• 대한전자공학회논문지SD
• /
• 제48권1호
• /
• pp.31-38
• /
• 2011

고속 전송 시스템에 대한 수요가 증가함에 따라 채널의 제한된 대역폭을 극복하기 위한 적응형 등화기가 수신기에 널리 사용되고 있다. 수신기 칩의 테스트 비용을 절감하기 위하여 칩 내부에서 데이터의 아이 열림 정도를 측정할 수 있는 온 칩 eye-opening monitoring (EOM) 기술이 사용될 수 있다. 본 논문에서는 EOM 기능을 탑재한 10Gb/s 적응형 2탭 look-ahead decision feedback equalizer (DFE)를 제안한다. 제안된 EOM 회로는 기존의 방식과 달리 look-ahead DFE의 등화 신호를 모니터링 할 수 있다. 수신 신호의 아이로부터 포스트 커서의 크기를 측정한 후, 등화 계수가 제안된 알고리즘에 의하여 계산된다. 제안된 회로는 90nm CMOS 공정에 설계되었으며 알고리즘과 함께 post-layout 시뮬레이션을 통하여 동작을 검증하였다. DFE 코어논 $110{\times}95{\mu}m^2$의 면적을 가지고 1.2V의 전원에서 11mW를 소모한다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.103-108
• /
• 1999

This paper describes development of a new automated real-time system which preforms measurement data reduction and management, geotechnical backanalysis, and feedback design for embankment construction on soft ground. Such a system can be an effective, useful and economical tool for managing a large site development on soft ground. The system consists of data base system to characterize soil properties and identify instrumentation, analysis system for ground behavior and stability coupled with automatic monitoring system, and feedback design system which is a new technique to reflect the analysis of measured ground behavior against original design.

• 의학교육논단
• /
• 제19권2호
• /
• pp.83-89
• /
• 2017

The aim of this study is to examine the effect of recorded video monitoring on students' self-reflection after completing their clinical performance examination. Taking into account the particular cases involved in the examination, the present study utilized history-taking, physical examination, and patient education as bases for evaluating information-establishment ability, and asking, listening, understanding, explaining, and connectedness as the bases for evaluating patient-physician interaction ability. Student self-monitoring through recorded video feedback was carried out three days after completion of their clinical performance examination. Students self-evaluated their performance with a 10-point scale before and after self-monitoring. The results of this study show that students have a general tendency to lower their own self-evaluation scores after self-monitoring. Although there was not a statistically significant change of interrelationship in the information-establishment ability evaluation, there was a meaningful change of interrelationship in the patient-physician interaction ability evaluation after self-monitoring; specifically, in the case of acute lower abdominal pain, a high correlation was found (r=0.31, p=0.02) between the evaluation scores of standardized patients and students related to patient-physician interaction ability. This implies that self-monitoring enables the students to acquire a reflective viewpoint from which to evaluate their own performance. Therefore, it can be said that self-monitoring through recorded video feedback is a valuable method for students to use in reviewing their performance in patient-physician interactions.

• Journal of Welding and Joining
• /
• 제21권4호
• /
• pp.80-86
• /
• 2003

Arc-spot welding is generally used in joining of precise parts such as case and core in electric compressor. It is important to control joining deformation in electric compressor because clearance control of micrometer order is needed for excellent airtightness and anti-nose. The countermeasures for this deformation in field have mainly been dependent on rule of try and error by operator's experience because of productivities. For control this deformation problem without influence on productivities, development of exact simulation model should be needed. In this study, on the basis of previous study, the analysis model io predict deformation of precise order in arc-spot welded structure with non-uniform stiffness is brought up through feedback and tuning between monitoring data and analysis results. For this, deformation monitoring system was built and boundary condition considering mechanical melting temperature was applied.

• 대한안전경영과학회지
• /
• 제7권5호
• /
• pp.213-231
• /
• 2005

Assignable causes producing temporary deviation from the underlying system can influence on process adjustment and process monitoring in dynamic feedback control system. In this paper, the influence of assignable causes on EWMA forecasts and compensatory variables are derived for a dynamic feedback control system. An example is presented to confirm the impact numerically through the analysis of a data.

• 디지털콘텐츠학회 논문지
• /
• 제15권2호
• /
• pp.219-225
• /
• 2014

현대는 기업 간의 경쟁이 날로 심화되어 가고 있는 가운데 효율적인 경영을 위해서는 시시각각으로 변하는 고객의 니즈를 파악하여야 하기 때문에 그 어느 때 보다도 고객피드백이 필요한 시대이다. 최근 스마트 폰의 출현과 트위터, 페이스북과 같은 SNS의 발달로 실시간으로 다양한 고객의 목소리가 증가하면서 고객의 피드백을 파악하기 위해 이러한 빅 데이터를 이용 하는 것이 매우 효율적인 방법으로 부상하고 있다. 빅 데이터의 데이터 수집과 분석은 버즈(Buzz) 모니터링이라는 시스템을 통해 이루어지고 있다. 본 연구에서는 고객자체가 기업의 자산이며 서비스 산업의 대표라 할 수 있는 호텔기업의 CRM을 위한 방법으로 고객의 피드백을 파악하기 위해 빅 데이터를 활용하는 방법을 제안한다. 실제 국내 3개의 대표적인 특급호텔을 대상으로 빅 데이터를 이용하여 버즈모니터링 시스템을 통해 얻은 호텔고객평판 사례를 제시하여 그 결과를 분석하고 시사점을 고찰해 본다.

• Ocean and Polar Research
• /
• 제25권spc3호
• /
• pp.409-416
• /
• 2003

Coastal development works generally increase the suspended sediment concentration of the ambient water, causing environmental impacts in various manners. The most active measures in three sides have been reviewed for their applicabilities in Korea. Referring to the cases in the USA, the legislation of environmental windows seems to be not proper for Environmentally Sound and Sustainable Developments (ESSD) until sufficient scientific data are obtained to address the individual issues of potential negative impacts. Feedback monitoring can be regarded as the best way for ESSD. Korea also has the basic legal system for the feedback monitoring as well as Environmental Impact Assessments (EIA). However, the frequency, period and parameter of related surveys should be improved for the true ESSD. Moreover, environmental facilities such as environmental dredgers should be widely used for mitigating environmental Impacts caused by coastal development works.

• 환경영향평가
• /
• 제9권4호
• /
• pp.315-322
• /
• 2000

Environmental Impact Assessment(EIA) was first formally established in the Korea in 1981. Subsequently there has been a rapid growth in EIA activity, and over one hundred fifty environmental impact statements are now published in Korea each year. Although EIA now has almost 20 years of history in the Korea, elsewhere the development of roles and practice is more recent. Development is moving apace in many countries, including the Japan and the EU Member States. Such progress has not been without its problems, and a number of the current issues in EIA-scope of the assessment, the relative roles, the quality of assessment and monitoring and auditing after decision, and so on- are highlighted. So the purpose of this article is to reform the EIA roles and process, in extending the scope of activity, and assessing effectiveness. This article suggested improving the effectiveness of project assessment, widening the scope: stretegic environmental assessment, and extending EIA to project design process, environmental monitoring and feedback system.

• Journal of Welding and Joining
• /
• 제20권4호
• /
• pp.544-550
• /
• 2002

Arc-spot welding is generally used in joining of precise parts such as case and core in electronic compressor. It is important to control joining deformation in electronic compressor because clearance control in micrometer order is needed for excellent airtightness and anti-nose. The countermeasures far this deformation in field have mainly been dependent on the rule of try and error by operator's experience because of productivities. For control this deformation problem without influence on productivities, development of exact simulation model should be needed. In this study, to solve this deformation problem in arc-spot welded structure with case and core, we intend to make a simulation model that is able to predict deformation in precise order by tuning and feedback between sensing data and simulation results. This paper include development of heat input model for arc-spot welding, temperature monitoring and make a heat transfer model using sensing data in product.

• 대한안전경영과학회지
• /
• 제2권4호
• /
• pp.19-32
• /
• 2000

Assignable causes producing temporary deviation from the underlying system can influence on process adjustment and process monitoring in dynamic feedback control system. In this paper, the impact of assignable causes on EWMA forecasts and process adjustment which is based on the EWMA forecasts are derived for optimum control methods.