• Journal of Nutrition and Health
• /
• v.44 no.1
• /
• pp.74-81
• /
• 2011

The purpose of this study was to investigate the sanitation management of school foodstuffs and the sanitation knowledge of delivery company workers. A questionnaire that identified employee's food safety sanitation management, knowledge, and practices was developed based on a review of the literature. The subjects consisted of 201 delivery company workers from 38 delivery companies in the Daegu and Gyeongbuk area. The workers were 30-39 years of age (41.3%) with 1-3 years of working experience (30.8%). Approximately 62% of the respondents were educated and had 1-2 years of food safety experience, 52.7% of the respondents delivered foodstuffs to two schools in the morning. The total score for delivery company worker sanitation knowledge was 3.75/7.00, which was low. The total mean sanitary performance score for factory workers was 4.58/5.00. They indicated that the most difficult part of the operation is delivering on time. Temperature management was another difficulty. In order to secure the best quality of school food to be supplied safely, the thorough sanitation education must be conducted to the school dieticians and delivery company managers.

• Journal of Nutrition and Health
• /
• v.2 no.4
• /
• pp.143-153
• /
• 1969

For the purpose of the better dietary management and to emphasize of importance in nutrition education for 949 woman workers at the dormitory of wig factory in Seoul, the nutritional survey was conducted for seven days from August 13 th to 20 th of 1969. The survey included food and nutrient intakes, physical measurement, clinical findings and biochemical measurement were conducted for the randomly sampled 44 subjects. According to the survey results, their heights was under the standard and the 82% of the total subjects was the age ranges from 16 years to 20 years old. Their daily menu was not planned properly and the concept of 5 basic food groups was not utilized in their menu planning. The balanced meal should be emphasized in this factory. Calories and protein intakes are low compared with the recommended allowance and especially animal protein intake is low. Fat intake is only 8.8 grams for capita per day. Vitamins and minerals intake are also low. Clinical and biochemical survey indicated various vitamin deficiencies and anemia which is mostly due to the iron insufficiency.

• Journal of Computational Design and Engineering
• /
• v.1 no.2
• /
• pp.140-151
• /
• 2014

Storing, and the loading and unloading of materials at production sites in the manufacturing sector for mass production is a critical problem that affects various aspects: the layout of the factory, line-side space, logistics, workers' work paths and ease of work, automatic procurement of components, and transfer and supply. Traditionally, the nesting problem has been an issue to improve the efficiency of raw materials; further, research into mainly 2D optimization has progressed. Also, recently, research into the expanded usage of 3D models to implement packing optimization has been actively carried out. Nevertheless, packing algorithms using 3D models are not widely used in practice, due to the large decrease in efficiency, owing to the complexity and excessive computational time. In this paper, the problem of efficiently loading and unloading freeform 3D objects into a given container has been solved, by considering the 3D form, ease of loading and unloading, and packing density. For this reason, a Group Packing Approach for workers has been developed, by using analyzed truck packing work patterns and Group Technology, which is to enhance the efficiency of storage in the manufacturing sector. Also, an algorithm for 3D packing has been developed, and implemented in a commercial 3D CAD modeling system. The 3D packing method consists of a grouping algorithm, a sequencing algorithm, an orientating algorithm, and a loading algorithm. These algorithms concern the respective aspects: the packing order, orientation decisions of parts, collision checking among parts and processing, position decisions of parts, efficiency verification, and loading and unloading simulation. Storage optimization and examination of the ease of loading and unloading are possible, and various kinds of engineering analysis, such as work performance analysis, are facilitated through the intelligent 3D packing method developed in this paper, by using the results of the 3D model.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.1_2
• /
• pp.44-51
• /
• 2006

In this paper, we present a network-based integrated nesting system, that is adapted a current engineering concept. Generally, sheet cutting processes proceed in turn following an existing order In this study, however, the special characteristics of these processes were analyzed and the processes were redesigned with distributed design so that they could be operated in a client/server environment. Also, the necessary sheet material cutting processes, part CAD, nesting, part CAM, and NC post-processor capabilities, were implemented so that many workers could handle them all on the Web. Compared to existing commonly used systems, the developed system can provide integrated work environment for cutting automation, allow job collaboration between workers, and it has proved that it can shorten the standby time for work. By grafting computer system technologies to sheet material cutting automation field, this research expects to contribute to the enhancement of factory automation efficiency and productivity.

• Analytical Science and Technology
• /
• v.27 no.6
• /
• pp.333-338
• /
• 2014

A simple and sensitive analytical method for fluoride in urine by ion selective electrode (ISE) method was presented. Traditional buffer for fluoride determination using ISE is acetate-based one. Researchers have pointed out some drawbacks of the buffer for fluoride ISE analysis, and some other buffers including citrate-ammonium buffer and MES buffer have been studied for accurate determination of fluoride in urine here. These buffers provided promising results in environmental field, and this author focused on overcoming the interference of co-existing aluminium. The results show that MES-CyDTA buffer gave the best recovery with accuracy of 95-97.5% and precision of 1.9-7.9% for reference sample of 1.8-7.8 mg/L fluoride in urine, with smaller amount of samples and shorter analysis time compared with the traditional method which used acetate buffer. The method was applied to field samples, and which showed urinary of $0.98{\pm}0.38mg/g$ creatinine for workers in electric cable manufacturing factory (n=15) and $0.59{\pm}0.30mg/g$ creatinine for non-exposed workers (n=12).

• Journal of Preventive Medicine and Public Health
• /
• v.32 no.3
• /
• pp.421-426
• /
• 1999

Objectives: An outbreak of dermatosis occurred at a city gas manufacturing factory in Pohang in Aug, 1998. The authors conducted a study to find the cause and prevent the dermatosis, Methods: We conducted a questionnaire survey of 73 workers in the factory twice, once or Aug. 14th and then Sept. 11th, 1998. Also, a dermatologist examined their skin lesions. We suspected ants as the cause, so we collected them for identification. Results: Twelve cases of dermatosis were identified with an attack rate of 16.4%. The attack rates were not different by age, educational level or tenures. The attack rates were 66.6% among production workers, 2.0% among clerical workers, 16.7% among tank trailer drivers and 0% among guards. The attack rate among production workers was significantly higher than that of the others (<0.01). There were no histories of the same dermatosis for the past one year. Histories of other skin diseases and allergies were very rare in both cases with skin diseases and control. Multiple, pruritic, rice-grained to bean sized erythemafous macules or papules with a central biting point could be found after initial severe itching occurred, Three cases showed signs of dermatosis with an allergic nature. The onset of dermatosis was between July 30 and Aug 12 and the durations varied from 5 days to over a month. The most frequent sites of stir lesions were the chest and abdomen (60.6%), and they were also observed on the neck (33.3%), arms (33.3%), shoulders (16.7%) and back (16.7%). Over 10 ants with their wings were collected in the work place and identified as Pachycondyla chinensis, subfamily Ponerinae. Conclusions : We thought that the outbreak of dermatosis was brought about by the ants flying into the work place through the open windows. Further studies on the factors contributing to the prosperity of the ants in this area are needed.

• Industrial Engineering and Management Systems
• /
• v.11 no.2
• /
• pp.188-195
• /
• 2012

This paper presents a new mode of expressing a 3D assembly work for creating a 3D CG animation without judgment by human from minimal required information. In the field of manufacturing, there are favorable movements in the utilization of 3D CAD for 3D simulation to shorten lead time for product development and pre-production. But simulating an assembly work has troubles to need huge quantity of manually input data. This paper discusses what minimal necessary information for creating 3D CG animations of assembly works is, focusing on the features of assembly works. Furthermore, a new mode of expressing a 3D assembly work is proposed as "state/change transition diagrams" (SCTD), which express arbitrary scenes in an assembly work as "state" and describe a sequential assembly work with "state" and "change", and the outline of its stepwise generation algorithm is also described. SCTD can be converted to a 3D CG animation of an assembly work without judgment by human. This paper focuses on the creating 3D CG animation of assembly works which workers use only their both hands.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.2
• /
• pp.533-538
• /
• 2012

Background: Tobacco cessation would provide the most immediate benefits of tobacco control to prevent tobacco related disease morbidity and mortality. Methods: A tobacco cessation program involving individual and group behavior therapy was implemented in three stages at a worksite. Tobacco quit rates were assessed at the end of each contact session. Results: Out of the 291 tobacco users identified, 224 participated in the tobacco cessation interventions. At the end of three interventions, 38 (17%) users had successfully quit tobacco use. Presence of clinical oral pre-cancer lesion was found to be associated with quitting (p=0.02). Also tobacco users with oral pre-cancer lesions were around three times more likely to quit than those with no lesions (OR= 2.70 95% C.I= 1.20 - 6.05). Conclusion: Cost effective multi-pronged tobacco cessation approaches, inbuilt into other occupational health and welfare activities, are acceptable and feasible to achieve long term sustainable tobacco cessation programs at worksites.

• Korean Journal of Computational Design and Engineering
• /
• v.16 no.4
• /
• pp.260-267
• /
• 2011

Nowadays, automobile manufacturers are faced with increasing global competition which is required low cost as well as high quality. To reduce shipping and handling cost and delivery time, lots of automobile manufactures tried to build their new factory in the neighborhood of market. Simultaneously, many factories are under construction in developing countries to make efficient use of low-wage workers. However, because systems are installed in developing countries as the same type of domestic facilities, systems have lots of problems such as high installation cost and inefficient use of manpower. To find core problems and generate optimal solution of these problems, thinking process of TOC(Theory Of Constrains) is used. In case of transmission gear machining system, semi-auto system is proposed as the best solution to increase manpower efficiency and system utilization. Semi-auto system consists of automatic machining process and manual transporting process. The system layout is generated based on semi-auto process concept. And, 3D simulation method using QUEST is used to verify production volume of generated system.

• Journal of Preventive Medicine and Public Health
• /
• v.7 no.1
• /
• pp.197-201
• /
• 1974

The rapid economic development of Korea since 1960 has also brought a rapid urbanization process, and recently many rural areas have begun to show actual depopulation, in which particularly the young, productive and high educated groups are leaving for cities. More than 70% of migrators go to large cities such as Seoul, Pusan and Taegu. Their main motives for migration are to seek a job in urban areas. The study showed following results; The rate of migration a year was 1% of total population. Regarding the age of migrators belong to between 10-39 years old, especially migrator aged 10-29 years are comprised 87%. The educational level of migrators was a little higher than that of the residents. Considering the sibling order of migrators, the traditional value system for first son seemed to change. Concerning the place of destination, more than 70% of migrators moved to large cities such as Seoul. Pusan and Taegu. The main motivation of migration was to seek a job in urban areas. The occupation at the place of destination were factory workers, employee at company, students, salesmen, farmers and public officials in that order.