• International Journal of Aeronautical and Space Sciences
• /
• 제13권2호
• /
• pp.221-228
• /
• 2012

An active compensation method for the deformation of composite structures using additional controllable metal parts is proposed, and its feasibility is experimentally investigated in a simulated space environment. Composite specimens are tested in a vacuum chamber, which is able to maintain pressure on the order of 10-3 torr and interior temperature in the range of ${\pm}30^{\circ}C$. The displacement-measuring interferometer system, which consists of a heterodyne HeNe laser and an interferometer, is used to measure the displacement of the whole structure. Meanwhile, the strain of the composite part and temperature of both parts are measured by fiber Bragg grating sensors and thermistors, respectively. The displacement of the composite structure is maintained within a tolerance of ${\pm}1{\mu}m$ by controlling the elongation of the metal part, which is bonded to the end of the composite part. Also, the possibility of fiber Bragg grating sensors as control input sensors is successfully demonstrated using a proper corrective factor based on the specimen temperature gradient data.

• 한국생산제조학회지
• /
• 제23권2호
• /
• pp.199-205
• /
• 2014

This research focuses on the development of an interrogator that operates and measures fiber Bragg grating(FBG) multiplexing sensor probes for accurate-measurement of the blade deflection in a wind power generator. We designed and fabricated an optical source and spectrum module for the interrogator. Additionally, we verified the wavelength repeatability within 0.001 nm and the wavelength stability within 1 pm of the optical source, and we experimentally determined that the wavelength scanning range was about 44.4 nm. The FBG sensor with 2 nm resolution can be extended to a performance-efficient system that measures more than 20 sensors. The implemented interrogator has 0.141 nm wavelength variations corresponding to an ambient temperature range of $0^{\circ}C$ to $70^{\circ}C$. The measurement error can be easily reduced by employing a temperature compensation algorithm. In this study, we quantitatively confirmed the accuracy and operating stability of the interrogator.

• 센서학회지
• /
• 제9권4호
• /
• pp.307-315
• /
• 2000

FBG (Fiber Bragg Grating) hydrophone sensor의 arrays system을 구축하고, 수중에서 넓은 영역에 대한 다중점 신호 검출을 구현하기 위하여, WDM(Wavelength Division Multiplexing) 방법과 passive band-pass filter system을 이용하여, 설계 및 제작된 2개의 FBG transducers의 수중 음향파 신호 검출을 실행하였다. 실험 결과 수중에서 주파수 1.3 KHz대까지 다중점에 대하여, 주파수 신호가 각각 다른신호의 검출이 가능하였다. 따라서, 제작된 FBG transducers을 이용한 hydrophone sensor arrays의 시스템 설계가 가능함을 확인하였다.

• 한국전자파학회논문지
• /
• 제18권12호
• /
• pp.1383-1390
• /
• 2007

본 논문에서는 파이버 브래그 격자 필터로 구성된 전광 다중화기의 온도 특성에 대해 연구하였다. 전광 다중화기의 온도 특성을 분석하기 위해서, 전광 다중화기의 출력단에 대한 온도 응답을 수치 해석하였으며, 실험을 통하여 출력 스펙트럼을 측정하였다. 그 결과로부터 $-30{\sim}90^{\circ}C$ 범위 내에서 전광 다중화기의 출력 스펙트럼의 중심 파장은 약 0.01230 nm/$^{\circ}C$로 변화함을 알 수 있었다.

• 한국광학회지
• /
• 제22권2호
• /
• pp.72-76
• /
• 2011

반도체 광 증폭기와 파브리-페롯 가변 필터를 이용한 파장 훑음 레이저 기반 광 결맞음 단층 촬영을 구성하고, 이로부터 선명한 이미징을 얻기 위한 파수 영역 선형화를 구현하였다. 파수 영역 선형화는 5 개의 서로다른 공진 파장을 가진 광섬유 격자로 이루어진 어레이를 이용하여 보간법으로 수행하였다. 샘플단의 1 mm 깊이에서 파수 영역 선형화를 수행한 후 점 분포 함수(point spread function)로부터 측정한 SNR(signal-to-noise ratio)은 12 dB 향상된 값을 얻어냈다. 또한 파수 영역 선형화 전과 후에 대해 슬라이드 글라스를 이용하여 OCT 이미징을 얻어낸 결과 파수 영역 선형화가 매우 잘 되었음을 확인할 수 있었다.

• Composites Research
• /
• 제17권2호
• /
• pp.28-33
• /
• 2004

광섬유 브래그 격자센서를 이용하여 인장하중을 받는 직교적출 복합해로 법에서 발생하는 파손신호를 계측하였다. 민감도와 주파수 대역성능을 향상시키기 위하여 수동 마흐_젠더 간섭계 방식의 복조기를 제안하였다. 제안한 FBG 센서시스템은 위상변조기와 같은 능동소자가 없기 때문에 구성이 간단하고 쉽게 구현할 수 있으며 충격이나 파손 신호와 같이 작은 진폭의 고주파 진동 측정이 가능하다. FBG 센서로 측정한 복합재료의 파손신호는 복합재료 시편의 90도 층에서 모재 균열이 진전하면서 발생하는 급격한 변형률 변이에 해당하는 초기 오프？ 값과 최대 수백 킬로헤르쯔에 이르는 주파수로 진동하고 었었다.

• 비파괴검사학회지
• /
• 제30권3호
• /
• pp.236-243
• /
• 2010

Fiber Bragg grating(FBG) sensor arrays can be used to monitor the mechanical behavior of the large composite structures such as wind turbine rotor blades and aircrafts. However, brittle FBG sensors, especially multiplexed FBG sensors are easily damaged when they are installed in the flexible structures. As a protection of brittle FBG sensors, epoxy packaged FBG sensors have been presented in this paper. Finite element analysis and experiments were performed to evaluate the effects of adhesives, packaging materials and the bonding layer thickness on the strain transmission. Two types of epoxy were used for packaging FBG sensors and the sensor probes were attached with various bonding layer thickness. It was observed that thin bonding layer with high elastic modulus ratio of the adhesive to packaging provided good strain transmission. However, the strain transmission was significantly decreased when elastic modulus of the adhesive was much lower than the packaged FBG sensor probe's one.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.223-235
• /
• 2021

The Vortex-Induced Vibration (VIV) test system on deepwater riser based on Bare Fiber Bragg Grating (BFBG) sensor technology was designed. Meanwhile, a riser VIV response numerical model was established based on the work-energy principle. The results show that the first-order vibration frequency dominates the vibration of the riser, and as the velocity increases, the dominant frequency of the riser gradually increases under the effect of different top tensions. At the same velocity, as the top tension increases step by step, the dominant frequency and fatigue damage at the same position along the axial length of the riser both gradually decreases. The model test and numerical simulation show a relatively consistent change, maintaining a high degree of agreement. The process control system based on BFBG of model test has excellent performance, and FBG sensors have great advantages in VIV test of a vertical riser in water.

• Current Optics and Photonics
• /
• 제6권2호
• /
• pp.137-142
• /
• 2022

Leak detection is one of the most important challenges in condition monitoring of water pipelines. Fiber Bragg grating (FBG) sensors offer an attractive technique to detect leak signals. In this paper, leak measurements were conducted on a water distribution pilot plant with a length of 270 m and a diameter of 100 mm. FBG sensors were installed on the pipeline surface and used to detect leak vibration signals. The leak was demonstrated with 1-, 2-, 3-, and 4-mm diameter leak holes in four different pipe types. The frequency response of leak signals was analyzed by fast Fourier transform analysis in real time. In the experiment, the frequency range of leak signals was approximately 340-440 Hz. The frequency shifts of leak signals according to the pipe type and the size of the leak hole were demonstrated at a pressure of 1.8 bar and a flow rate of 25.51 m³/h. Results show that frequency shifts detected by FBG sensors can be used to detect leaks in pipelines.

• 한국통신학회논문지
• /
• 제28권8A호
• /
• pp.657-662
• /
• 2003

광성능을 모니터하기 위해 필요한 것이 OPM(optical performance monitoring module)이다. OPM에서 가장 중요한 것은 광 신호의 파장을 측정하는 것이다. 기존에는 pilot tone을 사용하였으므로 파장값을 얻기가 어려웠지만, 그후 AWG(arrayed waveguide grating), AOTF (acousto optic tuneable filter) 등을 사용하여 다채널 신호에 대한 파장과 전송 품질을 모니터하게 되었다. 본 논문에서는 일반적으로 광 분해능이 우수하다고 평가되는 FFP-TF(fiber fabry perot tuneable filter)를 채택하였으며, FFP-TF를 사용하기 때문에 필요한 기준파장의 설정을 위하여 광섬유격자(FBG : fiber bragg grating)를 사용하였다.