• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.279-282
• /
• 2008

The vertical forces in rail fasteners at areas of bridge transitions near the embankment and on the pier will occur due to different deformations of adjoining bridges caused by the trainloads. The up-lifting forces is not large problem in the blast track because the elasticity of blast and rail pad buffs up-lifting effect. But, it is likely to be difficult to ensure the serviceability of the railway and the safety of the fastener in the end in that concrete slab track consist of rail, fastener, and track in a single body, delivering directly the up-lifting force to the fastener if the deck is bended because of the end rotation of the overhang due to the vertical load. When the up-lifting force exceeds the clamp force of the fastener clip, the rail pad is out of fastener, which makes decrease the serviceability of the railway, such as noise and vibration. Furthermore, it is possible to reduce the safety of the track as the longitudinal resistance. This study is focused on guideline suggestion to decrease up-lifting force in the fastener adjacent to the civil joint of slab track of bridge throughout the parametric analysis between the vertical spring stiffness of the fastener as the material approach, the space of fastener adjacent to bridge transition, the rigidity of the girder as the geometrical approach and up-lifting force under the train load.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1078-1083
• /
• 2008

In this paper, assessed are the stability of vehicle and track according to vertical support stiffness difference on the transition between conventional and zero-longitudinal resistance (ZLR) rail fastener on bridge. For this, the spring constants of rail fastener have been determined according to different load ranges - KTX load (with or without impact factor) and test load of EN standards - from results of laboratory test on rail pad, the stability analysis of vehicle and track has been performed according to numbers or installation length of ZLR fasteners using vertical vehicle-track coupled model to consider train-track interaction. The analysis results reveal that only the wheel load variation slightly exceed the limit value when 2 ZLR fasteners are used with spring constant determined within the EN test load range, but, in all other cases, all evaluation items are satisfied. Thus, it can be said that the stability of vehicle and track will not be degraded by ZLR fastener.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.800-806
• /
• 2011

Thermal expansion which occurs at the high speed rail joint is proportional to the free length from the point of fixity. This thermal expansion behaves similar to free expansion because the girder longitudinal stiffness is much larger than longitudinal resistance of rail pads. But the longitudinal displacement in the long rail is nominal because the longitudinal support condition of the girder is normally MFM(movable-fix-movable) system. Due to these girder expansion characteristics, there is longitudinal relative displacement at the rail pad and rail fastener spring which connects rail and girder. If the relative displacement between rail and girder is beyond the elastic limit for the rail pad, rail fastener system shall be applied using sliding fastener to prevent rail pad damage and fastener separation resulting from slip. On the other hand, train vertical vibration and tilting can occur due to the lack of fastener vertical force if the sliding fastener is applied at the girder joint. In the high speed rail bridge, vibration can occur due to the spring stiffness of the elastomeric bearing, also both vertical downward and upward displacement can occur. The elastomeric bearing vertical movement can cause rail displacement and finally the stability of the ballast is reduced because the gravel movement is induced.

• Structural Engineering and Mechanics
• /
• 제28권2호
• /
• pp.239-257
• /
• 2008

Double-sided punched metal plate timber fasteners present projections on both sides, which offer improved joint fire resistance and better joint aesthetics. In this paper, 3-D nonlinear finite element models were developed to simulate double-sided nail plate fastener timber joints. The models, incorporating orthotropic elasticity, Hill's yield criterion and elasto-plasticity and contact algorithms, are capable of simulating complex contact between the tooth and the timber and between the base plate and the timber in a fastener. Using validated models, parametric studies of the double-sided nail plate joints was undertaken to cover the tooth length and the tooth width. Optimal configuration was assumed to have been attained when increase in nail plate tooth width did not result in a raise in joint capacity, in conjunction with the optimum tooth length. This paper presents the first attempt to model and optimise tooth profile of double-sided nail plate fastener timber joints, which offers rational designs of such fasteners.

• Journal of the Korean Wood Science and Technology
• /
• 제36권4호
• /
• pp.58-65
• /
• 2008

집성재의 구조부재로서의 이용에 있어서는 접합철물(connector)과 파스너(fastener)에 의한 접합이 대부분을 차지하고 있다. 이들 접합부의 역학적 거동은 파스너의 지압과 부재의 전단현상으로 설명할 수 있다. 집성재 내의 층재 구성상태에 따른 전단성능, 2면전단 핀접합부의 인발에 의한 전단성능, 실대 기둥-보 2면전단 핀접합부의 모멘트 저항성능을 검토하였다. 집성접착된 부위의 경우, 두 층재간의 보완작용에 의해 밀도 및 전단강도에 있어서도 적층효과를 발휘하였다. 소시험편의 전단강도를 이용한 핀접합부의 2면전단강도와 모멘트 저항성능을 예측할 경우 다소의 보정이 필요할 것으로 판단되었다. 기둥-보 접합부의 모멘트저항성능 예측은 소시험편 전단강도의 10%를 저감하여 이용하면 안전하게 예측가능한 것으로 판명되었다.

• 한국도시철도학회논문집
• /
• 제6권4호
• /
• pp.327-337
• /
• 2018

무도상 판형교는 교량 바닥판과 도상 없이 주거더에 궤도가 직접 연결되어 있는 구조로 열차 통과로 인하여 발생한 충격이 교량 주부재에 직접 전달되어 높은 수준의 소음 진동 뿐 아니라 교량의 잦은 손상을 유발하는 특성이 있다. 레일 장대화는 무도상 판형교의 이러한 구조적인 문제를 경감할 수 있으며, 이를 위해서는 차량-궤도 또는 궤도-교량 상호작용에 영향을 미치는 인자의 특성에 대한 명확한 이해가 필요하다. 이 연구에서는 레일체결장치, 침목고정장치 및 궤광을 포함한 실제 무도상 판형교에 설치되어 있는 궤도의 종방향 저항력 특성을 실험을 통하여 검토하였다. 실험은 유도상화 시공을 위하여 철거된 실제 교량을 실험실로 이송하여 수행하였다. 실험 결과 목침목용 레일체결장치의 종방향저항력은 KRS TR 0014-15의 성능합격기준을 만족하며, 교량침목고정장치의 종방향 저항력은 구형과 신형 모두 기존 연구보다 높은 값으로 나타났다. 또한 하중 비재하 시 무도상 궤도의 종방향 저항력은 자갈궤도와 콘크리트궤도 사이의 값으로 나타났다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.87-90
• /
• 2008

Since fastener bolt for airplane require high specific strength and corrosion resistance, Ti-6Al-4V alloy is widely used. However, the Ti-6Al-4V bolt is generally manufactured by cutting and rolling because of their poor workability. The aim of present work is to develop hot forming technology for high strength Ti-6Al-4V. Various heat-treatments were applied to specimen in order to increase hot-workability and prevent galling with die Multiple forging were simulated with FE code to determine optimum process parameters including specimen temperature, strain rate, local strain, and thermal shrinkage. Forged samples were heat-treated again to increase their mechanical properties.

• 소성∙가공
• /
• 제18권3호
• /
• pp.251-255
• /
• 2009

Since fastener bolt for airplane require high specific strength and corrosion resistance, Ti-6Al-4V alloy is widely used. However, the Ti-6Al-4V bolt is generally manufactured by cutting and rolling because of their poor workability. The aim of present work is to develop hot forming technology for high strength Ti-6Al-4V. Various heat-treatments were applied to specimen in order to increase hot-workability and prevent galling with die. Multiple forging were simulated with FE code to determine optimum process parameters including specimen temperature, strain rate, local strain, and thermal shrinkage. Forged samples were heat-treated again to increase their mechanical properties.

• 한국철도학회논문집
• /
• 제18권2호
• /
• pp.139-148
• /
• 2015

자갈궤도에서 레일과 침목을 연결하는 체결장치의 레일패드 강성이 증가함에 따라 윤중이 증가하고 궤도틀림진전이 증가되어 궤도유지보수비가 증가하게 된다. 반면에 레일패드강성이 감소하면 차량운행에 따른 전력소모비가 증가하게 된다. 따라서 자갈궤도 설계 시에 차량과 궤도 및 운영조건을 고려하여 궤도유지보수비와 전력소모비를 가급적 작게 할 수 있는 적정 레일패드강성을 결정하는 것은 철도 경제성 확보차원에서 중요한 과제라 할 수 있다. 본 연구에서는 L$\acute{o}$pez Pita 등이 제시한 자갈궤도에서의 최적레일패드 강성을 평가하는 프로세서를 기초로 적정 레일패드강성 범위를 구하였다. 연구결과에 중요한 영향을 주는 레일패드강성에 따른 윤중변화를 보다 정확하게 평가하기 위하여 궤도구성품의 거동특성을 보다 상세하게 고려할 수 있는 고도화된 수치해석적 기법을 사용하여 평가하였다. 또한 국내에서의 차량, 궤도 운영조건을 고려함으로써 국내에서 궤도설계에 적용할 수 있는 적정 레일패드강성 범위를 도출하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.10-11
• /
• 2019

Interior stone walls are using commonly in non-bearing lightweight walls of apartments. The stones of interior wall were two types, one is a granite stone, another is a marble stone. Granite stone is attached by the epoxy adhesive and marble stone is attached by dedicated anchor and fastener. The impact resistance test was carried out interior stone walls in accordance with KS F 2613. The test methods included the impact resistance tests by each of soft impact body and hard impact body. The results of the test have proved that interior stone walls can withstand the soft impact bodies and hard impact bodies that are likely to happen in everyday life.