• 제목/요약/키워드: failure detection equipment

검색결과 79건 처리시간 0.026초

퍼지규칙을 이용한 AED 시스템 (AED System using Fuzzy Rules)

  • 이희택;홍유식;이상석
    • 한국인터넷방송통신학회논문지
    • /
    • 제13권4호
    • /
    • pp.215-220
    • /
    • 2013
  • 최근 심장마비로 사망한 사례가 전 세계적으로 급속도로 늘고 있다. 그러므로 이러한 문제점을 개선하기 위해서, 공항, 학교, 가정에서에도 자동제세동기 설치가 의무화 되었고 AED 설치를 의무화 하고 있는 추세이다. 그러나, AED는 응급상황에서 사용 시 오작동이나 장비의 고장이 생긴 경우 AED가 비치되어 있어도 무용지물이 될 수 있다. 본 논문에서는, 이러한 문제점을 개선하기위해서, AED Simulator를 이용한 퍼지기법 시뮬레이션은 기존의 방법과 비교해서 외부 온도 조건 및 Tilt 조건을 고려 해서, 자가 진단시에 이상 검출 유무를 판단하는 지능형 모의 실험을 개발하였다. 모의실험 결과, 기존의 방법보다 고장 검출 확률이 30 % 정도 개선되는 것을 확인하였다.

무기체계 정비성 향상을 위한 BIT 설계 및 검증 방안 (Improvements in Design and Evaluation of Built-In-Test System)

  • 허완욱;박은심;윤정환
    • 한국군사과학기술학회지
    • /
    • 제15권2호
    • /
    • pp.111-120
    • /
    • 2012
  • Built-In-Test is a design feature in more and more advanced weapon system. During development test and evaluation(DT&E) it is critical that the BIT system be evaluated. The BIT system is an integral part of the weapon system and subsystem. Built-In-Test assists in conducting on system and subsystem failure detection and isolation to the Line Replaceable Unit(LRU). This capability reduces the need for highly skilled personnel and special test equipment at organizational level, and reduces maintenance down-time of system by shortening Total Corrective Maintenance Time. During DT&E of weapon system the objective of BIT system evaluation is to determine BIT capabilities achieved and to identify deficiencies in the BIT system. As a result corrective actions are implemented while the system is still in development. Through the use of the reiterative BIT evaluation the BIT system design was corrected, improved, or updated, as the BIT system matured.

딥러닝(CNN)기반 저해상도 IR이미지 분석을 통한 작업자 인식 (Deep Learning(CNN) based Worker Detection on Infrared Radiation Image Analysis)

  • 오원식;이우귀연;오정석
    • 한국가스학회지
    • /
    • 제22권6호
    • /
    • pp.8-15
    • /
    • 2018
  • 플랜트 내 위험지역의 안전을 위해 작업자 중심의 안전관리가 필요하다. 최근 5년간 가스 사고의 원인은 시설 노후 및 장비고장 뿐만 아니라, 사용자의 취급부주의나 고의사고, 공급자 취급부주의 등 작업자의 행동에 밀접한 관련이 있다. 이와 같은 사고를 미연에 방지하기 위해서, 플랜트 내 위험지역에 대한 실시간 모니터링이 필요로 하다. 하지만 실시간 모니터링을 위해서 작업(근로)공간에 카메라 설치 시, 인권침해와 같은 문제가 발생한다. 이를 방지하기 위해서 작업자의 신원 노출이 적은 저해상도의 Infrared 카메라를 이용한다. 또한 실시간 모니터링 시, 사람이 아닌 CNN알고리즘을 이용하여 이미지 분석을 통하여 인권침해 문제를 예방한다.

오토인코더를 활용한 MCT 이상탐지 알고리즘 개발 (Autoencoder-based MCT Anomaly Detection Algorithm)

  • 김민희;진교홍
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2021년도 추계학술대회
    • /
    • pp.89-92
    • /
    • 2021
  • 제조 현장에서 설비의 이상이나 고장은 곧 제품의 결함을 발생시키는 요인이 된다. 최근 스마트팩토리 서비스의 확산에 따라 고장을 예측 및 방지를 위한 인공지능 기반의 애플리케이션에 대한 연구가 활발히 이어지고 있으나, 일반적으로 설비의 이상이나 고장 데이터는 정상에 비해 그 개수가 현저히 적어 분류 모델 개발에 큰 어려움이 있다. 본 논문에서는 오토인코더 모델의 입력과 출력 간 차이를 이용한 제조 현장의 MCT 이상탐지 알고리즘을 제안하고 성능을 분석하였다. 해당 알고리즘은 비정상 데이터가 존재하지 않는 MCT 제조 데이터에서 정상 데이터에 대한 특징만을 이용하여 비정상을 탐지한다.

  • PDF

전계센서의 원리를 이용한 공기중 부분방전신호 검출 (PD Detection in Air by Capacitive Electric Field Sensor)

  • 이용희;이강원;박성희;강성화;신양섭;임기조
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
    • /
    • pp.900-903
    • /
    • 2002
  • Partial discharges(PD) in air, corona discharges, deteriorate the insulation strength. So, it is necessary to detect PD at an early stage before the system failure and extensive damage to the equipment. PD emit signals which can be detected by applying an capacitive electric field diagnosis. In this paper, We measured signals by capacitive electric field sensor and analyzed FFT from PD, and then compared conventional electric PD detecting method to capacitive electric field diagnosis by $\Psi-q-n$, $\Psi-v-n$, $\Psi-n$, $\Psi-q$ distributions.

  • PDF

중성자 신호이용 원자로 내부 구조물 감시시스템 구성 (Composition of Diagnostic System for Reactor Internal Structures Using Neutron Noise)

  • 박종범;김종봉;박진호
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 하계학술대회 논문집 D
    • /
    • pp.2252-2254
    • /
    • 2002
  • The Reactor internal structures which consist of many complex components are subjected to flow-induced vibration due to high temperature and pressure in Reactor coolant system. The above flow-induced vibration causes degradation of structural integrity of the Reactor and may result in loosing mechanical binding component which might impact other equipment and component or cause flow blockage. It is important to analyze reactor noise signal for the early detection of potential problem or failure in order to diagnosis reactor integrity in the point of view of safety and plant economics. Detailed composition of diagnostic system reactor internal structures using neutron noise(RIDS).

  • PDF

중성자 신호이용 원자로 내부 구조물 감시시스템 하드웨어 설계 (Design of Hardward Diagnostic System for Reactor Internal Structures Using Neutron Noise)

  • 박종범;박진호;황충환;김수홍
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 하계학술대회 논문집 D
    • /
    • pp.2166-2168
    • /
    • 2001
  • Reactor Noise is defined as the fluctuations of measured instrumentation signals during full-power operation of reactor which have informations on reactor system dynamics such as neutron kinetics. The Reactor internal structures which consist of many complex components are subjected to flow-induced vibration due to high temperature and pressure in reactor coolant system. The above flow-induced vibration causes degradation of structural integrity of the reactor and may result in loosing mechanical binding component which might impact other equipment and component or cause flow blockage. It is important to analyze reactor noise signal for the early detection of potential problem or failure in order to diagnosis reactor integrity in the point of view of safety and plant economics. Detailed design of hardware diagnostic system reactor internal structures using neutron noise(RIDS).

  • PDF

자동차 고장예지시스템의 기술동향 연구 (Investigation of Technological Trends in Automotive Fault Prognostic System)

  • 알지안티 이스마일;정원
    • 산업경영시스템학회지
    • /
    • 제36권1호
    • /
    • pp.78-85
    • /
    • 2013
  • Since the basic built-in-test, prognostic health management (PHM) has evolved into more sophisticated and complex systems with advanced warning and failure detection devices. Aerospace and military systems, manufacturing equipment, structural monitoring, automotive electronic systems and telecommunication systems are examples of fields in which PHM has been fully utilized. Nowadays, the automotive electronic system has become more sophisticated and increasingly dependent on accurate sensors and reliable microprocessors to perform vehicle control functions which help to detect faults and to predict the remaining useful life of automotive parts. As the complication of automotive system increases, the need for intelligent PHM becomes more significant. Given enormous potential to be developed lays ahead, this paper presents findings and discussions on the trends of automotive PHM research with the expectation to offer opportunity for further improving the current technologies and methods to be applied into more advanced applications.

사후 서비스에서 선제적 서비스로 서비스 패러다임의 전환 (Transition of Service Paradigm from Service Recovery to Proactive Service)

  • 이현정;김향미;이창섭
    • 한국콘텐츠학회논문지
    • /
    • 제20권4호
    • /
    • pp.396-405
    • /
    • 2020
  • 본 연구에서는 초고속인터넷 상품에 관련된 고객 불만사항(VOC, Voice of Customer)의 빅데이터를 활용하여 고객이 지각하는 품질이상의 원인과 선제적 서비스의 가능성을 살펴보았다. 선제적 서비스의 가능성을 검증하기 위해 실제 이동통신 서비스기업의 시설·장비의 총 13개 장애경보에 관련된 품질이상 VOC를 수집한 후, 𝒙2검증을 통해 품질이상 VOC 실제관측값과 기대값이 통계적으로 유의한 차이가 있는 지 검증하였다. 연구결과, 시설·장비의 총 13개 장애경보 관련 품질이상 VOC 중 6개의 장애경보로서, 'FTTH-R 장비 ON/OFF', 'FTTH-E,V 회선오류 감지', '포트불량, FTTH-R 회선오류 감지', '네트워크 LOOP 감지', 그리고 '비정상 트래픽 제한'은 실시간 모니터링을 통한 선제적 서비스가 가능하다는 통계적 근거를 찾았다. 기업들은 이러한 선제적 서비스를 이용하여 시잠점유율을 향상키시고 고객서비스 비용을 절감하는 데 적용할 수 있을 것이다. 본 연구의 결과는 통신서비스 분야의 선제적 서비스의 가능성을 진단하고, 나아가 효과적인 선제적 서비스 제공 방안에 대한 시사점을 제시하였다는 점에서 실제 산업 적용에 대한 공헌점이 기대된다.

정맥 검출 장비 구현 및 영상처리 알고리즘 개발에 대한 연구 (A Study on the Implementation and Development of Image Processing Algorithms for Vibes Detection Equipment)

  • 정진형;조재현;장지훈;이상식
    • 한국정보전자통신기술학회논문지
    • /
    • 제15권6호
    • /
    • pp.463-470
    • /
    • 2022
  • 정맥주사는 환자의 치료를 위해 주사 약물, 수액, 비경구 영양, 혈액제제의 투입 등에 광법위하게 이용되고 있으며 입원 환자에게 가장 빈번하게 행해지는 침습적 처치로서, 채혈, 말초 카테터 삽입 및 기타 IV요법 등에 해당하며 연간 10억건 이상 발생하고 있다. 정맥주사는 정맥주사 교육을 받은 숙련된 간호사들에 의해서만 시술되는 어려운 시술 중에 하나이며 실패 시 정맥에 혈전증 및 혈종이나 신경손상 등을 초래할 수 있다. 정맥주사를 자주 시술하는 간호사들도 비만, 피부색, 나이 등의 요인으로 정맥 검출이 쉽지 않아 실수들이 발생하는 경우도 있다. 이에 정맥주사 시 실수를 줄이기 위해 손등이나 팔의 정맥 구조를 시각화할 수 있는 보조 장비들에 대한 연구들이 발표되고 있다. 본 논문은 정맥주사 시 정맥의 구조를 시각화하는 정맥검출 장비 개발에 관한 연구에 대한 내용으로서, 정맥검출을 위한 실험 모듈을 제작하고 각기 다른 파장대를 지닌 NIR(근적외선) LED와 Filter의 파장대 조합에 따른 획득 영상의 밝기 비교를 통해 최적의 조합을 선정하는 연구를 진행했다. 또한 구현한 정맥검출 실험 모듈을 통해 획득한 정맥 영상의 선명화를 위해 그레이스케일 변환, 히스토그램 평활화, 샤프닝 필터 적용하고 이진화 이후 마킹을 통해 혈관 부분을 녹색으로 변환하는 영상처리 알고리즘을 도출하였다.