• 한국의상디자인학회지
• /
• 제12권4호
• /
• pp.197-206
• /
• 2010

The purpose of this study is to dye hanji/cotton fabrics using persimmon juice and to investigate the change in the hand fabrics. Using the Kawabata Evaluation System, we have examined the changes in the physical properties, primary hand value and total hand value. The dynamic characteristics of hanji/cotton fabrics have been explored by tensile, shear, bending, compression, surface properties, thickness and weight. As a result, it can be seen that the linearity of load-extension and tensile resilience are increased with the increase of the concentration and dyeing times of persimmon juice and tensile energy is decreased in the same condition. These behaviors are shown in the compression properties. Although the mechanism of persimmon juice dyeing has been widely discussed, it means that the fabrics dyed with persimmon juice become stiffened and the elasticity is increased with the introduction of persimmon on the fabrics studied. Bending rigidity and hysteresis of the bending moment are increased with the increase of the concentration and dyeing times of persimmon juice. Also, Geometrical roughness, expressed in SMD is increased with increasing the concentration and dyeing times of persimmon juice, compared with as-received. It indicates that these results are due to the geometric structure of hanji yarn and the introduction of persimmon juice on the fabrics studied. The fullness and softness with the soft feeing are increased a little due to the tannin component of persimmon juice introduced on the fiber surface.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.321-322
• /
• 2006

In many manufacturing processes such as web formation, manufacturing of paper and nonwoven, fabric weaving, etc., planar sheets are transported and at the same time appropriate tension is imposed. The input material rolled up on beams is fed by unwinding the beam and the processed is then taken up on beams by winding it. While processed, the planar sheets are thrown under the processing load of impulse form, which causes irregular thickness of the processed sheet. To improve the quality of the product, a dynamic model is needed and the dynamic characteristics is to be analyzed by simulation. This study shows that density variation dynamics of the in-process-sheet in the machine direction can be described at each moment of disturbing impacts in forms of difference equations, while the impacts and tension, the time-dependency of the material properties were taken into account. Simulation showed the most serious variation of the density occurred in the process starting phase. The starting velocity curve with step form showed the least variation of the density. As the time order of the function of the starting velocity cure becomes higher, the density variation gets greater.

• 패션비즈니스
• /
• 제12권6호
• /
• pp.61-72
• /
• 2008

The UV-protection effect of green-tea dyed fabrics was reported in our previous studies. The chitosan was used as a natural mordant of cellulose fiber for green tea extract because chitosan is a natural bio-polymer. The increase in the UV protection property of summer cellulose fabrics, cotton and linen, upon the repetition of chitosan mordanting and green tea dyeing was observed. However, the physical property change would be followed by this repeated wet processing of the cellulose fabric. Therefore, the physical changes of the chitosan mordanted and green tea dyed cotton and linen fabrics were evaluated by KES-FB system. Tensile, shear, bending, compression, and surface characteristics were tested upon the repetition of mordanting and dyeing treatments. Linearity of tensile force increased in the treated cotton and linen samples. Tensile energy and resilience decreased in all treated fabrics. Shear stiffness increased in the treated cotton and linen in general. Shear hysteresis was increased in all cotton samples and some linen samples. In cotton, the bending rigidity in all treated cottons increased except C3G3. As the chitosan mordanting numbers increased, the bending rigidity tended to decrease. In linen, the bending rigidity and hysteresis increased in all treated samples. Compressional energy and resilience increased as the number of chitosan mordanting increased both in cotton and linen. This could be the result of the increase in thickness upon chitosan mordanting. Surface coefficient of friction increased in the treated cotton and linen in general. Surface roughness tended to increase in cotton.

• 한국의상디자인학회지
• /
• 제17권4호
• /
• pp.77-90
• /
• 2015

This study is to designed to provide foundation for knit design which can apply the thickness and flexibility of jacquard knit by analyzing and comparing mechanical properties of 7 types of jacquard (normal jacquard, bird's eye jacquard, floating jacquard, tubular jacquard, ladder's back jacquard, blister jacquard, transfer jacquard) widely used in knit design to achieve the results. The sample was projected by using 7 gauge and SES-122S type computer knitting machine house tooth pattern with two colors were applied to 7 types of jacquard using Acrylic/Wool(30%/70%) $2/50.5^{\prime}s{\times}4ply\;yarn$ by Shimaseiki MFG., Ltd computer knitting machine. The mechanical properties of 7 types of jacquard samples were measured using KES-FB (Kawabata Evaluation System for Fabric, Kata Tech Co. Ltd). HV(Hand Value) and THV (Total Hand Value) were calculated by using the formula of KN-402-KT and KN-301-WINTER respectively. The measurements were evaluated by 0-to-5 rating scale. As result, the floating jacquard was found to have excellent drape, making it suitable for express feminine silhouette with its most flexible and smooth touch. On the other hand, bird's eye jacquard is adequate for a suit jacket and coat regarding its excellent volume and flexibility. Blister jacquard and tubular jacquard are thick, heavy and stiff knit and both are suitable for simple box-style design. Ladder's back jacquard, however, is more appropriate for expressing the design of feminine charm and voluminous design. Based on the result of this study, it is supposed to provide basic information for development of knit industry regarding jacquard knit by designing the creative knit wear with high production efficiency.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1475-1486
• /
• 2008

Bentonite-based grouting has been popularly used to seal a borehole installed for a closed-loop vertical ground heat exchanger in a geothermal heat pump system (GHP) because its high swelling potential. However, if the bentonite-based grouting is conducted in coastal areas, the salinity of groundwater changes in the mineral fabric of bentontie. In order words, an increase of cation concentration in groundwater leads to a reduction in the diffuse double-layer thickness in the bentonite mineral structure, and thus the volume of bentointe-based grouts will decrease proportional to the salinity of groundwater. In this paper, the effect of salinity (i.e., NaCl 0.5M, 0.25M, and 0.1M) on the change of swelling potential for bentonite-based grouts has been quantitatively evaluated for seven bentonite grouts from different product sources. In addition, in case of using addictives such as a silica sand to increase the thermal conductivity of bentonite-based grouts, the possibility of particle segregation has been studied considering the viscosity of grouts and salinity of groundwater.

• 복식
• /
• 제57권8호
• /
• pp.14-23
• /
• 2007

The purpose of this study was to investigate the present condition of cold protective clothing for mailman, to improve its design in movement, fitness, and other functions, and supply basic data for its performance evaluation. The results are as follows : The 46.60% of those questioned did not satisfy current clod protective clothing fer mailman. Especially, they considered dissatisfactory in properties such as waterproof, comfort, activity, and sweat absorption. The newly developed cold protective clothing is two-piece style composed of jacket and pants. Both jacket and pants are composed of inner and outer clothing individually. In both jacket and pants, their outer clothing's material was waterproof, windproof, and breathable shell fabric on which PTFE film laminated and their inner clothing's material was 100% polyester Polar polis to have better insulation property. The jacket has attachable cap which can be used as rain gear and set-in sleeve with stand collar. It also had big outside patch pockets and side seam pockets to ensure enough storage space. The pants have knee pads to give free movement to knees and slant side pockets. Inner clothing of both jacket and pants can be worn during working inside without out clothing. Insulation of the newly developed cold protective clothing was not better than current one except right hand, left hand and left foo. It is considered that is because thickness of material is the most important factor to influence insulation.

• 자연과학논문집
• /
• 제10권1호
• /
• pp.81-91
• /
• 1998

아우트-웨어로 많이 사용되는 면, 마, T/C, 모, 면니트의 직물을 이용하여 반복세탁에 따른 수축률, 마모 강도, 인장 강도, 필링, 방추도 등의 물리적 성질 변화에 대해 연구 조사하였다. 또한 모섬유의 경우 각각의 물리적 성질에 있어서 건식 세탁과 습식 세탁에 의한 차이를 비교 검토하였다. 실험결과 반복 세탁에 의해 인장강도는 그다지 변화하지 않았으나 방추도가 크게 저하하였으며 pill의 발생이 크게 증가하였다. 습식 세탁에 의해 면니트는 처짐 현상을 보였고 모의 경우 고온, 고알칼리 하에서의 반복 세탁에 의해 큰 수축현상을 나타냈으며 이러한 수축은 두께의 증가를 가져와 마모 강도를 증가시키는 결과를 가져왔다. 건식 세탁모가 습식 세탁모에 비해 모든 물리적 성질에 있어 훨씬 우수한 것으로 나타났다.

• 접착 및 계면
• /
• 제20권2호
• /
• pp.66-70
• /
• 2019

소수성 폴리프로필렌 섬유의 표면을 상압 플라즈마 공정을 이용하여 표면처리하였다. 친수성으로 개질된 섬유를 수용성 폴리비닐프롤리돈 (poly(N-vinylpyrrolidone, PVP) 코팅액에 딥코팅하여 PVP 막을 형성하였다. 섬유 표면에 코팅된 PVP 막은 15 kGy 선량의 전자 빔 조사를 통해 가교되어, 폴리프로필렌 섬유의 표면이 PVP 하이드로젤로 균일하게 코팅된 것을 확인하였다. PVP 하이드로젤 코팅막의 두께는 코팅액의 농도를 조절하여 제어할 수 있었다. 단계적인 표면처리, PVP 코팅, 그리고 하이드로젤 막의 형성에 따른 특성은 접촉각, 전자현미경, 광학현미경 등을 통해 분석되었다.

• 센서학회지
• /
• 제32권2호
• /
• pp.88-94
• /
• 2023

Recently, piezoelectric tactile sensors have garnered considerable attention in the field of texture recognition owing to their high sensitivity and high-frequency detection capability. Despite their remarkable potential, improving their mechanical flexibility to attach to complex surfaces remains challenging. In this study, we present a flexible piezoelectric sensor that can be bent to an extremely small radius of up to 2.5 mm and still maintain good electrical performance. The proposed sensor was fabricated by controlling the thickness that induces internal stress under external deformation. The fabricated piezoelectric sensor exhibited a high sensitivity of 9.3 nA/kPa ranging from 0 to 10 kPa and a wide frequency range of up to 1 kHz. To demonstrate real-time texture recognition by rubbing the surface of an object with our sensor, nine sets of fabric plates were prepared to reflect their material properties and surface roughness. To extract features of the objects from the detected sensing data, we converted the analog dataset to short-term Fourier transform images. Subsequently, texture recognition was performed using a convolutional neural network with a classification accuracy of 97%.

• 한국의류학회지
• /
• 제12권2호
• /
• pp.169-179
• /
• 1988

In the part 1, relations were found between fundmental mechanical properties and primary hand values, performance of Korean women's summer fabrics. In this paper, in order to investigate the hand values and mechanical properties such as tensile, shearing, bending, compression, surface and thickness & weight of the women's fall & winter fabrics were measured by KES-F system. Sorts of 90 commercial fabrics for women's fall & winter clothes were classfied into 39 silk and 51 polyester fabrics according to meterials. The experimental results were analysed statistically to relate the hand values and the mechanical properties and concerning to formation of weared clothes and transformation behavior were investigated. Furthermore, there mechanical properties as well as their hand values were discussed in comparison with those values for kimono fabrics. The main results are summarized as follows; 1. The shape of silk fabrics in formation for weared clothes show a box-shaped silhouette. Polyester fabrics has a easy to shape-less and make a silhouette which goes along with the body. 2. Silk fabrics for Korean women's fall & winter clothes have ${\pm}1\sigma$ range of bending, shearing, surface properties and thickness as compared with kimono fabrics. 3. A wrinkle recovery and drapability of silk fabrics for Korean women's fall & winter clothes are inferior to kimono fabrics. On the other hand, the fabrics for Korean women's fall & winter clothes have conical-shaped silhouette based on higher bending rigidity. 4. Except for flexibility with soft feeling, a primary factor of mechanical properties contributes to the hand values of fabrics for Korean women's fall & winter clothes having no concern with materials were same as the women's summer fabrics. 5. As for the hand values of fabrics for Korean folk clothes, stiffness, anti-drape stiffness are larger than those of kimono fabric and stiffness, anti-drape stiffness, crispness of fabrics for Korean women's fall & winter clothes have smaller values as compared with Korean women's summer fabrics.