• Communications for Statistical Applications and Methods
• /
• 제28권3호
• /
• pp.233-250
• /
• 2021

This paper studies if the accuracies of mortality models (LC model vs. 4-parametric model) are aggravated if a mortality structure changes due to the impact of COVID-19. LC model (LCM) uses dimension reduction for fitting to the log mortality matrix so that the performance of the dimension reduction method may not be good when the matrix structure changes. On the other hand, 4-parametric factor model (4-PFM) is designed to use factors for fitting to log mortality data by age groups so that it would be less affected by the change of the mortality structure. In fact, the forecast accuracies of LCM are better than those of 4-PFM when life-tables are used whereas those of 4-PFM are better when the mortality structure changes. Thus this result shows that 4-PFM is more reliable in performance to the structural changes of the mortality. To support the accuracy changes of LCM the functional aspect is explained by computing eigenvalues produced by singular vector decomposition

• 한국정밀공학회지
• /
• 제11권2호
• /
• pp.189-196
• /
• 1994

Quality assurance in the process of manufacturing high strengh bolt sets used in the frictional joints of structures in one of important concern to users as well as to manufactures. In case of occurrences of either defective or low-quality products, even if they are quite rare, some systematic means of localizing the cause-characteristics and matching to corresponding production process is necessary. Control chart of torque factor is the primary indicatir in finding defectiveness of the products. Use of correlation diagrams ofnhardness of the bolt set presents in part a way of screening the cause. Retest data of the bolt set provide additional ideas of localizing the cause, for which theoretical background is presented in this regard. A process-characteristics matrix relating the causes of low quality to the corresponding process of manufacturing, which is of prime importance for the feedback control of production, is also proposed. Finally general features of control to assure quality of the set is described.

• 전자공학회논문지B
• /
• 제33B권3호
• /
• pp.9-16
• /
• 1996

LQ-servo is a robustness guaranteed multivariable controller design method based on the LQR structure to improve command following with output feedback. in this paper we introduce a weighting factor on the low frequency part of the state weighting matrix in the performance index in order to increase the low frequency gain of loop transfer function matrix T(s) in the loop shaping design method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.136-138
• /
• 2002

In this paper, we propose the analysis method of the Double Circuit Simultaneous Fault. To improve the accuracy and the promptness of the coontingency analysis, we reformed the Peterson method and extended the Sherman-Morrison equation. We also used the table of trigono -metric factor of Jacobian matrix before the fault, to compute the inverse matrix needed in the loadflow calculation.

• 대한전자공학회논문지
• /
• 제21권6호
• /
• pp.70-77
• /
• 1984

This paper represents a fast computational algorithm for the discrete sine transform defined by Kekre and Solanki. Techniques are developed to factor the discrete sine trans form matrix into M=log2 2N matrices, where the number(N) of sampled data points is a power of two. Each factorial matrix contains not more than two non-zero real elem tints in any row or column. As a result of this method, the exact a배orithm for the fast discrete sine transform is accomplished. The algorithm is illustiated by a signal flow graph, which may be readily translated to hardware or software implementation.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 1996년도 추계학술대회발표논문집; 고려대학교, 서울; 26 Oct. 1996
• /
• pp.289-292
• /
• 1996

In Cholesky factorization of the interior point method, dense columns of A matrix make dense Cholesky factor L regardless of sparsity of A matrix. We introduce a method to transform a primal problem to a dual problem in order to preserve the sparsity.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.40-43
• /
• 1999

Electrochemical surface treatment of PAN-based carbon fibers in acidic electrolyte has been studied in increasing the surface functional groups on fiber surfaces for the improvement of fiber-matrix adhesion of the resulting composites. According to the FT-IR and XPS measurements, it reveals that the oxygen functional groups on fibers are largely influence on the composite mechanical behaviors, whereas the nitrogen functional groups are not affected in the system. In this work, a good correlation between surface functionality and mechanical properties is established.

• BMB Reports
• /
• 제55권4호
• /
• pp.192-197
• /
• 2022

Cell signals for growth factors depend on the mechanical properties of the extracellular matrix (ECM) surrounding the cells. Microtubule acetylation is involved in the transforming growth factor (TGF)-β-induced myofibroblast differentiation in the soft ECM. However, the mechanism of activation of α-tubulin acetyltransferase 1 (α-TAT1), a major α-tubulin acetyltransferase, in the soft ECM is not well defined. Here, we found that casein kinase 2 (CK2) is required for the TGF-β-induced activation of α-TAT1 that promotes microtubule acetylation in the soft matrix. Genetic mutation and pharmacological inhibition of CK2 catalytic activity specifically reduced microtubule acetylation in the cells cultured on a soft matrix rather than those cultured on a stiff matrix. Immunoprecipitation analysis showed that CK2α, a catalytic subunit of CK2, directly bound to the C-terminal domain of α-TAT1, and this interaction was more prominent in the cells cultured on the soft matrix. Moreover, the substitution of alanine with serine, the 236th amino acid located at the C-terminus, which contains the CK2-binding site of α-TAT1, significantly abrogated the TGF-β-induced microtubule acetylation in the soft matrix, indicating that the successful binding of CK2 and the C-terminus of α-TAT1 led to the phosphorylation of serine at the 236th position of amino acids in α-TAT1 and regulation of its catalytic activity. Taken together, our findings provide novel insights into the molecular mechanisms underlying the TGF-β-induced activation of α-TAT1 in a soft matrix.

• 한국항공우주학회지
• /
• 제43권12호
• /
• pp.1079-1088
• /
• 2015

본 연구는 한국항공우주연구원에서 개발한 위성종합설계 SW 내의 복사계수 계산 프로그램의 병렬화 및 성능향상에 대해 논의한다. 복사계수는 복사열전달이 포함된 인공위성의 열해석을 수행하기 위한 필수적인 전초 단계로서 그 자체적인 계산량 또한 상당하다. 특히 위성 궤도상 시간에 따라 태양전지판과 본체의 상대변위가 변하기에 시간 별 독립적인 복사계수의 계산이 필요하다. 본 논문은 복사형상계수 병렬화 방법과 그 성능, KD-Tree 기반 차폐 탐색 알고리즘 및 태양전지판과 본체의 상대변위 변화에 따른 부분 복사형상계수 행렬 갱신이라고 지칭하는 계산량 저감 기법에 대해 논한다.

• 비파괴검사학회지
• /
• 제23권5호
• /
• pp.409-417
• /
• 2003

열경화성 수지 복합재료의 제조과정에서 제품의 품질과 생산성 향상에 필수적인 경화 모니터링 기술을 개발하였다 경화도를 분석하기 위해, 동일한 경화조건에서 유전기법에 의한 소산계수 측정결과와 시차 주사 열분석 방법에 의한 발열량 계측 결과를 비교하였으며, 계측 감도의 향상을 위해 센서부분과 계측선의 영향을 적절히 분리하는 방법을 사용하였다. 유리섬유/폴리에스터 복합재료와 유리섬유/에폭시 복합재료에 대하여 경화과정에서의 경화도 분석을 위한 새로운 경화 모니터링 방법으로 소산계수와 온도를 동시에 고려하였다. 이 때, 소산계수의 변화 경향은 수지 점도의 변화 양상과 비교하여 분석하였다 개발된 경화 모니터링 방법은 다양한 종류의 열경화성 복합재료 경화 모니터링에 사용될 수 있다.