동을 위 4가지 재료로 각각 수복한 후, 협측교두 (Load-1) 또는 설측교두 (Load-2)에 500 N의 하중을, 설측교두와 근심변연에 총 170 N의 하중 (Load-3)을 가하였다. 세 가지의 하중조건 하에서 각 수복물에 따른 협측과 설측의 치경부 그리고 교합면의 정중구에서 나타나는 인장응력의 분포양상을 ANSYS 프로그램으로 분석하여 다음과 같은 결과를 얻었다. 1. 모든 수복물의 경우에서 Load-1에서는 설측의 치경부, Load-2에서는 협측의 치경부에서 높은 응력이 관찰되었고 수복물 종류에 따른 차이는 관찰되지 않았다. 2. 모든 수복물의 경우에서 교합면의 하중점 근처 와정중구를 따라 높은 응력이 관찰되었고 수복물 종류에 따라 약간의 차이가 관찰되었다. 3. 모든 수복물의 경우에서 Load-3에서는 하중점 근처에서 높은 응력이 관찰되었고 수복물 종류에 따른 차이는 관찰되지 않았다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.