• Korean Chemical Engineering Research
• /
• 제59권2호
• /
• pp.254-259
• /
• 2021

Optical and electrical characteristics of the fluorocarbon films deposited in a high-density C4F8 plasma under various source powers and pressures were investigated. The F/C ratio of the fluorocarbon film deposited in a high-density C4F8 plasma increased with increasing source power and decreasing pressure due to two-step deposition mechanism. The change in the F/C ratio of the film directly affected the optical and electrical characteristics of the fluorocarbon films deposited in a high-density C4F8 plasma. The refractive index of the fluorocarbon film increased with decreasing source power and increasing pressure contrary to the dependence of the film's F/C ratio on the source power and pressure. This was because the increase in the F/C ratio suppressed electronic polarization and weakened the network structures of the film. The resistivity of the fluorocarbon film showed the same behavior as its F/C ratio. In other words, the resistivity increased with increasing source power and decreasing pressure, resulting from stronger repellence of electrons at higher F/C ratios. This work offers the feasibility of the use of the fluorocarbon films deposited in a high-density C4F8 plasma as an alternative to low dielectric constant materials because the optical and electrical properties of the fluorocarbon film can be directly controlled by its F/C ratio.

• Journal of the Korea institute for structural maintenance and inspection
• /
• 제28권3호
• /
• pp.83-90
• /
• 2024

This study investigates the 3D printing characteristics of strain hardening cement composites (SHCC) reinforced by PVA fibers. Three SHCC mixtures with diverse fiber volume fractions (1.0% for F1.0 mixture, 1.5% for F1.5 mixture, and 1.8% for F1.8 mixture) were designed. Except for the F1.0 mixture, all mixtures met the necessary conditions for multiple micro-cracking, with higher fiber volume fractions more readily satisfying these conditions. The flow values of three SHCC mixtures were within the 3D printable range of 120~160 mm, exhibiting decreased flow values with increasing the fiber volume fractions. Observation of the printed SHCC surfaces indicated that the F1.0 mixture had a Level-3 (good) rating, while F1.5 and F1.8 were rated as Level-2 (average). Higher fiber volume fractions resulted in poorer surface quality, thus, further research needs to be performed for modulating SHCC mixture suitable for 3D printing. The uniaxial tension behavior showed that the F1.0 mixture failed at lower strain, whereas F1.5 and F1.8 exhibited higher strain performance with multiple micro-cracks occurring.

• Journal for History of Mathematics
• /
• 제23권3호
• /
• pp.121-140
• /
• 2010

This study presents one universal mean formula of implicate quantity for speed, temperature, consistency, density, unit cost, and the national income per person in order to avoid the inconvenience of applying different formulas for each one of them. This work is done by using the principle of lever and was led to the formula of two implicate quantity, $M=\frac{x_1f_1+x_2f_2}{f_1+f_2}$, and to help the understanding of relationships in this formula. The value of ratio of fraction cannot be added but it shows that it can be calculated depending on the size of the ratio. It is intended to solve multiple additions with one formula which is the expansion of the mean formula of implicate quantity. $M=\frac{x_1f_1+x_2f_2+{\cdots}+x_nf_n}{N}$, where $f_1+f_2+{\cdots}+f_n=N$. For this reason, this mean formula will be able to help in physics as well as many other different fields in solving complication of structures.

• Journal of the Korean Mathematical Society
• /
• 제48권1호
• /
• pp.105-115
• /
• 2011

Let f be a function which assigns a positive integer f(v) to each vertex v $\in$ V (G), let r, s and t be non-negative integers. An f-coloring of G is an edge-coloring of G such that each vertex v $\in$ V (G) has at most f(v) incident edges colored with the same color. The minimum number of colors needed to f-color G is called the f-chromatic index of G and denoted by ${\chi}'_f$(G). An [r, s, t; f]-coloring of a graph G is a mapping c from V(G) $\bigcup$ E(G) to the color set C = {0, 1, $\ldots$; k - 1} such that |c($v_i$) - c($v_j$ )| $\geq$ r for every two adjacent vertices $v_i$ and $v_j$, |c($e_i$ - c($e_j$)| $\geq$ s and ${\alpha}(v_i)$ $\leq$ f($v_i$) for all $v_i$ $\in$ V (G), ${\alpha}$ $\in$ C where ${\alpha}(v_i)$ denotes the number of ${\alpha}$-edges incident with the vertex $v_i$ and $e_i$, $e_j$ are edges which are incident with $v_i$ but colored with different colors, |c($e_i$)-c($v_j$)| $\geq$ t for all pairs of incident vertices and edges. The minimum k such that G has an [r, s, t; f]-coloring with k colors is defined as the [r, s, t; f]-chromatic number and denoted by ${\chi}_{r,s,t;f}$ (G). In this paper, we present some general bounds for [r, s, t; f]-coloring firstly. After that, we obtain some important properties under the restriction min{r, s, t} = 0 or min{r, s, t} = 1. Finally, we present some problems for further research.

• The Korean Nurse
• /
• 제31권1호
• /
• pp.68-87
• /
• 1992

The purpose of this study is to develop a patient care standard which is the basis of unit based quality assurance. The subjects were 570 nurses of 6 hospitals is Seoul. Patient Care Standards were developed from 3 times of clinical Nurses Association's workshop & the joint meeting of Clinical Nurses Association & the Korean Nurses Academic Socity of Nursing Administration. Respondents were instructed to rate of the 2 types of 5 - point Likert type questionnaire(one is the level of perceived importance, the other is the level of actual performance) Findings of this study were as follows 1. As a results of reliability analysis, each questionnaire ranged from $\alpha$=0.79 to 0.94