• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.3
• /
• pp.1-7
• /
• 2018

As part of a research dedicated to the field evaluation of the durability of concrete subjected to freezing-thawing, this study analyzes the relationship between the surface roughness and the relative dynamic elastic modulus through image analysis. Four mix compositions with water-to-binder ratios (W/B) of 40%, 50%, 60% and 70% and without AE agent were considered to provoke early freezing. The basic physical properties of the mixes including the relative dynamic elastic modulus and the compressive strength were first evaluated experimentally according to W/B. Then, tests were performed to measure the surface roughness followed by photographs and SEM image analysis. The measured surface roughness tended to increase with larger number of freezing-thawing cycles regardless of W/B. The relative dynamic elastic modulus appeared to increase gradually with the number of cycles for the relatively denser mixes with W/B of 40% and 50%. Besides, the surface roughness increased only at rupture for the mixes with W/B of 60% and 70%. Moreover, the analysis of the photographs of the surface of the mixes with W/B of 40% and 50% revealed that the degradation progressed gradually from the surface with the freezing-thawing cycles. However, for the mixes with W/B of 60% and 70%, apparent change of the surface remained very insignificant until rupture at which damage like cracking could be observed. Consequently, the analysis of surface photograph or the measurement of the surface roughness presented some limitation in assessing the degree of freezing-thawing-induced degradation in case of relatively porous specimens. On the other hand, the photograph and surface roughness appeared to be sufficient for assessing such degradation for the mixes with W/B of 40% and 50%. Accordingly, the image of the surface and the surface roughness are potentially applicable on site for the assessment of freezing-thawing damages in relatively dense mixes.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.4
• /
• pp.317-323
• /
• 2004

This study was carried out to determine the effect of seed method and seeding rate on the desirable agronomic characteristics and yield of forage barley(Hordeum vuigare) at paddy field, National Livestock Research Institute, RDA, Suwon from October 2001 to May 2003. The experiment was arranged in a spilt plot design with three replications. Main plots consisted of tow seed method; Broadcasting and drilling, Sub-plots consisted of seeding rates; 130. 160, 190 and 220 kg/ha. The results obtained were summarized as fellows ; The resistance of cold, disease and lodging of barley for the seeding method and seed rate were not different. And dry matter percentage of barley for a seeding method of 130 kg/ha at the broadcasting was the lowest of $32.0\%$, and that for the drilling at 130 kg/ha was $32.7\%(P<0.05). Fresh yield of barley for a seeding method of drilling at 130 kg/ha was the highest of 32,073 kg/ha, and that for a seeding method of broadcasting at 130 kg/ha was the lowest of 20,944 kg/ha(P<0.05). Dry matter yield of barley for a seeding method of drilling at 160 and 130 kg/ha were the highest 9,170 and 9,138 kg/ha, and that fur a seeding method of broadcasting at 130 kg/ha was the lowest of 5,710 kg/ha(P<0.05). Based on the results of this experiment, it appears that the seeding method and rate of barley could be enhanced by drilling from 130 to 160 kg/ha, and broadcasting from 190 to 220 kg/ha. respectively.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.37 no.1
• /
• pp.28-34
• /
• 2017

A new naked oat cultivar, 'Jungmo2005'(Avena nuda L.), was developed for food and forage use by National Institute of Crop Science, RDA in 2010. It was derived from a cross between $F_1$['Early80'/'Gwiri33'] and $F_1$['Early80'/'Gwiri23']. 'Early80', a covered oats, has early heading and high yielding, while 'Gwiri23' of covered type and 'Gwiri33' of naked type has early heading with large-size grain. 'Jungmo2005' has the characteristics of narrow and long leaves of pale green color, middle diameter culm of yellow color and medium grain of whitish yellow color. Cultivar 'Jungmo2005' had 2 days earlier heading date (May 9) than the check cultivar 'Seonyang' (May 11) in field condition. The 'Jungmo2005' showed better winter hardiness than that of the check cultivar, and similar to the check cultivar in respect to lodging resistance. The 'Jungmo2005' had 105 cm of culm length, 21.5 cm of spike length, 658 spikes per $m^2$, 82 grains per spike, 23.3 g of 1,000-grain weight, and 622 g of test weight. The grain yield of 'Jungmo2005' was averaged $3.38MT\;ha^{-1}$, which was 6% higher than that of the check. Average forage fresh and dry matter yield of 'Jungmo2005' harvested at milk-ripe stage were 44.8 and $12.6tone\;ha^{-1}$, respectively, compared with 47.5 and $12.5tone\;ha^{-1}$ of the check. The protein content of the 'Jungmo2005' was similar to the check (7.6% and 7.5%, respectively), while ADF (28.6%) and NDF (51.5%) were lower than the check (31.4% and 57.0%, respectively). TDN content and RFV were higher than those of the check (66.3%, 120.3 and 64.1, 105.2, respectively). 'Jungmo2005' is recommended for fall sowing cropping only in the south area where daily minimum mean temperatures are averaged higher than $-4^{\circ}C$ in January, and it should not be cultivated in mountain areas, where frost damages is likely to occur. The areas would do better only to sow in spring season.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.37 no.2
• /
• pp.161-167
• /
• 2017

This experiment was conducted to comparison study on the productivity for certified varieties of import adaptability of silage corn in Pyeongchang area. Total eight varieties (Gangpyeongok, 31N27, 32P75, 32W86, P3156, P3394, DK 689 및 DK 729) were evaluated. The experimental design was 8 treatment of randomized block with three replications. Corn varieties were cultivated in experimental field of Pyeongchang campus, SNU from 1 May to 2 September, 2015 and plot size was $15m^2$. Plant height of 32W86 and ear height of Gwanpyeongok was the highest (p<0.05). Tasseling and silking date was 27 July-3 August and silking occurred after 1-3 day of tasseling. Average day to silking was 92 days and that of 31N27 variety was short (p<0.05). The varieties of DeKalbo Company (DK 689 and DK 729) required more times to silking. Average GDD (growth degree day) of eight varieties was $1,023^{\circ}C$ and P3352 was the lowest GDD. In the trials of resistance evaluation, P3394 was strong in disease, P3156 was the highest in insect. All varieties did not show the lodging and variety of DK 729 showed the highest stay green score (p<0.05). Average dry matter content was 30.77%, it showed higher trend in DM. 32W86 was the highest DM content among the varieties, but there was no significant difference among varieties (p>0.05). The weight per ear was the highest in 32W86 and the lowest in Gwanpyeongok. The ration of ear to whole plant was higher in 32W86 and P3394, but it was not found the significant difference (p>0.05). Average yield of fresh and DM was 59,017 and 13,476 kg/ha, respectively. DK 689 showed higher DM and TDN yield than others, but there was not significant difference (p>0.05). According to results, the difference of productivity was not found among certified variety of import adaptability of silage corn. The varieties Gwanpyeongok, 32W86 and 32P75 would be recommendable in Pyeongchang area for stable cultivation.

• KSBB Journal
• /
• v.20 no.5 s.94
• /
• pp.376-382
• /
• 2005

Avermectin (AVM) $B_{1a}$ produced by Streptomyces avermitilis via polyketide pathway is a secondary metabolite with powerful anthelmintic and insecticidal activities, thus being used as an efficient agent in the field of agriculture and animal health. It has been reported that a precursor for AVM $B_{1a}$ biosynthesis was isoleucine and the biosynthetic pathway of AVM $B_{1a}$ was closely similar to that of fatty acid. Based on understanding of the biosynthetic pathway of AVM $B_{1a}$, we intended to screen various mutants resistant against O-methyl threonine (OMT), an isoleucine-anti metabolite, and/or mutants resistant against p-fluoro phenoxy acetic acid (pFAC), an inhibitor of fatty acid biosynthesis. It was inferred that these mutants could produce AVM $B_{1a}$ more efficiently, due to the acquired capability of not only overproducing isoleucine intracellularly but also channelling metabolized carbon-sources into the polyketide pathway, thus leading to enhanced biosynthesis of AVM $B_{1a}$. The resulting mutant (PFA-1 strain) resistant against 100 ppm of pFAC was able to produce approximately 42 fold higher amount of AVM $B_{1a}$ compared to the parallel mother strain (4,200 vs. 100 units/l). In addition, through the process of continuous strain improvement program carried out by gradually increasing the OMT concentration, it was possible to obtain a more attractive mutant with greater AVM $B_{1a}$ production capacity (9,000 units/l). Notable was that significantly higher producer (12,000 units/l) could be selected through further screening of the resistant mutants, this time, to even higher concentration of PFAC. Meanwhile, through the analysis of AVM Bla production histograms (i.e., number of strains according to their AVM $B_{1a}$ biosynthetic ability) for the earlier strains in comparison with the high producers having the characteristics of resistance to OMT and pFAC, it was found that production stability of the high-yielding producers were remarkably improved, as demonstrated by the fact that larger proportion of the mutated strains had greater capability of AVM $B_{1a}$ biosynthesis ($71\%$ in the range between 5,000 and 7,000 units/L; $47\%$ in the range between 6,000 and 7,000 units/l). Based on these consequences, it was concluded that the rational screening strategy based on the understanding of the biosynthetic pathway of AVM $B_{1a}$ was very effective in obtaining high-yielding mutants with the features of enhanced production stability.

• Korean Journal of Plant Resources
• /
• v.33 no.2
• /
• pp.80-85
• /
• 2020

A new Gomchwi cultivar 'Soomany' was derived from a cross between Gomchwi (Ligularia fischeri (Ledeb.) Turcz.) and Handaeri-gomchwi (Ligularia fischeri var. spiciformis Nakai). The investigation and selection of growth and yield characteristics were conducted from 2007 to 2015 in field and greenhouse of Highland Agriculture Research Institute, National Institute of Crop Science, Rural Development Administration, in Korea. On a newly developed cultivar 'Soomany', color of petiole ear is light green, petiole trichome is existent, trichome and light on the back of the leaves don't exist, and density of leaf vein is degree 4. Plant height, leaf length, leaf width and petiole length are 77.1, 22.3, 21.5 and 57.2 cm, respectively in the growth characteristics of the 2_nd year. Plant size was also higher than that of 'Sammany' generally. Bolting date was on August 15. Flowering date was on September 19, about 9 days later than 'Sammany'. 'Soomany' and 'Sammany' had 149 and 133 leaves per plant, respectively. Total yield of 'Soomany' (1,623 g/plant) made a very good comparison with that of 'Sammany' (1,385 g/plant). 'Soomany' showed harder leaves (25.8 ㎏/㎠) than 'Sammany' (20.8 ㎏/㎠), whereas 'Soomany' had thinner leaves (0.53 mm) than 'Sammany' (0.62 mm). 'Soomany' variety has shown strong resistance to powdery mildew disease compared to 'Sammany'. In May 2019, the right of variety protection of 'Soomany' was registered as a new Gomchwi variety (Register No. 192).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.463-466
• /
• 2017

The purpose of this paper is to develop a module capable of all-directional driving different from conventional wheeled robots, and to solve the problems of the conventional mobile robot with side driving performance degradation, It is possible to overcome the disadvantages such as an increase in the time required for the unnecessary driving. The all - direction spherical wheel drive module for driving a ball - balancing robot is required to develop a power transfer mechanism and a driving algorithm for driving the robot in all directions using three rotor casters. 3DoF (Axis) A driver with built-in forward motion algorithm is embedded in the module and a driving motor module with 3DoF (axis) for driving direction and speed is installed. The movement mechanism depends on the sum of the rotation vectors of the respective driving wheels. It is possible to create various movement directions depending on the rotation and the vector sum of two or three drive wheels. It is possible to move in different directions according to the rotation vector field of each driving wheel. When a more innovative all-round spherical wheel drive module for forward movement is developed, it can be used in the driving part of the mobile robot to improve the performance of the robot more technically, and through the forward-direction robot platform with the drive module Conventional wheeled robots can overcome the disadvantage that the continuous straightening performance is lowered due to resistance to various environments. Therefore, it is necessary to use a full-direction driving function as well as a cleaning robot and a mobile robot applicable in the Americas and Europe It will be an essential technology for guide robots, boarding robots, mobile means, etc., and will contribute to the expansion of the intelligent service robot market and future automobile market.

• Food Science and Preservation
• /
• v.18 no.4
• /
• pp.604-611
• /
• 2011

Several wild yeasts were isolated from Korean grape varieties before and during spontaneous fermentation. Among them, four strains were isolated based on the alcohol content and flavor production in wine after fermentation of apple juice. In this study, the four yeast strains were identified and characterized. PCR-restriction fragment length polymorphism analysis of ITS I-5.8S-ITS II region with restriction endonuclease Hae III and Hinf I resulted in that all the strains showed a typical pattern of Saccharomyces cerevisiae. Pulse field gel electrophoresis showed three different chromosome patterns with a same band between strains SS89 and SS812. When ITS I-5.8S-ITS II sequences of the four strains were compared with one another, they were similar to those of Saccharomyces cerevisiae CBS 4054 type strain. Identity of the sequences was higher than 97% with those of the type strain. Phylogenetic analysis showed based on the sequences showed they were genetically closed to the type strain. The four identified strains were tested in a medium containing 200 ppm potassium metabisulfite, and the MM10 and WW108 inhibition rates resulted at up to 24 h. The four strains were tested at an incubation temperature of $30^{\circ}C$. The 30% sugar concentration in the medium (w/v) showed the highest growth in 36 h, especially in the case of SS89, which was close to growth 40. The four strains were tested in an 8% ethanol medium (v/v). Alcohol tolerance was initially kept in the incubation process. The strains began to adapt, however, to the exceeded resistance. The four strains showed the lowest inhibition rate at 24 h.

• Korean Journal of Plant Resources
• /
• v.30 no.4
• /
• pp.475-480
• /
• 2017

A new Gomchwi cultivar 'Damogy ' was bred by crossing between Gomchwi (Ligularia fischeri (Ledeb.) Turcz.) and Handaeri-gomchwi (Ligularia fischeri var. spiciformis Nakai). The selection and investigation of growth and yield characteristics were conducted from 2006 to 2011 in field and greenhouse of Highland Agriculture Research Institute, NICS, Rural Development Administration, Korea. On a newly developed cultivar 'Damogy', Color of petiole ear was purple, petiole trichome was exist, light of leaf back was not exist, and density of leaf vein was degree 4. Plant height, leaf length, leaf width and petiole length were 45.9, 16.9, 21.1 and 29.0 cm, respectively in the $3^{rd}$ year in growth characteristics. Plant size was also higher than that of Gondalbi. Bolting and flowering time were Aug. $23^{th}$ and Sept. $10^{th}$, respectively. In contrast, Gondalbi showed quite earlier bolting time more than 38 days compared with 'Damogy' and consequently earlier flowering time more than 26 day. 'Damogy' showed similar leaf number (129) per plant compared to 'Gondalbi' (130). Furthermore, yield was higher 'Damogy' (1,889 g/plant) than in 'Gondalbi' (798 g/plant). 'Damogy' showed higher leaf thickness (0.71 mm) than 'Gonalbi' (0.46 mm), and consequently showed more hardness in leaf characteristics ($28.3kg/cm^2$) compared with 'Gondalbi' ($23.0kg/cm^2$). 'Damogy' showed higher resistance in the susceptibility of powdery mildew disease compared to 'Gondalbi'. 'Damogy' variety was registered plant variety protection right as a No. 89 on December 2015.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.3
• /
• pp.193-202
• /
• 2012

'Joseong', a winter forage triticale cultivar (X Triticosecale Wittmack), was developed by the breeding team at the Department of Rice and Winter Cereal Crop, NICS, RDA in 2010. The cultivar 'Joseong' was selected from the cross FAHAD_5/RHINO1R.1D 5+10 5D'5B'//FAHAD_5 by CIMMYT (Mexico) in 1992. Subsequent generations were handled in pedigree selection program at Mexico from 1993 to 1998, and a line 'CTSS92Y-A-4Y-0M-5Y-0B' was selected for earliness and good agronomic characteristics. After preliminary and advance yield test in Korea for 2 years, the line designated as a line name of 'Iksan26'. The 'Iksan26' was subsequently evaluated for earliness and forage yield in 7 different locations such as Jeju, Iksan, Cheongwon, Yesan, Naju, Daegu, and Jinju from 2008 to 2010 and finally named as 'Joseong'. The cultivar 'Joseong' has characteristics of dark green leaf, yellow culm and spike, and large grain of yellowish brown color. The heading date of cultivar 'Joseong' was April 24, which was 5 days earlier than that of check cultivar 'Shinyoung'. It showed better tolerance or resistance to lodging, wet injury, powdery mildew, and leaf rust than those of the check cultivar 'Shinyoung'. The average forage dry matter yield of cultivar 'Joseong' at milk-ripe stage was 14.5 MT $ha^{-1}$, which was lower than 16.5 MT $ha^{-1}$ of the check cultivar 'Shinyoung'. The silage quality of 'Joseong' (5.3%) was lower to the check cultivar 'Shinyoung' (6.0%) in crude protein content, while was 2.1% superior to the check cultivar 'Shinyoung' (61.9%) in TDN (total digestible nutrients). It showed 5.1 MT $ha^{-1}$ of grain yield, which was 40% higher than that of the check cultivar 'Shinyoung' (3.65 MT $ha^{-1}$). This cultivar is recommended for fall sowing crop in the area where daily minimum mean temperatures are averaged higher than $-10^{\circ}C$ in January, and as a winter crop using whole crop forage before planting rice in around Korea.