• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.774-780
• /
• 1999

The study of bond behavior between concrete and rebar has been performed for a long time. On this study, we tried to analysed variation of bond behaviors quantitatively with varying the strength of concrete. Bond stress which observed below the neutral surface of beam and at connecting part of beam and column is affected by various bond parameters. Resistance of deformed bars which embedded in concrete to the pullout force is divided 1) chemical adhesive force 2) frictional force 3) mechanical resistance of ribs to the concrete and these horizontal components of resistance is being bond strength. We selected the most common and typical variable which is concrete strength among various variables. So we used two kinds of concrete strength like as 25MPa(NSC) and 65MPa(HSC). Tension Test was performed to verify how bond behavior varied with two kinds of concrete strength. Concentration of bond stress was observed at load-end commonly in Tension Test of the initial load stage. At this stage stress distribution was almost coincident at each strength. As tension load added, this stress distribution had difference gradually and movement of pick point of bond stress to free-end and central section was observed. This tendency was observed at first and moving speed was more fast in NSC. At the preceeding result the reason of this phenomenon is considered to discretion of chemical adhesion and local failure of concrete around rebar in load-end direction. Especially, when concrete strength was increased 2.6 times in tension test, ultimate bond strength was increased 1.45 times. In most recent used building codes, bond strength is proportioned to sqare root of concrete compressive strength but comparison of normalized ultimate bond strength was considered that the higher concrete strength is, the lower safety factor of bond strength is in each strength if we use existing building codes. In Tension Test, in case of initial tensile force state, steel tensile stress of central cross section is not different greatly at each strength but tensile force increasing, that of central cross section in NSC was increased remarkably. Namely, tensile force which was shared in concrete in HSC was far greater than that of concrete in NSC at central section.

• Journal of the Korea Concrete Institute
• /
• v.28 no.2
• /
• pp.167-176
• /
• 2016

Shear friction strength model of concrete was proposed to explain the direct friction mechanism at the concrete interfaces intersecting two structural elements. The model was derived from a mechanism analysis based on the upper-bound theorem of concrete plasticity considering the effect of transverse reinforcement and applied axial loads on the shear strength at concrete interfaces. Concrete was modelled as a rigid-perfectly plastic material obeying modified Coulomb failure criteria. To allow the influence of concrete type and maximum aggregate size on the effectiveness strength of concrete, the stress-strain models proposed by Yang et al. and Hordijk were employed in compression and tension, respectively. From the conversion of these stress-strain models into rigidly perfect materials, the effectiveness factor for compression, ratio of effective tensile strength to compressive strength and angle of concrete friction were then mathematically generalized. The proposed shear friction strength model was compared with 91 push-off specimens compiled from the available literature. Unlike the existing equations or code equations, the proposed model possessed an application of diversity against various parameters. As a result, the mean and standard deviation of the ratios between experiments and predictions using the present model are 0.95 and 0.15, respectively, indicating a better accuracy and less variation than the other equations, regardless of concrete type, the amount of transverse reinforcement, and the magnitude of applied axial stresses.

• Archives of Craniofacial Surgery
• /
• v.21 no.4
• /
• pp.229-236
• /
• 2020

Background: Oncologic resection of the scalp confers several obstacles to the reconstructive surgeon dependent upon patient-specific and wound-specific factors. We aim to describe our experiences with various reconstructive methods, and delineate risk factors for coverage failure and complications in the setting of scalp reconstruction. Methods: A retrospective chart review was conducted, examining patients who underwent resection of fungating scalp tumors with subsequent soft-tissue reconstruction from 2003 to 2019. Patient demographics, wound and oncologic characteristics, treatment modalities, and outcomes were recorded and analyzed. Results: A total of 189 patients were appropriate for inclusion, undergoing a range of reconstructive methods from skin grafting to free flaps. Thirty-three patients (17.5%) underwent preoperative radiation. In all, 48 patients (25.4%) suffered wound site complications, 25 (13.2%) underwent reoperation, and 47 (24.9%) suffered from mortality. Preoperative radiation therapy was an independent risk factor for wound complications (odds ratio [OR], 2.85; 95% confidence interval [CI], 1.1-7.3; p=0.028) and reoperations (OR, 4.45; 95% CI, 1.5-13.2; p=0.007). Similarly, the presence of an underlying titanium mesh was an independent predictor of wound complications (OR, 2.49; 95% CI, 1.1-5.6; p=0.029) and reoperations (OR, 3.40; 95% CI, 1.2-9.7; p=0.020). Both immunosuppressed status (OR, 2.88; 95% CI, 1.2-7.1; p=0.021) and preoperative radiation therapy (OR, 3.34; 95% CI, 1.2-9.7; p=0.022) were risk factors for mortality. Conclusion: Both preoperative radiation and the presence of underlying titanium mesh are independent risk factors for wound site complications and increased reoperation rates following oncologic resection and reconstruction of the scalp. Additionally, preoperative radiation, along with an immunosuppressed state, may predict patient mortality following scalp resection and reconstruction.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.1
• /
• pp.91-101
• /
• 2009

The factors of uncertainty such as work delay could cause many problems, for example, increase of construction cost and terms of work, and the deterioration of quality. Because of these, the uncertainty risk is regarded as an important management factor to obtain the success of construction project. So, the systematic management plan about the uncertainty factors is needed because it plays an important role in the completion of entire project. And also analysis of some factors which can cause the work delay can be one way of improving construction project's certainty and making it competitive. In this reason, we have to make an effort to set a priority based on analysis of quantitatively numerical value about work delay factors to manage them effectively. Thus, this study aims to suggest the basic data for the effective management and prevention of work delay in steel-frame work which is progressive actively now, along with increasing of demand of high-rise buildings by analyzing each reasons of work delay factors and also by suggesting important management factors that are coded according to each construction work using FMEA method which could give a data about the importance of work delay factors through quantitatively numerical value.

• Journal of Korean Academy of Nursing
• /
• v.2 no.1
• /
• pp.35-47
• /
• 1971

This is a research on general evaluation of the nursing profession which is a professional job, a suitable calling to women and is developing academically day by day. The author gave some questions to the patients, doctors, people, student nurses-themselves and got the following results; (A) General concept about nursing profession A nurse is a member, of a medical team who works for people′s health promotion(50.8%). The reason that the nursing profession is a good one is that it is a rewarding job to care for sick patients(78.9%). The spirit is the most important factor for the nurse(84.8%) and the nursing profession is a suitable calling to women (76%). The description of nurses as "The angels in white dress" is an appropriate one (44.6%) or only a beautiful expression(47.4%) (B) Nurses as actually seen by doctors and patients. They work only obligatorily (47.8%)-Doctors They try to relieve, the patient′s physical discomforts in all sincerity (65.6%), also they to decrease the patient′s mental apprehension (56.7%). (C) Satisfaction in the nursing profession. Nurses satisfaction in the nursing profession is general(68.8%) and student nurses satisfaction in selecting nursing is fulfilled (50.9%). One reason for dissatisfaction among nurses and student nurses is people's failure to understanding the nursing profession(40.1%), One reason for satisfaction is that it is a rewarding job caring for sick patients(35%). (D) Is the nursing professional job? People think the nursing profession is a professional job like doctors or lawyers (60.2%). (E) Are they academic? People think the nurses are academic(37.8%) but nurses read only interesting items in the "Journal of Korean Nurse"(67.7%). (F) Opinions about nurses′going out of the country. Doctors and nurses agree that after 1-2 years′experience in this country(78.5%) and student nurses want to go out where there is on opportunity(73.1%). Student's purpose of going out is to enrich their stock of information(71.3%), doctors think, it is for training in nursing knowledge and skills (47.8%). (G) Opinions about nurse′s social affairs. They want nurses to be controlled(44.4%) and also think that the nurse's demonstration in the National Conte. was reasonable (36.3%). (H) Would you make your daughter a nurse? They favour their daughter′s becoming a nurse(17.4%) because they think it is a rewarding job to care for sick patients(42.5%).

• Journal of Agricultural Extension & Community Development
• /
• v.20 no.2
• /
• pp.407-429
• /
• 2013

Although rural areas account for more than 80% of the total land area of South Korea, most of them are deteriorated and living environment is inconvenient. In addition, the migration of young generation to urban areas and ageing have reduced the population and caused not only cavitation phenomena of villages but also stagnant communities. As for one of the rural areas, the seat of Myeon Office located in Oesan-myeon, Buyeo-gun, Chungcheongnam-do, this study presented not a plan only for strengthening hub functions but the methodology of the complex development plan in consideration of the regional characteristics in the comprehensive improvement project in seat of Myeon Office. From the perspective of enhancing the function of the seat of Myeon Office, it is inevitable to establish plans based on hardware. However, empowerment of the residents in the targeted areas also works as an important factor. In other words, each project promoted by the plan will be mainly operated by the local residents. Therefore, it is necessary to establish a management system of this. The success or failure of the established plan is based on the accurate survey of the issues of the targeted areas and demand, and this depends on participation and positive response of the residents of the targeted areas. That is, the method as a 'local community network' is required in order to increase the effect of resident participation in the planning area.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.1
• /
• pp.68-78
• /
• 2013

In this paper, we propose an early spectrum sensing(ESS) as an advance preparation for radio-access trial, which enables multi-mode terminals to access the most appropriate radio-access system in a cloud-conceptual base station system where multiple radio access technologies(RATs) coexist. Prior to a random access to one of RATs, a multi-mode terminal conducts a spectrum sensing over entire frequency bands of whole RATs, then select the RAT with the lowest sensing power, that is likely to have the most available spectrum. Thus, an access failure caused by that the selected RAT has no available radio spectrum could be avoidable in advance. In computer simulation, we consider as various RATs as possible. First, circuit and packet systems are taken into consideration. In addition, the packet systems are classified according to the feasibility of carrier aggregation(CA). In case of terminal, three modes are considered with circuit-only, packet-only, and multi-mode. Subsequently, packet traffic is classified into real-time and non-real-time traffic with three different tolerable delay levels. The simulation includes a call process starting with a call generation and ending up with a resource allocation reflecting individual user's QoS requirements and evaluates the proposed scheme in terms of the successful access probability, system access time, system balancing factor and packet loss probability.

• Industry Promotion Research
• /
• v.5 no.1
• /
• pp.47-52
• /
• 2020

In this study, parallel work-learning training, which was started in 2013 as a pre-employment promotion policy, is an important factor that determines the success or failure of training. As a time when various institutional supplementation is needed to encourage company participation, this study is to identify the factors of participation of companies participating in work-learning parallel. To this end, a questionnaire survey was conducted of companies participating in parallel work-learning in Chungnam, and the results were analyzed using the structural equation model. As a result of the study, the reason for the company's participation in parallel work-learning was firstly, 84% of government subsidy received education and training expenses. Second, 66% of workers were able to pay less than regular workers, and thirdly, it was easy to hire new employees in the field. 26%, 17% of them were invited by acquaintances for no particular reason. Therefore, the study suggests that participation in the work-learning parallel training contributes to the management costs, management of employee turnover, and human resource development. In future research, it is necessary to subdivide tests and estimates by conducting studies on regions, occupations, gender, wages, and years of service in Korea.

• Biomolecules & Therapeutics
• /
• v.26 no.3
• /
• pp.298-305
• /
• 2018

Rhomboid family member 2 gene (Rhbdf2) is an inactive homologue lacking essential catalytic residues of rhomboid intramembrane serine proteases. The protein is necessary for maturation of tumor necrosis factor-alpha ($TNF-{\alpha}$) converting enzyme, which is the molecule responsible for the release of $TNF-{\alpha}$. In this study, Rhbdf2 knockout (KO) mice were produced by CRISPR/CAS9. To see the effects of the failure of $TNF-{\alpha}$ release induced by Rhbdf2 gene KO, collagen-induced arthritis (CIA), which is the representative $TNF-{\alpha}$ related disease, was induced in the Rhbdf2 mutant mouse using chicken collagen type II. The severity of the CIA was measured by traditional clinical scores and histopathological analysis of hind limb joints. A rota-rod test and grip strength test were employed to evaluate the severity of CIA based on losses of physical functions. The results indicated that Rhbdf2 mutant mice showed clear alleviation of the clinical severity of CIA as demonstrated by the significantly lower severity indexes. Moreover, a grip strength test was shown to be useful for the evaluation of physical functional losses by CIA. Overall, the results showed that the Rhbdf2 gene has a significant effect on the induction of CIA, which is related to $TNF-{\alpha}$.

• Information Systems Review
• /
• v.11 no.2
• /
• pp.45-66
• /
• 2009

A number of companies are considering for merger and acquisition (M&A) as one of business strategies for their growth and survival. However, many of them do not create the synergy they had sought, and failed M&A, often result in negative outcomes in terms of productivity, market share, profitability and turnover of qualified employees. There have been numerous research studies conducted to analyze the factors that determine the success and failure of M&A, and it has been found that with the increasing dependence of many companies on information systems, post-M&A IS (information systems) integration success has a critical effect on the success of M&A. However, there have been very few studies on post-M&A IS integration success, and most have been restricted to integration of IS organizations or physical information systems. In order to conduct a comprehensive research on the factors that affect the success of post-M&A IS integration, this study surveyed preceding researches on not only information systems but also strategic management, economics, finance, HRM (human resource management) and organization management. Based on the findings, a comprehensive and integrated model of the influential factors on post-M&A IS integration has been proposed. The proposed model categorizes the factors into perspectives of M&A, strategy, organization, HRM and IS, and provides an empirical evaluation of each factor on the success of IS integration based on comparative case studies.