• Journal of Applied Reliability
• /
• v.18 no.3
• /
• pp.220-228
• /
• 2018

Purpose: The purpose of this study is to investigate the tail behavior of the life distribution which exhibits an increasing failure rate or other positive aging effects after a certain time point. Methods: We characterize the tail behavior of the life distribution with regard to certain reliability measures such as failure rate, mean residual life and reliability function and derive several stochastic properties regarding such life distributions. Also, utilizing an L-statistic and its asymptotic normality, we propose new nonparametric testing procedures which verify if the life distribution has an increasing tail failure rate. Results: We propose the IFR-Tail (Increasing Failure Rate in Tail), DMRL-Tail (Decreasing Mean Residual Life in Tail) and NBU-Tail (New Better than Used in Tail) classes, all of which represent the tail behavior of the life distribution. And we discuss some stochastic properties of these proposed classes. Also, we develop a new nonparametric test procedure for detecting the IFR-Tail class and discuss its relative efficiency to explore the power of the test. Conclusion: The results of our research could be utilized in the study of wide range of applications including the maintenance and warranty policy of the second-hand system.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.254-260
• /
• 2019

The failure rate of bidirectional dc-to-dc converter is predicted through the failure mode and effect analysis (FMEA) and the fault-tree analysis (FTA) considering the operational risk. In order to increase the driving voltage of the electric vehicle efficiently, the bidirectional converter is attached to the front of the inverter. It has a boost mode for discharging battery power to the dc-link capacitor and a buck mode for charging the regenerative power to the battery. Based on the results of the FMEA considering the operating characteristics of the bidirectional converter, the fault-tree is designed considering the risk of the converter. After setting the design parameters for the MCU for the electric vehicle, we analyze the failure rate of the capacitor due to the output voltage ripple and the inductor component failure rate due to the inductor current ripple. In addition, we obtain the failure rate of major parts according to operating temperature using MIL-HDBK-217F. Finally, the failure rate and the mean time between failures (MTBF) of the converter are predicted by reflecting the part failure rate to the basic event of the fault-tree.

• Journal of Advanced Navigation Technology
• /
• v.28 no.2
• /
• pp.216-224
• /
• 2024

This paper presents a method for analyzing the reliability of hardware electronic equipment, taking into account failures caused by radiation. Traditional reliability analysis primarily focuses on the wear out failure rate and often neglects the impact of radiation failure rates. We calculate the wear out failure rate through physics of failure analysis, while the radiation failure rate is semi-empirically estimated using the Verilog Fault Injection tool. Our approach aims to ensure reliability early in the development process, potentially reducing development time and costs by identifying circuit vulnerabilities in advance. As an illustrative example, we conducted a reliability analysis on the ISCAS85 circuit. Our results demonstrate the effectiveness of our method compared to traditional reliability analysis tools. This thorough analysis is crucial for ensuring the reliability of FPGAs in environments with high radiation exposure, such as in aviation and space applications.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.366-368
• /
• 2007

In this paper, the Time-varying Failure Rate (TFR) of power distribution system equipment is extracted from the recorded failure data of Korea Electric Power Corporation (KEPCO). For TFR extraction, it is used that the fault data accumulated by KEPCO during 10 years. The TFR is approximated to bathtub curve using the exponential (random failure) and Weibull (aging failure) distribution function. In addition, Kaplan-Meier estimation is applied to TFR extraction because of incomplete failure data of KEPCO. Finally, Probability plot and regression analysis is applied. It is presented that the extracted TFR is more effective and useful than Mean Failure Rate (MFR) through the comparison between TFR and MFR.

• Journal of Korean Institute of Industrial Engineers
• /
• v.26 no.2
• /
• pp.128-135
• /
• 2000

This paper considers a consecutive k-out-of-n:F system when the failure of a component in the system induces higher failure rate of the preceding survivor. The reliability, mean time to failure(MTTF), and average failure number of a consecutive k-out-of-n:F system are obtained, when the failure of a component increases the failure rate of the survivor which is working just before the failed component. Then the optimal number of consecutive failed components to minimize this long run average cost rate can be obtained. An example is considered to calculate the reliability, MTTF and average failure number of the system. And two procedures that find the optimal number of consecutive failed components are studied. Then, various cases of system parameters are also studied.

• Journal of the Korean Data and Information Science Society
• /
• v.14 no.2
• /
• pp.393-403
• /
• 2003

In this paper, various replacement policies for the general failure model are considered. There are two types of failure in the general failure model. One is Type I failure (minor failure) which can be removed by a minimal repair and the other is Type II failure (catastrophic failure) which can be removed only by a complete repair. In this model, when the unit fails at its age t, Type I failure occurs with probability 1-p(t) and Type II failure occurs with probability p(t), $0{\leq}p(t){\leq}1$. Under the model, optimal replacement policies for the long-run average cost rate and the limiting efficiency are considered. Also taking the cost and the efficiency into consideration at the same time, the properties of the optimal policies under the Cost-Priority-Criterion and the Efficiency-Priority-Criterion are obtained.

• Journal of Korean Institute of Industrial Engineers
• /
• v.33 no.1
• /
• pp.70-75
• /
• 2007

This paper discusses condition based preventive replacement for deteriorating systems. The system continuouslydeteriorates in time and fails at any deterioration level which is always monitored, It is replaced at failure or atsome deteriorated level preventively before failure. The deterioration process is represented by a Weibulldistribution with a time-linear scale parameter. The cost rate function is formed considering replacement costand opportunity loss cost and deterioration dependent failure distribution, If the system has an increasingdeterioration dependent failure rate, the optimal deterioration level for preventive replacement can be determinedfrom minimizing the cost rate. An illustrative example is given for a Weibull deterioration dependent failuredistribution.

• Journal of Korean Society for Quality Management
• /
• v.25 no.3
• /
• pp.96-107
• /
• 1997

The recent stream to reliability prediction is that it is totally inclusive in depth to consider even the operating and environmental condition at the level of finished goods as well as component itselves. In this study, firstly we present the reliability prediction methods by entire failure rate model which failure rate at the system level is added to the failure rate model at the component level. Secondly we build up the improved bases of reliability demonstration through a, pp.ication of Kaplan-Meier, Cumulative hazard, Johnson's methods as non-parametric and Maximum Likelihood Estimator under exponential & Weibull distribution as parametric. And also present the methods of curve fitting to piecewise failure rate under Weibull distribution, PRST (Probability Ratio Sequential Test), curve fitting to S-shaped reliability growth curve, computer programs of each methods. Lastly we show the practical for determination of optimal burn-in time as a method of reliability enhancement, and also verify the practical usefulness of the above study through the a, pp.ication of failure and test data during 1 year.

• 한국연소학회:학술대회논문집
• /
• 2012.11a
• /
• pp.89-91
• /
• 2012

The numerical simulation for detonation failure of ammonium nitrate (AN) based non-ideal explosives is carried out with an accurate and state-of-the-art Eulerian method. Detonation failure is readily observed in the rate stick experiments utilizing the AN mixture explosives and the inert confinements of varying thicknesses. The composition of non-ideal explosives and thickness of the confinements influence the characteristics of detonation failure. Calculated results are compared against the experimental data of both unconfined and confined rate stick problems and provide a reliable guideline to establish a fine-tuned chemical kinetic model for detonation failure.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2845-2849
• /
• 2008

Long Term Asset Management(LTAM) means a plan developed by using LCM(Life Cycle Management) process for optimum life cycle management of significant plant assets at each plant across the fleet. As a part of development of LTAM Strategies on nuclear turbines, a method so as to determine the future failure rates for low pressure turbine facilities at a nuclear plant was studied and developed by using both plant specific and industry-wide performance data. INPO's EPIX data were analyzed and some failure rate evaluation values considering preventive maintenance practices were calculated by using EPRI's PM Basis software. As the result, failure rate functions applicable to a priori and a posteriori replacement of low pressure turbines at a nuclear plant were developed and utilized in an assessment of economics of LCM alternatives on the nuclear turbine facilities in the respects of 40-year and 60-year operation bases.