• Geomechanics and Engineering
• /
• 제30권3호
• /
• pp.219-231
• /
• 2022

Geotechnical materials such as silt, fine sand, or coarse granular soils may be unstable under undrained shearing or during rainfall infiltration starting an unsaturated state. Some researches are available describing the instability of coarse granular soils in drained or undrained conditions. However, there is a need to investigate the instability mechanism of unsaturated silty soil considering the effect of degree of compaction and net confining stress under partially and fully drained conditions. The specimens in the current study are compacted at 65%, 75%, & 85% degree of compaction, confined at pressures of 60, 80 & 120 kPa, and tested in partially and fully drained conditions. The tests have been performed in two steps. In Step-I, the specimens were sheared in constant water content conditions (a type of partially drained test) to the maximum shear stress. In Step-II, shearing was carried in constant suction conditions (a type of fully undrained test) by keeping shear stress constant. At the start of Step-II, PWP was increased in steps to decrease matric suction (which was then kept constant) and start water infiltration. The test results showed that soil instability is affected much by variation in the degree of compaction and confining stresses. It is also observed that loose and medium dense soils are vulnerable to pre-failure instability i.e., instability occurs before reaching the failure state, whereas, instability in dense soils instigates together with the failure i.e., failure line (FL) and instability line (IL) are found to be unique.

• Journal of information and communication convergence engineering
• /
• 제10권1호
• /
• pp.11-20
• /
• 2012

In a marine ubiquitous sensor network (USN) system using expensive sensors in the harsh ocean environment, it is very important to discover failures and devise recovery techniques to deal with such failures. Therefore, in order to perform failure modeling, this study analyzes the USN-based real-time water quality monitoring service of the Gaduri Aqua Farms at Songdo Island of Yeosu, South Korea and devises methods of discovery and recovery of failure by classifying the types of failure into system element failure, communication failure, and data failure. In particular, to solve problems from the perspective of data, this study defines data integrity and data consistency for use in identifying data failure. This study, by identifying the exact type of failure through analysis of the cause of failure, proposes criteria for performing relevant recovery. In addition, the experiments have been made to suggest the duration as to how long the data should be stored in the gateway when such a data failure occurs.

• 산경연구논집
• /
• 제9권7호
• /
• pp.19-32
• /
• 2018

Purpose - This paper aims at exploring the effects of failure types such as failure in promotion orientation and failure in prevention orientation on consumers' consumption behavior, and the moderation role of lay theories in the effects. Research design, data, and methodology - This study employed 2 between-subject designs(failure in promotion orientation vs. failure in prevention orientation) and also 2 (failure in promotion orientation vs. failure in prevention orientation) with implicit self as the within-subject. Chinese consumers participated in the empirical study, and to verify the hypotheses ANOVA, T-test and regression analysis were used. Results - Consumers were more likely to choose adaptive consumption behavior rather than compensatory consumption behavior when they were encountered with failure in promotion orientation versus failure in prevention orientation. Lay theories did play the moderation role in the effect of failure types on consumption behavior. The incremental theorists who think that effort is an important way to accomplish their learning goals showed more willingness to conduct compensatory consumption behavior rather than adaptive consumption behavior. Conclusions - Marketers should put more attention on the ways by which their products can help consumers self-improve when consumers encounter with failure. They should also be aware of the importance of consumers' mindsets when designing and developing advertising messages.

• 한국경영과학회지
• /
• 제36권4호
• /
• pp.29-41
• /
• 2011

As industires are evolving into a more advanced type industrial system, service economy has been more emphasized. But with the expansion of the service economy, the failure of the service has also increased. Customers flee caused by the service failure leads to from simple problems like financial loss to serious problems like damaging corporate image. Therefore, if possible, the system providing defect-free service should be established. If this is not possible, preventive measures should be taken in order to minimize the failure. The study as a tool to prevent service failure presents the concepts "service error matrix." And to confirm whether this idea is practical or not, this study investigated the hotel, one of the leading service industries, about actually occurring service failure and applied to service error matrix suggested in this study. Finally service blueprint and Poka-yoke are completed in order to reduce service failure of Y hotel which was the object of the interview for this study.

• 대한기계학회논문집A
• /
• 제29권7호
• /
• pp.947-954
• /
• 2005

The purpose of this study is to develop failure pressure evaluation models, which are applicable to straight pipes and elbows containing an internally wall thinning defect induced by flow-accelerated-corrosion (FAC). In this study, thus, three dimensional finite element (FE) analyses are performed to investigate the dependences of failure pressure of internally wall thinned pipe on the defect shape, the pipe geometry, and the defect location and bend radius of elbow. Also, the existing failure pressure assessment models for externally wall thinned pipes are examined. Based on these, the new models for assessing failure pressure of piping components with an internally wall thinning defect are proposed. Comparison of failure pressure, predicted by proposed models, with FE analysis result shows good agreement regardless of pipe type, defect shape, and defect location and bend radius.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.357-362
• /
• 2001

The pipe fracture tests were performed on 102mm-Sch.80 carbon steel pipe with various local wall thinning shapes, in order to understand failure behavior of thinned pipe. Pipe specimens were subjected to monotonic bending moment, using 4-points loading system, under internally pressurized condition. From the results of experiment, the failure mode, load carrying capacity, and deformability of local wall thinning pipe were investigated. Failure mode of thinned pipe depended on magnitude of internal pressure and thinning length as well as loading direction and thinning depth and angle. The variation in load carrying capacity and deformability of thinned pipe with length of thinned area was determined by stress type appled to thinning region and circumferential thinning angle. Also, the effect of internal pressure on failure behavior was dependent on failure mode of thinned pipe, and it promoted crack occurrence and mitigated local buckling at thinned area.

• Journal of Information Processing Systems
• /
• 제15권1호
• /
• pp.55-66
• /
• 2019

Storage system often applies erasure codes to protect against disk failure and ensure system reliability and availability. Liberation code that is a type of coding scheme has been widely used in many storage systems because its encoding and modifying operations are efficient. However, it cannot effectively achieve fast recovery from single disk failure in storage systems, and has great influence on recovery performance as well as response time of client requests. To solve this problem, in this paper, we present HRSF, a Hybrid Recovery method for solving Single disk Failure. We present the optimal algorithm to accelerate failure recovery process. Theoretical analysis proves that our scheme consumes approximately 25% less amount of data read than the conventional method. In the evaluation, we perform extensive experiments by setting different number of disks and chunk sizes. The results show that HRSF outperforms conventional method in terms of the amount of data read and failure recovery time.

• Communications for Statistical Applications and Methods
• /
• 제5권3호
• /
• pp.723-731
• /
• 1998

In this paper, we consider a hierarchical Bayes estimation of the parameter, the reliability and hazard rate function based on samples from a Burr type X failure model. Bayes calculations can be implemented by means of the Gibbs sampler and a numerical study us provided.

• International Journal of Reliability and Applications
• /
• 제3권1호
• /
• pp.51-60
• /
• 2002

This paper presents the methodology for obtaining point and interval estimating of the parameters of a new two-parameter distribution with multiple-censored and singly censored data (Type-I censoring or Type-II censoring) as well as complete data, using the maximum likelihood method. The basis is the likelihood expression for multiple-censored data. Furthermore, this model can be extended to a three-parameter distribution that is added a scale parameter. Then, the parameter estimation can be obtained by the graphical estimation on probability plot.

• 한국심리학회지 : 문화 및 사회문제
• /
• 제18권2호
• /
• pp.153-167
• /
• 2012

본 연구는 서두름 행동의 5요인의 특성에 초점을 맞추어, 서두름 행동과 A형 행동의 관계를 바탕으로 서두름 행동의 5요인의 특성을 밝히고자 진행되었다. 이를 위해, 만 18세 이상 59세 이하 성인 207명이 서두름 행동 질문지와 A형 행동 질문지에 응답하였다. A형 행동 질문지는 A형 행동 및 성격을 측정하는 기존 문항을 바탕으로 총 136개 문항을 수집하였다. 그리고 요인분석을 통해 6개 요인으로 이루어진 29개 문항으로 축소되었다. A형 행동의 구성요인으로 성공추구, 인내부족, 실패불안, 과제몰입, 활동성, 민첩성이 나타났다. 서두름 행동요인분석 결과, 서두름 행동은 기존 연구와 동일한 5가지 요인으로 이루어져 있었다. 서두름 행동과 A형 행동의 상관분석 결과, 시간압력에서 나타나는 서두름 행동은 성공추구, 실패불안, 과제몰입, 민첩성과 정적상관을 보였다. 불편함에서 나타나는 서두름 행동과 고립에서 나타나는 서두름 행동은 인내심부족과 정적상관을 보였다. 지루함에서 나타나는 서두름 행동은 성공추구와 활동성 및 민첩성과 정적 상관이 있었다. 보상기대에서 나타나는 서두름 행동은 성공추구, 인내부족, 실패불안, 민첩성과 정적상관을 가지는 것으로 나타났다.