• Korean Journal of Food Science and Technology
• /
• v.16 no.2
• /
• pp.206-210
• /
• 1984

Heat penetration pattern of canned oyster mushroom(Pleurotus astreatus) was monitored for processing variables-can size, heating temperature and solid fill fraction, and its effects on sterilization condition was reviewed. The $f_h$ value decreased sharply with decrease of solid fill fraction and then became stable from certain solid fill fraction unique to can size. Heat penetration was a little faster at higher heating temperature with lower $f_h$ value. As viewed from $f_h$ value, convection started at higher solid fill fraction with higher length/diameter ratio, and $f_h$ values decreased to about 1.0 with decrease of solid fill fraction. From standpoint of overall cost, retorting time and energy consumption, solid fill fraction of 3/5 was optimum for all can sizes considered.

• Journal of Sensor Science and Technology
• /
• v.10 no.4
• /
• pp.266-272
• /
• 2001

A coil-type capacitive sensor on which the deterioration of the car engine oil can be in situ measured, has been developed. The sensor was designed to get over 10 pF at the limited space on the drain hole of the oil pan. The design factors for stable capacitance measurement such as coil diameter and winding condition, materials and configuration of the coil former, and shielding method, etc., were known by both computer simulation and experimental investigations. The dielectric properties measured by several sensors for an used sample oil were consisted within 0.25%. The sensor installed on the car having severe vibration, temperature and humidity fluctuation, even electromagnetic noise, has shown very distinguishable results.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.5
• /
• pp.516-521
• /
• 2001

Dry etching of Si wafer and $SiO_2$ layers was performed using He/Cl$_2$ mixture plasma by diode-type reactive ion etcher (RIE) system. For Si etching, the Cl molecules react with the Si molecules on the surface and become chemically stable, indicating that the reactants need energetic ion bombardment. During the ion assisted desorption, energetic ions would damage the photoresist (PR) and produce the bad etch Si-profile. Moreover, we have examined the characteristics of the Cl-Si reaction system, and developed the new fabrication procedures with a $Cl_2$/He mixture for Si and $SiO_2$-etching. The developed novel fabrication procedure allows the RIE to be unexpensive and useful a Si deep etching system. Since the etch rate was proved to increase linearly with fHe and the selectivity of Si to $SiO_2$ etch rate was observed to be inversely proportional to fHe.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.1
• /
• pp.54-60
• /
• 2011

The flight control law designed for prototype aircraft often leads to degraded stability and performance, although developed control law verify by non-real time simulation and pilot based evaluations. Therefore, the proper evaluation methods should be applied such that flight control law designed can be verified in real flight environment. The one proposed in this paper is IFS (In-Flight Simulator). Currently, this system has been implemented into the F-18 HARV (High Angle of Attack Research Vehicle), SU-27 and F-16 VISTA (Variable stability In flight Simulation Test Aircraft) programs. The IFS necessary switching control law such as fader logic and integrator stand-by mode to reduce abrupt transient and minimize the integrator effect for each flight control laws switching. This paper addresses the concept of switching mechanism with fader logic of "TFS (Transient Free Switch)" and stand-by mode of "feedback type" based on SSWM (Software Switching Mechanism). And the result of real-time pilot evaluation reveals that the aircraft is stable for inter-conversion of flight control laws and transient response is minimized.

• Kyungpook Mathematical Journal
• /
• v.59 no.4
• /
• pp.603-615
• /
• 2019

Let R be an associative unital ring with an endomorphism α and α-derivation δ. The constant products of elements in Ore extension rings, when the coefficient ring is reversible, is investigated. We show that if f(x) = ∑ⁿ_i=0 a_ixⁱ and g(x) = ∑^m_j=0 b_jx^j be nonzero elements in Ore extension ring R[x; α, δ] such that g(x)f(x) = c ∈ R, then there exist non-zero elements r, a ∈ R such that rf(x) = ac, when R is an (α, δ)-compatible ring which is reversible. Among applications, we give an exact characterization of the unit elements in R[x; α, δ], when the coeficient ring R is (α, δ)-compatible. Furthermore, it is shown that if R is a weakly 2-primal ring which is (α, δ)-compatible, then J(R[x; α, δ]) = N iℓ(R)[x; α, δ]. Some other applications and examples of rings with this property are given, with an emphasis on certain classes of NI rings. As a consequence we obtain generalizations of the many results in the literature. As the final part of the paper we construct examples of rings that explain the limitations of the results obtained and support our main results.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.295-301
• /
• 2017

$SF_6$ decomposition products can be used to detect partial discharge (PD), but the metal materials in a PD area can significantly affect $SF_6$ decomposition characteristics. Disregarding the effect of metal materials on such characteristics inevitably result in certain errors when using them to diagnose the internal insulation faults of gas-insulated switchgears. This paper investigates the influence regularity on the main stable decomposition components of $SF_6$ (namely $SO_2F_2$ and $SOF_2$) of the commonly metal materials uesd in GIS, such as aluminum (Al), copper (Cu) and stainless steel (SS). Firstly, an experimental platform is constructed to simulate $SF_6$ decomposition under a PD area, and the influence regularities of Al, Cu and SS on the concentration, formation rate and saturation time of $SO_2F_2$ and $SOF_2$ are obtained. Secondly, the influence mechanism of Al, Cu and SS are preliminary explored combined with the chemical activity of the metal materials.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.16 no.4
• /
• pp.262-267
• /
• 1987

The effect of Schizandrae fructus extract (S.F.E.) on experimentally alloxan-induced diabetes in rabbits and the acute toxicity on mice were studied; $LP_{50}$ of the extract was 21.50g/kg by intraperitoneal administration in mice. S.F.E. showed more rapid recovering effect than the control group : all samples showed excellent effect of lowering the hyperglycemia, that is, the blood glucose level was significantly decreased by 800mg/kg in 2 days and by 200mg/kg in 6 days. SGPT activity was lowered promptly after 4 days in 800mg/kg. Total cholesterol level was not shown significant lowering effect by 200mg/kg, but rapid by 800mg/kg in 6 days; blood urea nitrogen level was decreased gradually in 800mg/kg after 10 days and 14 days in 200mg/kg. In histological studies of pancreas, the sample groups exhibited less karyorrhexis, vacuolar and vesicular change, more stable in contents of ${\beta}-cells$ than the control group.

• Progress in Superconductivity
• /
• v.5 no.1
• /
• pp.45-49
• /
• 2003

We have designed and fabricated the single-layer high $T_{c}$ SQUID magnetometer consisting of a directly coupled grain boundary junction SQUID with an inductance of 100 pH and 16 nested parallel pickup coils with the outermost dimension of 8.8 mm ${\times}$ 8.8 mm. The magnetometer was formed from a YBCO thin film deposited on an STO(100) bicrystal substrate with a misorientation angle of $30^{\circ}$. The SQUID magnetometer was further improved by optimizing the multi-loop pickup coil design for use in unshielded environments. Typical characteristics of the dc SQUID magnetometer had a modulation voltage of 40 $\mu\textrm{V}$ and a white noise of $30fT/Hz^{1}$2/. The SQUID magnetometer exhibited a 1/f noise level at 10 Hz reduced by a factor of about 3 compared with that of the conventional solid type pickup coil magnetometers and a very stable flux locked loop operation in magnetically disturbed environments.s.

• Archives of Pharmacal Research
• /
• v.14 no.2
• /
• pp.137-142
• /
• 1991

The structure of a $\beta$-allyl type phenylpropanoid was determined by single crystal X-ray diffraction analysis. The compound was recrystallized from a mixture of n-hexane and benzene in monoclinic crystal system with a = 24.782 (2), b = 10.537 (1), c = 7.871 (1) ${\AA}, \beta=95.74$ (1)$^\circ, $D_x$=1.216, $D_m$=1.22g/$cm^3$, space group $P2_1/a$, and Z=4. The structure was solved by direct method and refined by least-squares procedure to the final R value of 0.054 for 2824 observed reflections {$F{\geq}3\sigma(F)$}. The molecular geometry shows a most stable trans-form with respect to the bulky phenyls, and this conformation is settled by an intramolecular hydrogen bond. In the crystal, the molecules are arranged along with the screw axis, and stabilized by the $O{\cdot}H{\cdots}O$ type intermolecular hydrogen bonds. The other intermolecular contacts appear to be the normal van der Waals' interactions. The compound is a dimeric phenylpropanoid, and belongs to the neolignan analogues.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.364-368
• /
• 1994

Algebraic matrix Riccati equations of the form, FP+PF$^{T}$ -PRP+Q=0. are analyzed with reference to the stability of closed-loop system F-PR. Here F, R and Q are n * n real matrices with R=R$^{T}$ and Q=Q$^{T}$ .geq.0 (nonnegative-definite). Such equations have been playing key roles in optimal control and filtering problems with R .geq. 0. and also in the solutions of in H$_{\infty}$ control problems with R taking the form R=H$_{1}$$^{T}$ H$_{1}$-H$_{2}$$^{T}$ H$_{2}$. In both cases an existence of stabilizing solution, i.e. the solution yielding asymptotically stable closed-loop system, is an important problem. First, we briefly review the typical results when R is of definite form, namely either R .geq. 0 as in LQG problems or R .leq. 0. They constitute two extrence cases of Riccati to the cases H$_{2}$=0 and H$_{1}$=0. Necessary and sufficient conditions are shown for the existence of nonnegative-definite or positive-definite stabilizing solution. Secondly, we focus our attention on more general case where R is only assumed to be symmetric, which obviously includes the case for H$_{\infty}$ control problems. Here, necessary conditions are established for the existence of nonnegative-definite or positive-definite stabilizing solutions. The results are established by employing consistently the so-called algebraic method based on an eigenvalue problem of a Hamiltonian matrix.x.ix.x.