• Bulletin of the Korean Chemical Society
• /
• v.27 no.9
• /
• pp.1315-1322
• /
• 2006

The following study describes the gas chromatography-mass spectrometry (GC-MS) based screening and confirmation analysis of urinary androgenic steroids. Four commercially available solid-phase extraction (SPE) cartridges, Serdolit PAD-1, Sep-pak $C_{18}$, amino-propyl, and Oasis HLB, and three different extractive organic solvents, diethyl ether, methyl tert-butyl ether (MTBE), and n-pentane, were tested for sample preparation. Overall, Oasis HLB combined with MTBE extraction provided the highest recoveries in 39 of 46 total androgenic steroids examined and it showed a good extraction yield (>82.1%) for polar steroids, such as metabolites of fluoxymesterone, oxandrolone, and stanozolol, which gave a poor recovery in both n-pentane (9.2-64.3%) and diethyl ether (22.2-73.6%) extractions. All SPE sorbents tested showed potential, because they were efficient in extraction for most or selective steroids. When applied to positive urine samples based on the results obtained, the present method allowed selective and sensitive analysis for detection of urinary androgenic steroids. The experiments showed that the high-resolution MS method is clearly more efficient than the low-resolution MS technique for the detection of many urinary steroids. However, comprehensive sample clean-up procedures also might be needed especially in confirmation analysis to increase detectability.

• Journal of Environmental Science International
• /
• v.17 no.1
• /
• pp.19-27
• /
• 2008

Artichoke extracts are widely used alone or in association with other herbs for embittering alcoholic and soft drinks and to prepare herbal teas or herbal medicinal products in Viet Nam. The objective of this paper was a screening of flavonoids and total phenolic compounds content in the parts of artichoke (Cynara scolymus L.) as flowers, leaves, roots, trunks, stumps, The total phenolic compounds and flavonoids in the parts of artichoke were extracted among 3 extraction methods as methanol extraction (EM1), mixing methanol and water method (EM2) and water extraction method (EM3). Total phenolic compounds and flavonoids were determined by UV/VIS, HPLC techniques. The apigenin 7-O-glucosides, cynarin, narirutin, gallic acid, caffeic acid were found as the main flavonoids constituents in all parts of artichoke. It showed that value of total phenolic compounds and flavonoids by EM3 were higher than that of total phenolic compounds and flavonoids by EM1 and EM2. Furthermore, the results of this study revealed that total phenolic compounds and flavonoids, obtained by these convenient extraction methods, may show the quick efficacy of artichoke in all respects of their quality and quantity.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.8
• /
• pp.1116-1123
• /
• 2020

Velvet antler (VA) is a historically traditional medicinal supplement and is well known in Asian countries for its pharmaceutical and health benefits. The objectives for this study were to optimize the hot water extraction (HWE) of VA for the Korean VA industry, and to determine the most effective pretreatment method among microwave (MW), ultrasonication (US), and enzymatic (EZ) techniques. Using response surface methodology, optimum extraction temperatures and times were determined by central composite design configuration based on extraction yield and sialic acid content. Various quality parameters of VA extract including yield, soluble solid, protein, and sialic acid contents were also compared with the conjunction of HWE and pretreatment. The yield and sialic acid content of VA extract were determined to be 40% and 0.73 mg/g, respectively, under an optimum temperature of 100℃ at 24 h of extraction time. The yields from VA extracts pretreated with MW, US, and EZ were 17.42%, 19.73%, and 29.15%, respectively. Among the tested commercial enzymes, pepsin was the most effective proteolytic enzyme and led to the highest yield (47.65%), soluble solids (4.03 °brix), protein (1.12 mg/ml), and sialic acid (3.04 mg/ml) contents from VA extract.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.409-412
• /
• 2003

Total extraction of stream sediments in the Kwangyang mine area shows their significant pollution with most trace metals such as Cr, Co, Fe, Pb, Cu, Ni, Zn and Cd, due to sulfide oxidation in waste dumps. Calculations of enrichment factor shows that Chonam-ri creek sediments are more severely contaminated than Sagok-ri sediments. Using the weak acid (0.1N HCl) extraction and sequential extraction techniques, the transport and sediment-water partitioning of heavy metals in mine drainage were examined for contaminated sediments in the Chonam-ri and Sagok-ri creeks of the Kwangyang Au-Ag mine area. Calculated distribution coefficient (Kd) generally decreases in the order of Pb $\geq$Al > Cu > Mn > Zn > Co > Ni $\geq$ Cd. Sequential extraction of Chonam-ri creek sediments shows that among non-residual fractions the Fe-Mn oxide fraction is most abundant for most of the metals. This indicates that precipitation of Fe hydroxides plays an important role in regulating heavy metal concentrations in water, as shown by field observations.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.10
• /
• pp.5078-5094
• /
• 2019

In recent years, the development of drone technologies has promoted the widespread commercial application of drones. However, the ability of drone to carry explosives and other destructive materials may bring serious threats to public safety. In order to reduce these threats from illegal drones, acoustic feature extraction and classification technologies are introduced for drone sound identification. In this paper, we introduce the acoustic feature vector extraction method of harmonic line association (HLA), and subband power feature extraction based on wavelet packet transform (WPT). We propose a feature vector extraction method based on combined HLA and WPT to extract more sophisticated characteristics of sound. Moreover, to identify drone sounds, support vector machine (SVM) classification with the optimized parameter by genetic algorithm (GA) is employed based on the extracted feature vector. Four drones' sounds and other kinds of sounds existing in outdoor environment are used to evaluate the performance of the proposed method. The experimental results show that with the proposed method, identification probability can achieve up to 100 % in trials, and robustness against noise is also significantly improved.

• Resources Recycling
• /
• v.18 no.6
• /
• pp.3-9
• /
• 2009

The present review paper deals the liquid-liquid extraction (LLE) general principles and the basic fundamentals, general process of LLE followed by the importance of LLE reagents. LLE is a process of transferring a chemical compound from one liquid phase to a second liquid phase, immiscible with the first. In analytical chemistry, this method enjoys a favored position among separation techniques because of its simplicity, speed and wide scope. By utilizing apparatus no more complicated than a separatory funnel and requiring several minutes at most to perform, extraction procedures offer much to the analytical chemist.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.5
• /
• pp.251-255
• /
• 2019

On today, Protocol reverse-engineering technique can be used to extract the specification of an unknown protocol. However, there is no standardized method, and in most cases, the extracting process is executed manually or semi-automatically. If the information about the structure of an unknown protocol could be acquired in advance, it would be easy to conduct reverse engineering. the feature extraction is an important step in unknown protocol classification. However, in this paper, we present a comparison several feature extraction techniques and suggests a method of feature extraction algorithm for recognizing unknown protocol. In order to verify the performance of the proposed system, we performed the training using eight open protocols to evaluate the performance using unknown data.

• Nuclear Engineering and Technology
• /
• v.54 no.5
• /
• pp.1623-1634
• /
• 2022

A new irradiation loop design has been developed, which provides the ability to carry out radiolytic resistance studies of extraction systems simulating process relevant conditions in an easy and simple way. The step-by-step loop configuration permits an easy modification of settings and has a relative low volume requirement. This irradiation loop has been initially set up to test the main EURO-GANEX process steps: the lanthanide (Ln) and actinide (An) co-extraction followed by the transuranic (TRU) stripping. The performance and changes in the composition have been analyzed during the irradiation experiment by different techniques: gamma spectroscopy and ICP-MS for the extraction and corrosion behavior of the full system, and HPLC-MS and Raman spectroscopy to determine the degradation of the organic and aqueous solvents, respectively. The Ln and An co-extraction step and the corrosion that occurred during the first irradiation step revealed the favorable expected results according to literature. The effects of acidity changes occurred during the irradiation process, the presence of stainless corrosion products in solution as well as the new possible degradation compounds have been explored in the An stripping step. The results obtained demonstrate the importance of developing realistic irradiation experiments where different factors affecting the performance can be easily studied and isolated.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.48 no.2
• /
• pp.86-97
• /
• 2024

Alkaline- or salt-assisted extractions have been widely used to extract edible insect proteins, however, there is a need for extraction techniques that balance cost-efficient production as well as preserving the protein properties. Mealworm proteins (Tenebrio molitor larvae) were extracted using three different extraction methods-alkali (AMP), salt (SMP), and water (WMP)-and then physicochemical and techno-functional properties were examined. AMP had high yield, protein, and amino acid contents, whereas WMP had high moisture, ash, and fat contents. SDS-PAGE showed a wide range of molecular weights in WMP whereas mostly low molecular weights were observed in AMP and SMP. AMP had poor protein solubilities compared to SMP and WMP across all pHs. AMP had enhanced water-holding capacity and emulsion stability, whereas WMP had improved oil-holding capacity and foaming properties. WMP formed a gel with and without the transglutaminase. The physicochemical and techno-functional properties demonstrated that water-soluble mealworm protein was superior to alkali-and salt-soluble mealworm proteins. Considering the cost efficiency and minimal impact on the environment as well, a cold press juicer could be utilized for mass production of mealworm protein compared to the conventional methods of protein extraction using alkali and salt.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.03a
• /
• pp.69-90
• /
• 1996

In the chemical industry, in the pharmaceutical industry, and in a number of other industries separation processes are necessary to separate and purify products and raw materials [1,2]. Separation processes are also widely used in other applications such as in recycling valuable materials from waste streams. Unit operations for separation processes can be classified in phase separation techniques and component separation techniques based on the nature of the feed mixtures to be separated. The former techniques are used for the separation of heterogeneous mixtures, in which the feed is already present in two or more separated phases on a micro-scale. The latter are suitable for the separation of homogeneous mixtures such as gaseous mixtures and mixtures of completely miscible liquids. tn these cases the separation into individual components is generally achieved by utilizing the differences in physico-chemical properties of components, and is much more difficult compared to phase separation techniques. Separation processes such as distillation, evaporation, liquid-liquid extraction, and crystallization belong to this class.