• Journal of the Korea Safety Management & Science
• /
• v.25 no.2
• /
• pp.167-174
• /
• 2023

Currently, the budget for vocational competency development training has been expanded, but the number of participants has decreased. As the budget for the Vocational Competency Development Project increases, the participation of a large number of people becomes necessary. This study aims to derive factors that affect satisfaction by selecting factors related to respondent characteristics, training institutions, training types, and job performance for satisfaction with vocational competency development training, and to study ways to improve satisfaction. Data were collected through focus group interviews (FGI), and logistic regression analysis was conducted through feasibility review and reliability analysis. As a result, in the case of the model, it was confirmed that the degree of agreement between the case actually measured and the case predicted by the model was low in the Hosmer and Lemeshow test, but the overall classification accuracy was classified as 96.0% in the classification accuracy table. As for the influence of the factors, the result was derived that the application of knowledge technology, training institution facility equipment, Business Collaboration, long-term work plan, and satisfaction with work performed have an influence in the order.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.2
• /
• pp.248-257
• /
• 2014

As observed in the recent war, suppression of enemy air defense operation is one of the major tactics, simultaneously conducted with high payoff target. Specifically, our air defense operation should be properly constructed, since the operating environment of our forces mostly consists with mountainous terrain, which makes detections of the enemy difficult. The effective arrangements of low altitude air defense radars can be suggested as a way of improving the detection capability of our forces. In this paper, we consider the location problem of low altitude air defense radar, and formulate it as an Integer Programming. Specifically, we surveyed the previous researches on facility location problems and applied two particularly relevant models(MCLP, MEXCLP) to our problem. The terrain factor was represented as demand points in the models. We verified the optimal radar locations for operational situations through simulation model which depicts simple battle field. In the simulation model, the performance of optimal radar locations are measured by the enemy detection rate. With a series of experiments, we may conclude that when locating low altitude air defense radars, it is important to consider the detection probability of radar. We expect that this finding may be helpful to make a more effective air defense plan.

• Journal of Korean Society of Rural Planning
• /
• v.18 no.4
• /
• pp.27-34
• /
• 2012

The purpose of this study is to analyze the community center users' the determinants of utilization & satisfaction for the exploit and to draw out the implication as to what are the influencing factors. The ordered logit model approach was used to examine the determinants. For the use of community center, we surveyed by mail subjecting on rural residents for one month, June 2012, analyzed 625 valid questionnaires. The findings are as follows. First, 'Facility-Satisfaction', 'Education', 'Exploit-Frequency' and 'Age' are the most important factors which affect users' satisfaction. Second, 'A meeting hall function', 'Cultural & Educational function', 'Social & Organizational function', and 'functional criticality function' influence the attributes of users' utilization. Therefore, it is needed to establish the various functions of community center and to prepare the vitalization plan in futuristic viewpoint reflecting the change of rural area. In addition, since there is no clear entity to supervise community center administratively, policy support system to community center should be equipped. Along with these, it is needed to develop managing and operation model for customized community center.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.1
• /
• pp.9-18
• /
• 2021

Recently, the rapid proliferation, introduction, and application of the fourth industrial revolution technology has emerged as a trend in the construction market. Building Information Model (BIM) technology is a multidimensional information system that forms the basis of the fourth industrial revolution technology. The river sector utilizing this information-based system is also being actively reviewed, for example, the current measures for maintenance. In recent years, active research and current work should be done to reflect the need for river experts to introduce BIM into the river field. In addition, the development of tools and support software for establishing various information systems is essential for the activation of facility maintenance information systems reflecting advanced technology and to establish and operate management plans. A study on the maintenance of river facilities involves using existing drawings to build a three-dimensional (3D) information model, check the damage utilizing it, and inform it, and utilize it as the data for maintenance reinforcement. This study involved determining a method to build a river facility without the existing information system and using the property maintenance information with 3D modeling to provide a more effective and highly utilized management plan to check maintenance operations and manage damages.

• Journal of the Korean Home Economics Association
• /
• v.36 no.11
• /
• pp.119-128
• /
• 1998

This study was designed to find tendencies of housing value orientation of the model steel house visitors. Questionnaires were collected in June, 1997, 1,550 in total, 508 cases from Seoul, 456 cases from Pohang, and 486 cases from Kwangyang. Data were analyzed in terms of housing value orientation, using statistical methods including frequencies, mean, percentages, chi-square test and multiple regression. The major findings are as follows; 1. The subjects were highly educated(64% of them were college graduates) with the monthly income over 2,000,000won(approximately $1,540). The average monthy income of the subjects in Seoul, about 4,000,000won($3,070), was much higher than that of other areas. Most of the subjects were condominium owners(72%), who preferred single detatched houses or town houses located in suburban areas. 2. Differences in general tendencies among the three regional groups were statistically significant. Most significantly, subjects living in Pohang regarded the reputation of the building construction company most importnat. Subjects of all three regional areas, especially in Pohang, emphasized investment value. The price of the steel house was regarded as very important by all the groups tested. The housing value orientation was analyzed in 3 aspects; (1) Facility.Plumbing.Structure(FPS), (2) Interior space formation.Design(ID) and (3) Developmental complex.Near Environment(DN). Interior environment level, stability of house structure, and finighing state of interiors were identified as the important factors in the area of FPS(p<.05). The Interior plan organization was the most important factor among ID. As for DN, rated importantly were educational facilities, green areas, convenience of commercial facilities within the developmental complex were rated importantly.

• Plant Journal
• /
• v.8 no.2
• /
• pp.59-69
• /
• 2012

This study focuses on avoiding the failures from the wrong selections by experiences as simulation programs is not available, and suggests the methods which effectively select the alternatives when the selected model is not appropriate for the original plan. First, CC8800-1K of DEMAG has the longest boom whose length is 216 m at the maximum. The combination of the boom is feasible to second level except for MANITIWOC M 2250 (M-1200 RINGER) which is possible to third level. Second, the angle of boom is from 20 degrees to 82 degrees. Suitable angle to work is in the 55-78 degrees. The working load of crawler type and hydraulic one to be applied is 75-85% in the critical loads capacity. As increasing operating radius, crawler type is a favorable position over hydraulic one. Lastly, related problems were verified through examination by suggestions for the design of the selection methods for the case analysis. The major problems are stemming from the selection based on its experiences, unreasonable demand for the existing facility and repeated selections by the designer who accumulates his experiences via same or similar projects.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.2
• /
• pp.50-60
• /
• 2018

Recently, modular construction method has been widely applied to projects with repetitive processes including dormitory, the residential facility, and the hotel construction due to reduced labor input and shortened construction schedule. Generally, about 40% of total on-site construction cost excluding unit installation cost, is put on exterior finishing work, and thus management of finishing work is deemed important in maintaining the targeted schedule and cost. Since limited equipment is shared so that subsequent activities are not affected while carrying out on-site installation and finishing work, lifting plan becomes more important for modular projects with greater portion of finishing work load. In this regard, tower crane operation plan may take the form of a single cycle or multiple cycles in which equipment efficiency can be affected. However, difficulties exist in evaluating alternatives to tower crane operation plans supporting unit installation and finishing work. Therefore, this study aims to evaluate the alternative of tower crane operation method according to the cyclic period setting in modular building site to determine the effect on T/C uptime and process by parameterizing lifting time for unit and exterior finishing material, lift cycle for unit and exterior finishing material and time required for finishing work. Accordingly, this study develops a simulation model that can increase the tower crane efficiency by controlling the work speed. An academic contribution of this study is to suggest a resource leveling method applying the concept of lifting cycle, and further is expected to be managerially used as a basis for an alternative evaluation of equipment plan.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.3
• /
• pp.83-94
• /
• 2022

The number of public rental housing has increased according to the government's 「Housing Welfare Roadmap (2017)」, and facility maintenance costs for the demand of improvement of performance and residential standards due to the aging of long-term public housing are significantly increasing. Consequently, the financial burden of public housing rental business for maintaining stocked housing is aggravated. However, there is a lack of objective data to analyze the size of the maintenance costs that are executed by the type of repair work, and the elapsed years of the aged long-term public rental housing. This study analyzes the execution status of 33 long-term public rental housing complexes located in Seoul for 14 to 28 years of elapsed years based on the data of maintenance costs. In addition, this study proposes a model to predict the maintenance costs by elapsed years by dividing 'Long-term Repair Plan Work and Government-Funded Project [Y₁]', 'Planned Repair Work and General & Unplanned Repair Work [Y₂]', and 'Total maintenance costs [Y₃]'. It is intended to be used as basic data for the establishment of the maintenance plan at the stage of setting up the budget and the establishment of the sustainable operation plan for public rental housing

• Journal of the Korean Society for Library and Information Science
• /
• v.36 no.4
• /
• pp.49-67
• /
• 2002

School libraries are one of the essential parts for high quality education. The Seventh Educational Cumiculum emphasizes the development of creative and autonomous students who can solve problems in a self-directed way. The Ministry of Education and Human Resources Development come into forcing the installation of school digital library since 2001. Also, the Ministry of Education and Human Resources Development has presented the Master Plan of School's Activation in July 2002. In this situation, the research and discussion on effective model of school digital library are very important. Thus, This study aims to design a model of school digital library differentiated School's sizes depending on primary and secondary school's current status. This study is proposed 4 facility model of school digital library based differentiated school's sizes and designed A-type, B-Type model on individual model.

• Proceedings of the Korea Port Economic Association Conference
• /
• 2006.08a
• /
• pp.159-179
• /
• 2006

As the current trend to the main index of the port competitiveness evaluation, the competitiveness index of the port service comes to more important than the part of expense, location and facility. To reform the bottleneck of port has an effect on improving port service competitiveness. Therefore, this study shows the importance of analyzing bottlenecks on logistics to improve port competitiveness. It collected recent questionnaire data which are the subject as the Custom Service, the Chamber of Commerce and Industry, the Trade Association about bottlenecks of port logistics for working out bottlenecks of domestic port logistics and it produced the order of priorities of bottlenecks by multiplying each output priorities and weights of each process in user of Incheon inner-outer port which is focused on container freight by analysis of priority and Analytic Hierarchy Process(AHP). Unlike existing studies, this study has important values. It presents the priority evaluation only focused on the container freight was produced by port users who are categorized into shipping company, terminal operation company and forwarder, car-ferry in Incheon inner-outer port and making a application of logistics process. It means internal and external competitiveness improvement plan can be presented more concretely and detailed than past competitiveness attributes such as location, facility, service and expense. If the analysis of port logistics bottlenecks which was focused on container freight is extended to the part of general cargo and sundries such as haul grain, car, scrap iron, those studies will be able to provide Incheon port users with useful information and a model of analyzing overall bottleneck of logistics in Incheon port.