• 한국자원식물학회지
• /
• 제27권6호
• /
• pp.701-706
• /
• 2014

Three highbush blueberries (Vaccinium corymbosum cvs. Bluecrop, Coville, and Northland) grown in an open field and in a rain shelter were compared to evaluate the potential benefits of rain-sheltering systems on growth and fruit quality. Shrubs grown in rain shelter flowered 5-14 days earlier and were in full bloom earlier than those in the open field. All three cultivars set fruit by nearly 90% of flowers when they were grown in the open field, but was markedly reduced when they were grown in the rain shelter, to approximately 50% for 'Bluecrop' and 'Coville'. Fruit sets ratio of 'Northland' grown in the in the rain shelter was 14.5. Fruit from greenhouse-grown 'Northland' were larger, heavier, and had more seeds per berry. Soluble sugar content (SSC) of fruits varied both with the cultivars and growing conditions. SSC of fruits grown in the greenhouse was higher in 'Bluecrop' compared to that grown in the field, but this pattern was reversed in 'Northland'. Titratable acid was significantly higher in fruits from rain shelter-grown shrubs of both 'Bluecrop' and 'Northland' than in fruits from open field-grown shrubs (P < 0.05), although there was no difference in TA with respect to growing conditions for 'Coville'. The number of seed per fruit, fruit length and diameter, weight, SSC, and TA were similar in 'Coville' shrubs grown in the open field and the rain shelter. Fruit firmness of 'Bluecrop', 'Coville', and 'Northland' was higher in the rain shelter than in the open field. 'Coville' and 'Northland' fruits harvested in the open field had higher blue chroma than those harvested in the rain shelter. However, this pattern was reversed for 'Bluecrop'. On the whole, sheltering from rain affected most fruit characteristics of the three cultivars differently. Therefore, suitable blueberry cultivars for the rain shelter should be chosen by purpose.

• 한국재료학회지
• /
• 제23권1호
• /
• pp.13-17
• /
• 2013

The alignments of polystyrene particles of $1{\mu}m$ and $5{\mu}m$ sizes in an aqueous colloidal system were observed by varying the electric field strength, the frequency and the water flow. Spherical mono-dispersed polystyrene particles dispersed in pure water were put into a perfusion chamber; an AC electric field was applied to the Au/Cr electrodes with a 4 mm gap on the glass substrate. The mixture of the $1{\mu}m$ and $5{\mu}m$ sized polystyrene particles at 0.5 vol% concentrations for each size was set in the dielectrophoresis conditions of 1 kHz and 150 V/cm. Large particles of $5{\mu}m$ size were aligned to form chains as the result of the dielectrophoresis force interaction. On the contrary, small particles of $1{\mu}m$ size did not form chains because the dielectrophoresis force was not sufficiently large. When the electric field increased to 250 V/cm, small particles were able to form chains. After the chains were formed from both large and small particles, they began to coalescence as time passed. Owing to the electroosmotic flow of water, wave patterns along the perpendicular direction of the applied electric field appeared at the conditions of 200 Hz and 50 V/cm, when the dielectrophoresis force was small. This wave pattern also appeared for small particles at 1 kHz and 150 V/cm conditions due to the flow of solvent when water was forced to circulate.

• 한국산학기술학회논문지
• /
• 제15권2호
• /
• pp.1089-1095
• /
• 2014

본 연구에서는 도심지 지하굴착시 많이 시행하고 있는 역해석기법에 의하여 최종변위를 예측하고 계측자료와 비교 분석함으로써. 굴착도중 역해석 기법의 효율성을 극대화 시키고, 동일한 조건의 현장에서 경제적이고 효과적인 시공관리가 이루어 질 수 있도록 하고자 한다. 첫 번째 단계로 역해석 기법을 적용한 현장을 사례로 제시하고 시공과 계측이 완료된 3군데의 다른 현장에 역해석 기법을 적용하였다. 두 곳 현장에서는 만족할 만한 결과를 도출하였으나 한 군데 현장에서는 해석치와 계측치와의 많은 차이를 보였다. 분석결과는, 역해석 조건과 굴착시공조건을 최대한 일치시켜야 하고, 지하연속벽이 강성의 연속벽체라 할지라도 RANKINE 토압조건과 상이하게 굴착하부의 변위가 크게 발생되는 조건에서는 토압의 전이현상으로 토압의 균등화가 이루어지기 때문에 삼각형 형태의 RANKINE 토압 적용성에 대한 신중한 제고가 필요하다. 그리고 토질정수 재산정시 풍화대의 점착력과 지하수위의 경험적 고려가 필요한 것으로 판단된다.

• The Korean Journal of Ecology
• /
• 제19권5호
• /
• pp.453-463
• /
• 1996

Diurnal changes of microclimatic conditions and tissue water relations were measured at two sites where Carpinus laxiflora and C. cordata were allopatrically distributed. The microclimatic conditions at a site where C. laxiflora was distributed produced severe water stress condition during summer months. Daily maximum temperature reached $30.4^\circC$ and the highest vapor pressure deficit was 1.31 KPa when 13 rainless days were continued. During this period soil water content decreased to below the field capacity even at a depth of 20 cm and xylem pressure potential also decreased to ­2.04 MPa. However, turgor potential was maintained more than 0.4 MPa. Patterns of stomatal conductance were changed with evaporative demand and soil water availability. On the other hand, microclimatic conditions at a site where C. cordata was distributed were moderate water strees condition compared with those at a site C. laxiflora was distributed. Though soil water content was maintained above field capacity C. cordata showed a remarkable decrease in turgor potential and stomatal conductance throughout the experiment. These results indicate that there is a difference in habitat characteristics between the two species and C. laxiflora is more resistant than C. cordata to water stress.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권9호
• /
• pp.1314-1317
• /
• 2011

To evaluate the effects of pulsed electric field (PEF) application on scalder and chiller water on Campylobacter contamination, four different treatments under three different water conditions including hard scalder water ($55^{\circ}C$), soft scalder water ($45^{\circ}C$) and chiller water, were applied as follows: i) a control treatment with no salt and no electric treatment, ii) a PEF only treatment, iii) a PEF treatment with 0.5% salt water, and iv) a PEF treatment with 1% salt water treatment. The use of PEF in hard scalding water showed an effect of reducing Campylobacter when compared to the control during the 200 s timeframe. With the addition of salt, the intervention caused at least 5.81 log CFU/ml reduction of Campylobacter counts after 200 s of PEF exposure. Similar effects were observed under soft scalding conditions. Campylobacter reductions were evident under chilling conditions with up to 2.00 log for PEF only, 5.77 log for PEF+0.5% salt and 2.69 log for PEF+1% salt treatment in water. Therefore, the current PEF setting for the scalder and chiller water can be successfully used to reduce pathogenic loads of Campylobacter on broiler chicken carcasses, and further research may be necessary to apply it in the poultry processing industry.

• 한국재난정보학회 논문집
• /
• 제10권1호
• /
• pp.25-32
• /
• 2014

재료시험의 주 목적은 작용되는 하중과 기후조건을 포함하여 현장조건과 가급적으로 유사한 조건하에서 모사하는 것이다. 또한 시험법은 쉽고 저렴하며 시험을 수행하기 간단하며 시험결과가 효율적 이어서 많은 기관에서 표준시험법으로 수용할 수 있어야한다. 본 연구에서는 이러한 내용에 근거하여 새로운 시험법인 구속응력을 가진 반복 축 하중시험이 아스팔트 콘크리트 혼합물의 소성변형 시험으로 개발되었다. 본 연구에서 제시하는 소성변형 시험은 다양한 구조해석과 현장 데이터의 분석을 근거로 개발되었다. 본 아스팔트 콘크리트의 소성변형 시험법에서는 포장의 깊이에 따라 3가지 범주로 분류 하였다. 각 범주마다 다른 온도와 수직응력을 적용하여 시험을 수행하였다.

• 대한기계학회논문집A
• /
• 제20권8호
• /
• pp.2468-2479
• /
• 1996

An upper bound solution is obtained to perform the process analysis of hot strip rolling process. The material flows within the roll bite at various geometries and frictional conditions are obtained from finite element analysis and the typical flow pattern which is necessary to determine the kinematically admissible velocity field is assumed. From the kinematically admissible velocity field, the upper bound energy is calculated and the rolling load, angle of neutral point and forward slip ratio at various operational conditions are obtained from upper bound energy. The process analysis of above mentioned parameters at various operational conditions have provided valuable information which is hard to obtain during rolling operation and the predicted ranges of quantitive values from these analyses lie whthin the bound of actual operational data.

• 한국산업융합학회 논문집
• /
• 제7권3호
• /
• pp.241-248
• /
• 2004

The purpose of the this paper is to consider the many dangerous factors involved in the use of temporary equipments in construction work and to reduce potential numerous fatalities by presenting suitable countermeasures. As a result of this study, the following conclusions and recommendations have been suggested. 1 Measures for safety sanitation must be strengthened in the field of machinery installation and engineering method. 2 The synthetic safety sanitation and safety control should be positively propelled. 3 An efficient safety training and education must be emphasized by the scientifical and systematical devices 4 A powerful precautionary countermeasure against health impediment should be conducted substantially 5. Miscellenous actions should be taken as follow. - Awaken enterprisers to the importance of their responsibility - Continuously conducting safety check.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.114-117
• /
• 2001

A higher order zig-zag plate theory is developed to refine accurately predict fully coupled of the mechanical, thermal, and electric behaviors. Both the displacement and temperature fields through the thickness are constructed by superimposing linear zig-zag field to the smooth globally cubic varying field. Smooth parabolic distribution through the thickness is assumed in the transverse deflection in order to consider transverse normal deformation. Linear zig-zag form is adopted in the electric field. The layer-dependent degrees of freedom of displacement and temperature fields are expressed in terms of reference primary degrees of freedom by applying interface continuity conditions as well as bounding surface conditions of transverse shear stresses and transverse heat flux The numerical examples of coupled and uncoupled analysis are demonstrated the accuracy and efficiency of the present theory. The present theory is suitable for the predictions of fully coupled behaviors of thick smart composite plate under mechanical, thermal, and electric loadings.

• 한국기계가공학회지
• /
• 제15권3호
• /
• pp.58-65
• /
• 2016

This study analyzed the structural weld strength for a door hinge for a field artillery ammunition support vehicle. In order to determine the optimal conditions, we measured the modal analysis and analyzed the leg length of a rear door hinge. From these methods, we acquired the vibration frequency of normal mode and the optimal welding leg length conditions. It was possible to obtain a structural stability for a rear door hinge of the field artillery ammunition support vehicle. In the future, this should be used as a reference source for the weld strength analysis of high vibration and high weight structures for another welding system design.