• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제14권1호
• /
• pp.26-33
• /
• 2014

This study addresses the control problem of an unmanned aerial vehicle (UAV) during the transition period when the flying mode changes from hovering to translational motion in the horizontal plane. First, we introduce a compensation algorithm that improves height stabilization and reduces altitude drop. The main principle is to incorporate pitch and roll measurements into the feedforward term of the altitude controller to provide a larger thrust force. To further improve altitude control, we propose the fuzzy logic controller that improves system behavior. Simulation results presented in the paper highlight the effectiveness of the proposed controllers.

• 전기학회논문지
• /
• 제60권11호
• /
• pp.2049-2055
• /
• 2011

In this paper a new current control method is proposed for the discontinuous conduction mode of boost converter. The proposed method using a current gain feedforward compensation adjusts a measured inductor current value and then, calculated an average current precisely in the discontinuous conduction mode as well as continuous conduction mode. By applying the proposed method, the current measurement error is significantly reduced to 2% regardless of the operating points. The proposed method is analyzed and its performance is investigated in simulation. To verify the feasibility of the proposed scheme, a 10kW 3-phase interleaved boost converter was built and experimental results are matched to the simulation results.

• 한국정밀공학회지
• /
• 제31권8호
• /
• pp.705-713
• /
• 2014

In this paper, we propose a novel velocity ripple controller using phase compensation feedforward control. Velocity ripples result in many kinds of performance degradations in manufacturing machines, especially such as ultra-precision roll lathes. The generation of velocity ripple in constant velocity control comes from various causes, such as electrical torque ripples, mechanical worn out, inconsistent mass center, etc. Conventional researches about ripple is mainly for reducing torque ripple in actuator level, which is only one of reasons for velocity ripples, so in this study, we focus on eliminating velocity ripples in upper level controller using phase compensation feedforward controller. The proposed algorithm is composed of several modules, such as ripple extractor, phase adjuster and phase follower etc. The suggested algorithm can be easily extended, and it shows a superior performance in the experiments of ultra-precision roll lathes.

• 한국정밀공학회지
• /
• 제21권2호
• /
• pp.83-91
• /
• 2004

This paper illustrates the feasibility and the effectiveness of the disturbance feedforward compensation control proposed in the previous paper. The compensator is designed experimentally by means of the Multiple Filtered-x Least Mean Square algorithm. A 2-DOF active magnetic bearing system subject to base motion is built and the compensation control is applied. The experimental results demonstrate that the compensation control reduces the air-gap responses within 10$%$ of those by the feedback control alone without increasing the control inputs.

• 한국통신학회논문지
• /
• 제37권4A호
• /
• pp.197-204
• /
• 2012

본 논문에서는 피드포워드 방식을 이용하여 전력 증폭기의 비선형성 보상과 스마트 안테나 시스템의 경로 결함 보정을 결합하는 새로운 기술을 제안하였다. 배열 안테나의 각각의 경로들이 동일한 특성을 갖도록 하기 위한 보상과 보정을 위해 선형 식에 3차 항을 추가한 다항식과 피드포워드 방식을 사용하였다. 이 방식은 원래의 기저대역 신호를 변형하지 않으므로, 시스템의 기저대역 부와는 독립적인 스마트 안테나 시스템에 적용할 수 있다. 컴퓨터 모의실험을 통하여, 단 하나의 3차 항을 추가함으로써 전력 증폭기의 비선형 효과를 효율적으로 보상하고, 배열 안테나의 각 경로의 선형 결함들 역시 부차적으로 보정할 수 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.488-493
• /
• 2005

In gun stabilization systems, the torque comes from the unbalance mass of gun and the base acceleration is an important source of disturbance which degrades stabilization performance. Fatigue of gear train is another important factor affecting structural safety problems. In this paper, a feedback control gain is designed by optimal control weighting to difference between motor and gun velocity, and a feedforward controller using FXLMS algorithm is adopted to investigate those problems. Experimental results show that the feedforward compensator based on FXLMS can reduce the disturbance effects. The directional convergence property according to initial conditions of the FXLMS is also shown through experiments.

• 한국정밀공학회지
• /
• 제21권2호
• /
• pp.74-82
• /
• 2004

In this paper, a disturbance feedforward compensator design technique is proposed for an active magnetic bearing system subject to base motion for attenuating disturbance responses. In the consideration of the requirements on the model accuracy in the model based compensator designs, an experimental feedforward compensator design based on adaptive estimation by means of the Multiple Filtered-x least mean square(MFXLMS) algorithm is proposed. The performance and the effectiveness of the proposed technique will be presented in the succeeding paper in which the proposed technique is applied to a 2-DOF active magnetic bearing system subject to base motion.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.294-297
• /
• 1994

A robust position tracking controller of the BLDDM sensitive to the load torque disturbance and inertia variation is constructed It is consisted of the linear feedback controller and the nonlinear feedforward compensator using the neural network. With effietive feedforward compensation of neural network, the robust position control can be obtained, which is verified by computer simulations.

• 대한전자공학회논문지TC
• /
• 제49권4호
• /
• pp.9-17
• /
• 2012

이 논문에서는 광대역 신호에 대한 전력 증폭기의 메모리 효과를 보이고, 메모리 효과와 결합된 비선형성의 보상 방법을 제시하고 그 성능을 분석한다. 메모리 효과와 결합된 전력 증폭기의 모델링과 보상을 위해 볼테라 급수 모델, 위너 모델, 그리고 해머스타인 모델을 검토하였다. 보상 방법으로는 디지털 피드포워드 기술을 제안하였다. 이 방식은 아날로그 방식의 피드포워드 방식에 비해 안정성과 환경 적응성 등이 우수하고, 기존의 디지털 비선형 보상 방식들에 비해 구조가 간단하다. 애질런트사의 ADS를 이용한 모의실험을 통하여 성능을 살펴본 결과 주파수대역 재성장이 20 dB 이상 억압되었으며, 최소한 10 dB 정도의 백-오프 효과가 있음을 확인하였다. 보상 성능, 구현의 복잡도, 수렴 속도 등을 고려할 때 위너 모델이 제안하는 방식에 가장 적합하다는 결론을 내릴 수 있다.

• 제어로봇시스템학회논문지
• /
• 제10권7호
• /
• pp.590-596
• /
• 2004

A passivity-based dynamic output feedback controller design is considered for a finite collection of non-square linear systems. Design of a single controller for a set of plants i.e. simultaneous stabilization is an important issue in the area of robust control design. We first determine a squaring gain matrix and an additional dynamics that is connected to the systems in a feedforward way, then a static passivating control law is designed. Consequently, the actual feedback controller will be the static control law combined with the feedforward dynamics. A necessary and sufficient condition for the existence of the parallel feedforward compensator is given by the static output feedback formulation. In contrast to the previous result [1], a technical condition for constructing the parallel feedforward compensator is removed by proposing a new type of the parallel compensator.