• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.95-98
• /
• 2002

Three-dimensional flow analyses for two different ratios of radius to height of sedimentation bed are implemented to evaluate the effect of blockage ratio of center feed wall and angle of distributor on sedimentation efficiency, and to find the optimal value of those parameters. Sedimentation efficiencies for three different shapes are compared with and without rotation speed. And then, five different combinations of blockage ratio of center feed wall and angle of distributor are compared It reveals that the effect of blockage ratio of center fled wall and angle of distributor is considerable to sedimentation efficiency while rotation effect can be neglected and $0.55 and 33^{\circ}$for blockage ratio of center food wall and angle of distributor, respectively, ive the best sedimentation efficiency.

• 오토저널
• /
• 제13권6호
• /
• pp.109-118
• /
• 1991

In this study, it is intended to investigate the effect of the grinding conditions such as table feed, down feed, cross feed of residual stress distribution. And this distribution is investigated upon the grinding direction and the its orthogonal direction at ground layers. The material is used carbon steel (SM20C) which usually used to motor axis. And in order to be considered as Bernoulli-Euler beam, the dimension of the specimen is appropriately designed. According as corroiding the ground surface, the residual stress layers are removed and strain which occured on account of unbalance of internal stress is detected by rosette-gate. Through A/D converter and computer, these values are saved and evaluated residual stress by stress-strain relation formula. Finally, these results are diagrammatized with Auto Cad. The results obtained are as follows. As the depth from the ground surface increases in grinding direction and its orthogonal direction, tensile residual stress exists in the surface, and subsequently it becomes compressive residual stress as it goes downward. As the table feed, the cross feed and the down feed increase, maximum residual stress is transformed form the tensile to the compressive.

• Membrane and Water Treatment
• /
• 제10권5호
• /
• pp.387-394
• /
• 2019

Membrane distillation (MD) is one of the water treatment processes which involves the momentum, heat and mass transfer through channels and membrane. In this study, CFD modeling has been used to simulate the heat and mass transfer in the direct contact membrane distillation (DCMD). Also, the effect of operating parameters on the water flux is investigated. The result shows a good agreement with the experimental result. Results indicated that, while feed temperature is increasing in the feed side, water flux improves in the permeate side. Since higher velocity leads to the higher mixing and turbulence in the feed channel, water flux rises due to this increase in the feed velocity. Moreover, results revealed that temperature polarization coefficient is rising as flow rate (velocity) increases and it is decreasing while the feed temperature increases. Lastly, the thermal efficiency of direct contact membrane distillation is defined, and results confirm that thermal efficiency improves while feed temperature increases. Also, flow rate increment results in enhancement of thermal efficiency.

• 한국버섯학회지
• /
• 제17권2호
• /
• pp.47-51
• /
• 2019

Our research on juvenile Oncorhynchus masou masou in oyster mushroom supplemented diet was studied to investigate the effect of feeding. Mixing of feed ingredients for dried oyster mushrooms, 3.5, 7.0, 10.5, 14.0 (%) was added to the amount of oyster mushroom dietary beta-glucan content of the more abundant. After the weight of feed given to salmon survey oyster mushrooms diet for 3.5 to 7.0% was similar to the formula feed and the weight of the fish ate oyster mushroom feed over 10.5% were reduced. The oyster mushroom of the experimental diets containing 3.5 to 7.0 percent hepatosomatic index and feed coefficient figure was similar to those of the formulated diets. Therefore we have juvenile cherry salmon fed diets containing 3.5 to 7.0% was considered good to eat and additional research on the immune response will be carried out was necessary.

• 한국환경과학회지
• /
• 제31권12호
• /
• pp.1135-1138
• /
• 2022

This study was conducted to evaluate the effects of sipjeondaebo-tang by-product powder on the growth performance of broilers. A total of 120 broiler chicks (Arbor acres) at 0 days old were assigned to one of two treatments with three replications: control and 1% sipjeondaebo-tang by-product powder. Weight gain at 3 weeks and feed intake at 5 weeks were significantly (p<0.05) influenced by the sipjeondaebo-tang by-product powder treatments. However, there were no significant differences in the feed conversion ratio between treatments as a function of treatment time (p>0.05). Overall, weight gain and the feed conversion ratio were slightly greater for the sipjeondaebo-tang by-product powder treatment than the control treatment. It was concluded that sipjeondaebo-tang by-product powder may be an appropriate source of feed additive, without any negative effects on the growth performance of the broilers.

• 한국정밀공학회지
• /
• 제10권1호
• /
• pp.62-69
• /
• 1993

The accuracy of machine tools is the major factor concerned with the acuracy of the processed work. The feed errors of feed system in machine tool, therfore, make the machining errors of work directly on processing. In this point, this study focused on the generative elements of feed errors in CNC cylindrical grinding machine, such as supporting method of ball screw, the effect of pitch and yaw error and the position detecting method in servo system when operating its shaft of grinding wheel head. Furthermore, in order to improve the driving accuracy of this machine tool, feed errors are measured by a laser interferometer. Results obtained in this study provide some useful informations to attain high accuracy of CNC machine tool.

• 한국항공우주학회지
• /
• 제37권4호
• /
• pp.419-424
• /
• 2009

소형 인공위성의 궤도 보정을 위한 300 W급 홀 추력기의 제논연료공급장치를 개발하였다. 가스 상태의 제논 연료를 150 bar에서 2 kg을 저장할 수 있으며, 0.5 SCCM의 미세 유량을 제어할 수 있다. 미세 유량을 제어할 수 있는 유량 제어밸브의 구동을 위해 시스템을 구성하고, 시험을 통해 성능검증을 수행하였다. 이를 통해 $1.0{\times}10^{-6}$ torr압력의 진공에서 연료공급장치가 성공적으로 동작함을 확인하였다.

• 대한본초학회지
• /
• 제21권1호
• /
• pp.1-7
• /
• 2006

Objectives: To find out the effects GGT1, an antiobestic drug widely used clinics, has on the amount of feed intake, the amount of change in the body weight and the food efficiency ratio using the data from the hGHTg obese male rats. Also, to evaluate in terms of antiobestic effects, the difference between GGT1 and reductil (sibutramine), which has been approved by the FDA of the United States. Methods: We measured the change in body weight and the amount of feed intake for 8 weeks by categorizing the hGHTg obese male rats into three groups: the control group, the GGT1 group, and the reductil (RD) group. We also evaluated the antiobestic effect by calculating the food efficiency ratio, which is the increase of bodyweight divided by the amount of feed intake. Results: In case of body weight, moderate slope of the curve in the graph of GGT1 group could mean that the weight is decreasing as time flows. In case of food efficiency ratio, the p-value was 0.745 in a test for determining if an interaction exists between the group and the point of measurement, meaning that it does not exist; also, the p-value in a test for the effect of level of repetition in food efficiency ratio according to the point of measurement equaled 0.002. Conclusion: The drug-treated groups had a greater inhibitory effect in feed intake than the control group. The results showed the food efficiency ratio had a tendency to decrease. The GGT1 group in particular was under a greater effect than the RD group.

• 동력기계공학회지
• /
• 제5권3호
• /
• pp.73-79
• /
• 2001

The purpose of this investigation is experimentally to clarify the machinability and tool wear of STS 304 steel pipe material for piping. In order to determine the effects of cutting parameters and tool wear on thrust, torque, AE RMS, drilling is conducted on CNC milling machine. In this experiment, it is measured that thrust, torque, tool wear length, tool wear area and AE RMS during drilling using Hss tool. It has been found that a) During the drilling, the thrust and the torque of the STS 304 pipe are received more the effect of the feed than the spindle speed and the thrust increase with the increase of feed, b) The value of the AE RMS is been larger the effect of the cutting speed than the feed rate, and the value of the AE RMS increase with the increase of spindle speed, c) It has been found that the suitable feed in feed condition of 0.03, 0.05, 0.1, 0.15mm/rev is below 0.05mm/rev, d) The value of the AE RMS was shown a characteristic of the jump value during it was a sudden inrcrease of the tool wear. The increased character of the AE RMS value can be known an effective factor of the tool wear detection, and e) It can be quantitatively evaluated the condition of the tool according to calculate a area of the drill wear image which is obtained by a vision system.

• Journal of Microbiology and Biotechnology
• /
• 제16권8호
• /
• pp.1248-1254
• /
• 2006

The effect of Spirulina platens is and probiotics as feed additives on the growth of the shrimp Fenneropenaeus chinensis was investigated in comparison with a control. The shrimp were cultured in rearing tanks in a seawater pond for 35 days from September 1, 2004. As regards the water quality, the probiotic treatment (T2, commercial diet and 3% probiotics) produced a lower TDN (total dissolved nitrogen) and TDP (total dissolved phosphorus), making it effective in water quality improvement. Nonetheless, the phytoplankton flora succeeded from diatoms to cyanobacteria, regardless of the feed additives. Treatment T3, including 3% S. platensis, produced the highest mean body weight, which was 39% higher than that for all the other treatments (P<0.05). Accordingly, it was found that the use of Spirulina and probiotics as feed additives increased the shrimp body weight and improved the water quality, respectively.