• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.57-60
• /
• 2003

Generally, normal concrete has the disadvantages of low tensile strength, low ductility and volume instability. To improve its performance, fiber reinforced cimentitious composite(FRCC) have been development. These composites are composed of cement, sand, water, a small amount of admixtures, and an optimal amount of fiber like synthetic fiber and steel fiber. This research investigates influence of sand, hybrid fiber and fiber volume fraction, and reports the test results of mechanical properties, fracture behavior and failure pattern of the FRCC. Our experiment was observed that sand mixed FRCC has lower compressive strength and higher bending strength than no sand mixed FRCC, and more steel fiber mixed FRCC has higher compressive strength and bending strength. Hybrid FRCC of steel and polypropylene had superior properties than FRCC of polypropylene only in same fiber volume fraction.

• Fibers and Polymers
• /
• 제7권3호
• /
• pp.235-240
• /
• 2006

Polyacrylonitrile (PAN) fiber was grafted with casein after alkaline hydrolysis and chlorination reactions of the original fiber. The structures and morphologies of the casein grafted fiber were characterized by Fourier transform infrared spectroscopy (FTIR), X-Ray diffraction (XRD), and scanning electron microscope (SEM). Moisture absorption, specific electric resistance, water retention value, and mechanical properties were also investigated. The results showed that casein was grafted onto the surface of the PAN fiber and the grafted PAN fiber presented better hygroscopicity compared with the untreated fiber. With proper tensile strength, the modified fiber could still meet the requirement for wearing. A mechanism was proposed to explain the deposit of casein on the synthetic acrylic fiber.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.21-22
• /
• 2013

Nowadays, the fiber which mixed with concrete matrix always has low adhesion with cement paste. It's difficult to use fiber to reinforce the structure. For more adding fiber in concrete would cause some problems as the low flowability and surface polishing. Further study is needed in fiber using. In this research, further study in fiber reinforced concrete has been invested. Various fibers with different properties have been used to prevent cracking. Fiber reinforced concrete's fundamental properties as slump, air content, compressive strength and tensile strength have been tested. Optimum type of the fiber and optimum addition ratio of fiber has been invested to increase the utility of the fiber which used in concrete.

• 대한토목학회논문집
• /
• 제39권6호
• /
• pp.675-689
• /
• 2019

자가응력 및 자가손상 감지능력을 모두 가지는 스마트 콘크리트의 개발은 아직까지 손상 감지 능력에 대한 원인 규명이 명확하지 않아 어려운 현실이다. 따라서, 본 연구에서는 매트릭스 강도, 섬유 형식 및 보강량이 강섬유 보강 시멘트 복합재료의 인발시 전기저항에 미치는 영향을 평가하였다. 실험으로부터 섬유와 매트릭스 사이 계면에서의 탈착으로 전기저항률이 감소한다는 사실을 알 수 있었다. 섬유와 매트릭스 사이 계면 부착강도가 높을수록 더 큰 전기저항률의 감소를 유발하였다. 따라서, 고강도 매트릭스, 황동 도금된 강섬유 그리고 변형된 강섬유를 사용시 높은 계면부착강도를 유발하고 그 결과 더 큰 전기저항률 감소를 유발하였다.

• 대한의생명과학회지
• /
• 제13권1호
• /
• pp.55-60
• /
• 2007

Computerized image processing and analysis system was used for quantitative assessment of skin tissue components in color histological sections. The purpose of this study was to determine that the changes in the collagen fiber density and elastic fiber density in dermis in the rat skin as aging. And also to determine that the correlation between fibroblast density and collagen fiber density and elastic fiber density in the aged rat skin. Ten weeks old ($130{\sim}150g$) eight and fifty-four weeks old ($300{\sim}350g$) eight female Sprague-Dawley rats were used. The full-thickness skin biopsy specimens were prepared serial sections and stained with hematoxylin and eosin, Masson's trichrome and Verhoeff-van Gieson. The collagen fiber and the elastic fiber were identified using the image analysis processing system and then calculated the collagen fiber density rate and the elastic fiber density rate in the dermis. It also identified fibroblast and calculated fibroblast density in the dermis. By using a Student's t-test, a decrease in the collagen fiber density rate (t=-4.650, P<0.001) and the elastic fiber density rate (t=-6.494, P<0.001) of dermis can be observed in aged rats as compared with the young rats. A Student's t-test showed a significantly less fibroblast density in the aged rats than the young rats (t=-4.497, P<0.001). There were significantly positive correlation between the fibroblast density and the collagen fiber density rate (r=.69, P<0.001) and the elastic fiber density rate (r=.91, P<0.001). These results indicate that the aging may decrease the collagen fiber density and elastic fiber density due to reduced the proliferative and synthetic activity of fibroblast in the dermis.

• 대한토목학회논문집
• /
• 제31권3A호
• /
• pp.251-260
• /
• 2011

본 연구는 천연마섬유보강 시멘트 경화체와 폴리올레핀계 매크로섬유의 부착강도, 계면인성, 미세구조 분석을 포함한 부착 특성에 미치는 천연마섬유의 효과를 제시하였다. 다양한 조건에서의 폴리올레핀계 매크로섬유 인발시험의 실험적 결과를 보고하였다. 천연마섬유의 혼입률은 0.1%에서 0.2%까지를 배합설계에 적용하였다. 부착시험은 천연마섬유보강 시멘트 경화체에서 폴리올레핀계 매크로섬유의 부착특성을 측정하기 위하여 실시하였다. 시험결과 천연마섬유의 혼입은 폴리올레핀계 매크로섬유와 시멘트 경화체의 계면강화에 효과적이었다. 폴리올레핀계 매크로섬유와 천연마섬유보강 시멘트 경화체의 부착강도 및 계면인성은 섬유의 혼입률이 증가할수록 증가하였다. 미세구조분석은 섬유의 인발시험결과로부터 획득한 부착 메커니즘을 확인할 수 있었다.

• 한국건설순환자원학회논문집
• /
• 제4권4호
• /
• pp.470-476
• /
• 2016

Many studies have been performed on hybrid fiber reinforced concrete for years, which is to improve some of the weak material properties of concrete. Studies on characteristics of hybrid fiber reinforced concrete using amorphous steel fiber and polyamide fiber, however, yet remain to be done. The purpose of this experimental research is to evaluate the workability and mechanical properties of hybrid fiber reinforced concrete using amorphous steel fiber and polyamide fiber. For this purpose, the hybrid fiber reinforced concrete containing amorphous steel fiber(ASF) and polyamide fiber(PAF) were made according to their total volume fraction of 0.5 % for water-binder ratio of 33 %, and then the mechanical properties such as the compressive strength, direct tensile strength, flexural strength, and flexural toughness of those were estimated. It was observed from the test results that the compressive strength was slightly decreased with increasing ASF and decreasing PAF and the effect of fiber combination on the flexural strength was not much but the flexural toughness was relatively largely increased with decreasing ASF and increasing PAF.

• Advances in concrete construction
• /
• 제16권3호
• /
• pp.127-139
• /
• 2023

In this study, the steel fiber and the polypropylene fiber were used to enhance the mechanical properties of fully recycled coarse aggregate concrete. Natural crushed stone was replaced with recycled coarse aggregate at 100% by volume. The steel fiber and polypropylene fiber were used as additive material by incorporating into the mixture. In this test two parameters were considered: (a) steel fiber volume ratio (i.e., 0%, 1%, 1.5%, 2%), (b) polypropylene fiber volume ratio (i.e., 0%, 0.1%, 0.15%, 0.2%). The results showed that compared with no fiber, the integrity of cubes or cylinders mixed with fibers after failure was better. When the volume ratio of steel fiber was 1~2%, the width of mid-span crack after flexural failure was 5~8 mm. In addition, when the volume ratio of polypropylene fiber was 0.15%, with the increase of steel fiber content, the static elastic modulus and toughness of axial compression first increased and then decreased, and the flexural strength increased, with a range of 6.5%~20.3%. Besides, when the volume ratio of steel fiber was 1.5%, with the increase of polypropylene fiber content, the static elastic modulus decreased, with a range of 7.0%~10.5%. The ratio of axial compression toughness first increased and then decreased, with a range of 2.2%~8.7%. The flexural strength decreased, with a range of 2.7%~12.6%. On the other hand, the calculation formula of static elastic modulus and cube compressive strength of fully recycled coarse aggregate with steel-polypropylene fiber was fitted, and the optimal fiber content within the scope of the test were put forward.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.632-635
• /
• 2004

In this paper, material property of fiber reinforced concrete(FRC) according to the steel fiber, glass fiber and carbon fiber blended ratio. The fiber reinforced concretes are increased mechanical strength, because the fibers are dispersed with randomly direction and disturb crack progression in concretes. Adhesive fracture is occurred slowly at interface between fiber and concrete, and the fracture energy is absorbed due to softening phenomenon.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.582-587
• /
• 1999

This study has been done to investigate the characteristics of synthetic fiber reinforcement sol with fully satruated . To this end, consolidated undrained triaxial test was performed on synthetic fiber reinforcement soil using the soft clay and plypropylene fiber . From the results of test, it was formed that the mixing ratio for weight and the aspect ratio of synthetic fiber have an effect on the shear characteristic of synthetic fiber rinforcement soil. Especially shear paramter C has line relationship for mixing ratio of fiber, and øhas parabolic relationship for mixing ratio of fiber.