• The Journal of Korean Society for Radiation Therapy
• /
• v.27 no.1
• /
• pp.1-11
• /
• 2015

Purpose : Evaluating absorbed dose related to 2D and 3D imaging confirmation devices Materials and Methods : According to the radiographic projection conditions, absorbed doses are measured that 3 glass dosimeters attached to the centers of 0', 90', 180' and 270' in the head, thorax and abdomen each with Rando phantom are used in field size $26.6{\times}20$, $15{\times}15$. In the same way, absorbed doses are measured for width 16cm and 10cm of CBCT each. OBI(version 1.5) system and calibrated glass dosimeters are used for the measurement. Results : AP projection for 2D imaging check, In $0^{\circ}$ degree absorbed doses measured in the head were $1.44{\pm}0.26mGy$ with the field size $26.6{\times}20$, $1.17{\pm}0.02mGy$ with the field size $15{\times}15$. With the same method, absorbed doses in the thorax were $3.08{\pm}0.86mGy$ to $0.57{\pm}0.02mGy$ by reducing field size. In the abdomen, absorbed dose were reduced $8.19{\pm}0.54mGy$ to $4.19{\pm}0.09mGy$. Finally according to the field size, absorbed doses has decreased by average 5~12%. With Lateral projection, absorbed doses showed average 5~8% decrease. CBCT for 3D imaging check, CBDI in the head were $4.39{\pm}0.11mGy$ to $3.99{\pm}0.13mGy$ by reducing the width 16cm to 10cm. In the same way in thorax the absorbed dose were reduced $34.88{\pm}0.93(10.48{\pm}0.09)mGy$ to $31.01{\pm}0.3(9.30{\pm}0.09)mGy$ and $35.99{\pm}1.86mGy$ to $32.27{\pm}1.35mGy$ in the abdomen. With variation of width 16cm and 10cm, they showed 8~11% decrease. Conclusion : By means of reducing 2D field size, absorbed dose were decreased average 5~12% in 3D width size 8~11%. So that it is necessary for radiation therapists to recognize systematical management for absorbed dose for Imaging confirmation. and also for frequent CBCT, it is considered whether or not prescribed dose for RT refer to imaging dose.

• Journal of Digital Convergence
• /
• v.11 no.12
• /
• pp.345-352
• /
• 2013

In this paper, a depth estimate method is proposed using GPU(Graphics Processing Unit) in monocular image. a monocular image is a 2D image with missing 3D depth information due to the camera projection and we used a monocular cue to recover the lost depth information by the projection present. The proposed algorithm uses an energy function which takes a variety of cues to create a more generalized and reliable depth map. But, a processing time is late because energy function is defined from the various monocular cues. Therefore, we propose a depth estimate method using GPGPU(General Purpose Graphics Processing Unit). The objective effectiveness of the algorithm is shown using PSNR(Peak Signal to Noise Ratio), a processing time is decrease by 61.22%.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.11a
• /
• pp.616-621
• /
• 2006

Recently, the researches based on vision about user attention and action awareness are being pushed actively for human computer interaction. Among them, various applications of tabletop display system are developed more in accordance with touch sensing technique, co-located and collaborative work. Formerly, although supported only one user, support multi-user at present. Therefore, collaborative work and interaction of four elements (human, computer, displayed objects, physical objects) that is ultimate goal of tabletop display are realizable. Generally, tabletop display system designs according to four key aspects. 1)multi-touch interaction using bare hands. 2)implementation of collaborative work, simultaneous user interaction. 3)direct touch interaction. 4)use of physical objects as an interaction tool. In this paper, we describe a critical analysis of the state-of-the-art in advanced multi-touch sensing techniques for tabletop display system according to the four methods: vision based method, non-vision based method, top-down projection system and rear projection system. And we also discuss some problems and practical applications in the research field.

• The Journal of the Korea Contents Association
• /
• v.7 no.2
• /
• pp.84-91
• /
• 2007

Recently, the researches based on vision about user attention and action awareness are being pushed actively for human computer interaction. Among them, various applications of tabletop display system are developed more in accordance with touch sensing technique, co-located and collaborative work. Formerly, although supported only one user, support multi-user at present. Therefore, collaborative work and interaction of four elements (human, computer, displayed objects, physical objects) that is ultimate goal of tabletop display are realizable. Generally, tabletop display system designs according to four key aspects. 1)multi-touch interaction using bare hands. 2)implementation of collaborative work, simultaneous user interaction. 3)direct touch interaction. 4)use of physical objects as an interaction tool. In this paper, we describe a critical analysis of the state-of-the-art in advanced multi-touch sensing techniques for tabletop display system according to the four methods: vision based method, non-vision based method, top-down projection system and rear projection system. And we also discuss some problems and practical applications in the research field.

• Journal of Korean Academy of Nursing
• /
• v.32 no.4
• /
• pp.447-458
• /
• 2002

The primary purpose of this study is to provide a useful insight for developing effective teaching and student counseling methods by understanding the relationship between four preference patterns of MBTI personality types and EWHA defense mechanisms of nursing college students. Method: The data used in this research were collected administrating EWHA defense mechanism test and MBTI personality type instrument to 195 nursing students in the period of November 3 through September 16 in 2000. Collected data were analysed by pc-SPSS 10.0. Result: Three general conclusions were drawn from the study results: (1) in terms of personality type, 'Extraversion', 'Sensing', 'Thinking', and 'Judgement' types showed high frequency respectively; (2) in terms of defense mechanism, 'Identification' showed the highest score, and then 'suppression' scored next followed by 'Humor'. However, 'Acting out' showed the lowest average score, and then 'Projection' followed by 'Denial'; (3) Based on the relationship between defense mechanism and four MBTI preference patterns, it can be drawn that students with the preference of 'Extraversion' usually use defense mechanism of 'Altruism', 'Sublimation', 'Distortion', 'Controlling', and 'Humor'. In comparison, students with the preference of 'Introversion' often use the defence mechanism of 'Evasion' and 'Projection'. Conclusion: The study results can be utilized in both fields of education and counseling: (1) in the field of education, this study can provide a basis for developing a suitable teaching method for each personality types of nursing students; (2) for counseling practitioners, the results of this study provide the useful insights to understand nursing college students' communication skills, behavior patterns, and ability of coping with problems in the process of counseling.

• Journal of the Korean Society of Radiology
• /
• v.13 no.1
• /
• pp.111-118
• /
• 2019

Chest digital tomosynthesis has become a practical imaging modality because it can solve the problem of anatomy overlapping in conventional chest radiography. However, because of both limited scan angle and finite-size detector, a portion of chest cannot be represented in some or all of the projection. These bring a discontinuity in intensity across the field of view boundaries in the reconstructed slices, which we refer to as the truncation artifacts. The purpose of this study was to reduce truncation artifacts using a weighted normalization approach and to investigate the performance of this approach for our prototype chest digital tomosynthesis system. The system source-to-image distance was 1100 mm, and the center of rotation of X-ray source was located on 100 mm above the detector surface. After obtaining 41 projection views with ${\pm}20^{\circ}$ degrees, tomosynthesis slices were reconstructed with the filtered back projection algorithm. For quantitative evaluation, peak signal to noise ratio and structure similarity index values were evaluated after reconstructing reference image using simulation, and mean value of specific direction values was evaluated using real data. Simulation results showed that the peak signal to noise ratio and structure similarity index was improved respectively. In the case of the experimental results showed that the effect of artifact in the mean value of specific direction of the reconstructed image was reduced. In conclusion, the weighted normalization method improves the quality of image by reducing truncation artifacts. These results suggested that weighted normalization method could improve the image quality of chest digital tomosynthesis.

• International Journal of Precision Engineering and Manufacturing
• /
• v.3 no.3
• /
• pp.37-43
• /
• 2002

Electronic speckle contouring(ESC) based on electronic speckle pattern interferometry is the optical method for measuring object shape by using fringe-projection techniques. This method has the advantages of being non-contact, non-destructive and a whole-field measurement of the surface under investigation. Fringes in ESC represent the difference in depth along the view direction between the master wavefront and the test component. The contour maps of three-dimensional diffuse objects can be obtained by small shifts of optical fiber carrying the dual-object-beams and 4-frame phase shifting. In this study we proposed the contouring method by shifting the collimated illumination beams through optical fiber in order to obtain the contour fringe patterns. And also, we performed the addition of incremental images through the geometrical analysis to obtain the contour fringe interval when we performed the incremental addition of images and experiments based on this method. We obtained both quantitative increment without decorrelation effect and qualitative improvement by reducing the noise of contour fringes.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.3
• /
• pp.1243-1263
• /
• 2018

The two-stage linear discrimination analysis (TSLDA) is a feature extraction technique to solve the small size sample problem in the field of image recognition. The TSLDA has retained all subspace information of the between-class scatter and within-class scatter. However, the feature information in the four subspaces may not be entirely beneficial for classification, and the regularization procedure for eliminating singular metrics in TSLDA has higher time complexity. In order to address these drawbacks, this paper proposes an improved two-stage linear discriminant analysis (Improved TSLDA). The Improved TSLDA proposes a selection and compression method to extract superior feature information from the four subspaces to constitute optimal projection space, where it defines a single Fisher criterion to measure the importance of single feature vector. Meanwhile, Improved TSLDA also applies an approximation matrix method to eliminate the singular matrices and reduce its time complexity. This paper presents comparative experiments on five face databases and one handwritten digit database to validate the effectiveness of the Improved TSLDA.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.9
• /
• pp.431-437
• /
• 2001

Since the eddy current problem usually depends on the geometry of the moving conductive sheet and the shape of the pole projection area, there is no general method to find out its analytical solution. The analysis of the eddy current in a rotating disk is performed in the case of time-invariant field to find its analytical solution. As a method to solve the eddy current problem, the concept of the Coulomb charge and image method are proposed with the consideration of the boundary condition. Firstly, the line charge is obtained from the volume charge generated in the rotating disk and Coulomb's law is applied. Secondly, the finite disk radius is considered by introducing an imaginary eddy current to satisfy the boundary condition that the radial component of the eddy current is zero at the edge of the relating disk. Thirdly, the braking torque is calculated by applying Lorentz force law. Finally, the computed braking torque is compared with the measured one As a result, it can be said that the proposed model presents fairly accurate results in a low angular velocity range although a large error is observed as the angular velocity of the disk increases.

• Ocean Systems Engineering
• /
• v.12 no.1
• /
• pp.63-86
• /
• 2022

A refined projection-based purely Lagrangian meshfree method is presented towards reliable numerical analysis of fluid flow interactions with saturated/unsaturated porous media of uniform/spatially-varying porosities. The governing equations are reformulated on the basis of two-phase mixture theory with incorporation of volume fraction. These principal equations of mixture are discretized in the context of Incompressible SPH (Smoothed Particle Hydrodynamics) method. Associated with the consideration of governing equations of mixture, a new term arises in the source term of PPE (Poisson Pressure Equation), resulting in modified source term. The linear and nonlinear force terms are included in momentum equation to represent the resistance from porous media. Volume increase of fluid particles are taken into consideration on account of the presence of porous media, and hence multi-resolution ISPH framework is also incorporated. The stability and accuracy of the proposed method are thoroughly examined by reproducing several numerical examples including the interactions between fluid flow and saturated/unsaturated porous media of uniform/spatially-varying porosities. The method shows continuous pressure field, smooth variations of particle volumes and regular distributions of particles at the interface between fluid and porous media.