• Journal of Electrical Engineering and Technology
• /
• v.4 no.4
• /
• pp.531-537
• /
• 2009

Lightning has a broad frequency spectrum from DC to a few MHz. Consequently, the high frequency performance of grounding systems for protection against lightning should be evaluated, with the distributed parameter circuit model in a uniform soil being used to simulate grounding impedances. This paper proposes a simulation method which applies the distributed parameter circuit model for the frequency-dependent impedance of vertically driven ground rods by considering multi-layered soil structures where ground rods are buried. The Matlab program was used to calculate the frequency-dependent ground impedances for two ground rods of different lengths. As a result, an increase of the length of ground rod is not always followed by a decrease of grounding impedance, at least at a high frequency. The results obtained using the newly proposed simulation method considering multi-layered soil structures are in good agreement with the measured results.

• Membrane Journal
• /
• v.27 no.2
• /
• pp.167-181
• /
• 2017

Graphene-based materials have been considered as a promising membrane material, due to its easy processability and atomic thickness. In this study, we studied on gas permeation behavior in few-layered GO membranes prepared by spin-coating method. The GO membrane structures were varied by using different GO flake sizes and GO solutions at various pH levels. The GO membranes prepared small flake size show more permeable and selective gas separation properties than large one due to shortening tortuosity. Also gas transport behaviors of the GO membranes are sensitive to slit width for gas diffusion because the pore size of GO membranes ranged from molecular sieving to Knudsen diffusion area. In particular, due to the narrow pore size of GO membranes and highly $CO_2$-philic properties of GO nanosheets, few-layered GO membranes exhibit ultrafast and $CO_2$ selective character in comparison with other gas molecules, which lead to outstanding $CO_2$ capture properties such as $CO_2/H_2$, $CO_2/CH_4$, and $CO_2/N_2$. This unusual gas transport through multi-layered GO nanosheets can explain a unique transport mechanism followed by an adsorption-facilitated diffusion behavior (i.e., surface diffusion mechanism). These findings provide the great insights for designing $CO_2$-selective membrane materials and the practical guidelines for gas transports through slit-like pores and lamellar structures.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.39.2-39.2
• /
• 2011

With the steady increase in the demand for flexible devices, mainly in display panels, researchers have focused on finding a novel material that have excellent electrical properties even when it is bended or stretched, along with superior mechanical and thermal properties. Graphene, a single-layered two-dimensional carbon lattice, has recently attracted tremendous research interest in this respect. However, the limitations in the growing method of graphene, mainly chemical vapor deposition on transition metal catalysts, has posed severe problems in terms of device integration, due to the laborious transfer process that may damage and contaminate the graphene layer. In addition, to lower the overall cost, a fabrication technique that supports low temperature and low vacuum is required, which is the main reason why solution-based process for graphene layer deposition has become the hot issue. Nonetheless, a direct deposition method of large area, few-layered, and uniform graphene layers has not been reported yet, along with a convenient method of patterning them. Here, we report an evaporation-induced technique for directly depositing few layers of graphene nanosheets with excellent uniformity and thickness controllability on any substrate. The printed graphene nanosheets can be patterned into desired shapes and structures, which can be directly applicable as flexible and transparent electrode. To illustrate such potential, the transport properties and resistivity of the deposited graphene layers have been investigated according to their thickness. The induced internal flow of the graphene solution during tis evaporation allows uniform deposition with which its thickness, and thus resistivity can be tuned by controlling the composition ratio of the solute and solvent.

• Journal of the Korean Society of Safety
• /
• v.36 no.4
• /
• pp.88-98
• /
• 2021

Korean industry has achieved dramatic growth in a short time through continuous technical innovations. However, safety consciousness and management have not kept pace with industry growth. The characteristics of industrial accidents in socio-technical systems have become so complicated that it has been challenging for safety professionals to implement effective preventive measures because it is difficult to determine what is happening in the complex workplace. Thus far, they have focused on technical improvements and the requirements of OSH regulations to avoid legal responsibility. Accordingly, this study has used the systemic analysis method to explain the emergence of something unexpected in complex and multi-layered business structures, which is usually related to the variabilities of humans and organizations. This study chose a shipyard where a few fatal accidents had occurred because the shipbuilding industry includes numerous variabilities, including obtaining orders, manpower supply, procurement, etc. Systemic analysis progressed using FRAM based on two accident cases related to the truss platform used in LNG vessels. The outcome shows that each function within the system has its variabilities and has become coupled or dependent on other functions, increasing the possibility of accidents. This analysis method can provide OSH professionals with practical techniques for explaining what is happening in a complex socio-technical system and how to take proper measures.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.286-286
• /
• 2016

Hexagonal boron nitride (hBN) is a dielectric insulator with a two-dimensional (2D) layered structure. It is an appealing substrate dielectric for many applications due to its favorable properties, such as a wide band gap energy, chemical inertness and high thermal conductivity[1]. Furthermore, its remarkable mechanical strength renders few-layered hBN a flexible and transparent substrate, ideal for next-generation electronics and optoelectronics in applications. However, the difficulty of preparing high quality large-area hBN films has hindered their widespread use. Generally, large-area hBN layers prepared by chemical vapor deposition (CVD) usually exhibit polycrystalline structures with a typical average grain size of several microns. It has been reported that grain boundaries or dislocations in hBN can degrade its electronic or mechanical properties. Accordingly, large-area single crystalline hBN layers are desired to fully realize the potential advantages of hBN in device applications. In this presentation, we report the growth and transfer of centimeter-sized, nearly single crystal hexagonal boron nitride (hBN) few-layer films using Ni(111) single crystal substrates. The hBN films were grown on Ni(111) substrates using atmospheric pressure chemical vapor deposition (APCVD). The grown films were transferred to arbitrary substrates via an electrochemical delamination technique, and remaining Ni(111) substrates were repeatedly re-used. The crystallinity of the grown films from the atomic to centimeter scale was confirmed based on transmission electron microscopy (TEM) and reflection high energy electron diffraction (RHEED). Careful study of the growth parameters was also carried out. Moreover, various characterizations confirmed that the grown films exhibited typical characteristics of hexagonal boron nitride layers over the entire area. Our results suggest that hBN can be widely used in various applications where large-area, high quality, and single crystalline 2D insulating layers are required.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1997.06a
• /
• pp.25-29
• /
• 1997

The present block-based DCT encoder transforms images regardless of layers and then simply partitions the transformed data into a few layers, for example low and high frequency bands in JPEG. Yet, it fails to utilize the similarity of coefficients in each band. Therefore, we combine the subband coder and the block-based DCt coder in this paper. The new coding scheme enables the data to automatically be classified into several layers and increases the efficiency of transform. Various possible coding structures are investigated and the simulation results are also provided.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.3
• /
• pp.5-13
• /
• 2003

The soil nailing is one of the useful support-system in urban excavation because of the presence of other structures in the vicinity Since the soil nailing system was introduced, model experiments and theoretical studies have been performed to investigate behavior of soil nailed wall. However, there are few data in the case of multi-layered soil strata just like Seoul Metropolitan area in Korea. The feed back analyses are carried out using the measured wall displacement data for soil nailing construction sites with multi-layered strata in order to analyze the distance and the coefficients of extension zone of ground behind soil nailed wall. As a result, the distance of extension zone increased with increasing of the final excavation depth and the ratio of the distance to the final excavation depth was shown to be about 94% of the final excavation depth. Also, the coefficients of extension zone increased with enlargement of soil layer thickness and converged into constant value of 1.05. On the other hand, the maximum vertical displacements by the feed back analysis and Caspe's method were shown to be approximately 80%, 150~280% of the maximum horizontal displacement respectively.

• Applied Microscopy
• /
• v.15 no.2
• /
• pp.98-110
• /
• 1985

This study was performed to clarify the morphological structures of the epithelia of the renal papilla, renal pelvis and ureter of the sheep (Ovis aries L.) through the light and scanning electron microscopes, Tissue specimens were taken from the renal papilla (common renal papilla and peripelvic column) and the renal pelvis (pelvis proper and pelvic pouch) of the kidney and the ureter. For the light microscopy, tissue blocks were fixed in 10 % neutral buffered formalin and embedded in paraffin wax, serially sectioned at a thickness of $6{\mu}m$. These sections were stained with hematoxylin-eosin and periodic acid-Schiff reaction. For the scanning electron microscopy, tissue blocks were prefixed in 1% glutaral-dehyde-1.5% paraformaldehyde solution and postfixed in 1% osmium tetroxide solution, dehydrated in graded alcohol, transferred to isoamyl acetate, and then dried by the critical point dryer (Polaron E 3000). These dried tissues were coated with gold and observed with a scanning electron microscope (JSM-35C), The results were as follows: The apex of the common renal papilla was lined with simple columnar epithelium having many microvilli on its luminal surface. Lateral portion of the papilla was lined with stratified epithelium $2{\sim}3$ layers thick, and its superficial cells were microvillar cells having many microvilli. The epithelium lining the peripelvic column was $1{\sim}2$ layers thick. The superficial layer was made of the microvillar cells, but a few microplica cells were appeared in the region near the pelvic pouch. The epithelium of the pelvic pouch was $1{\sim}2$ layered transitional type, and its superficial cells were microplica cells. The epithelia of the pelvis proper and ureter were $4{\sim}6$ layered transitional type, and their superficial cells were typical facet cells existing many round depressions and ridges of cell membranes of the luminal side.

• Journal of Powder Materials
• /
• v.28 no.2
• /
• pp.150-163
• /
• 2021

Interest in eco-friendly materials with high efficiencies is increasing significantly as science and technology undergo a paradigm shift toward environment-friendly and sustainable development. MXenes, a class of two-dimensional inorganic compounds, are generally defined as transition metal carbides or nitrides composed of few-atoms-thick layers with functional groups. Recently MXenes, because of their desirable electrical, thermal, and mechanical properties that emerge from conductive layered structures with tunable surface terminations, have garnered significant attention as promising candidates for energy storage applications (e.g., supercapacitors and electrode materials for Li-ion batteries), water purification, and gas sensors. In this review, we introduce MXenes and describe their properties and research trends by classifying them into two main categories: transition metal carbides and nitrides, including Ti-based MXenes, Mo-based MXenes, and Nb-based MXenes.

• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.23-36
• /
• 2008

Polymer-clay nanocomposites, a novel organic-inorganic hybrid, attract much attention from both scientific fields and engineering fields due to their balanced improvements in mechanical properties as well as diffusion behaviors, including flame-retarding and barrier properties, with small amounts of clay. Preparation of polymer-clay nanocomposites, summarized as a process for uniform dispersion of hydrophilic layered clays in hydrophobic polymer matrixes, includes several technologies and scientific phenomena, such as surface-modifications of clay layers, physical properties of clays in liquids and dried states, polymer synthesis, polymer rheology, behaviors of polymer solutions/or monomers in the confined geometry, mechanical properties of polymers and clays. To comprehend complicated physical/chemical phenomena involved in the fabrication of nanocomposites, we reviewed physical properties of clays, structures of clays in nanocomposites, characterization of nanocomposites, the relation between morphology and physical property of nanocomposites, surveyed recent research trends, and then suggested a few strategies or methods for fabrication of nanocomposites reflecting future research directions.