• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.6
• /
• pp.821-832
• /
• 2002

The purpose of this study was to develop grading method of the basic brassiere patterns therewith, provide for 12 size's brassiere patterns and prove fitness of their's and shape. The collected data were statistically processed using the SAS 6.12 for Means, Standard Deviation, etc. The results of this study can be summarized as follows; 1. The basic sizes adopted at the first design stage (see fig.1-2) were 75AA, 75A and 75B each of which was designed as upper foundation basic pattern in reference to the cup size. At the second stage, each of the upper body foundation basic pattern was used to design lower cup, upper up, front panel and wing in their order(see fig.3-6). At the third stage, the other sizes were graded in reference to the three brassiere patterns (75AA, 75A and 75B) to produce 12 brassiere sizes(see Tab. 7-8). In order to develop the basic patterns of adult women's brassieres, 33 women were selected per 11 size combination(3 women per size combination), and then, their brassiere fitting was teated. As a result, the fronts of the basic patterns were found to have such problems as undone front center, poor levelling of upper cup's bottom line or lower cup's top line, poor shape of upper cup's outside top line and shoulder strip position. On the other hand, on the rear side of the basic patterns, the central part of the wing was slightly lifted, while the wing width and straps'interval did not befit the ful1-cup brassiere. The result of this first brassiere fitting test showed that the functionality and aesthetics of the basic pattern brassieres were more or less satisfactory, and thus, the problems were addressed for the second teat. In the second test, the aesthetics, breast-shaping effect and functionality of the basic pattern brassieres were much improved. 2. We were to present the final brassiere sizing system to extend the interior length of breast and the exterior length of breast on the basis of fitting test. Thereby, 75B$.$80A$.$80B$.$85A$.$85B's the interior lengths of breast were enlarged to 0.7cm, the rest size was enlarged to 0.5cm and the exterior length of breast was enlarged to 0.5cm regardless of sizes. 3. The upper foundation basic patterns of 75AA and 75B were presented and and the basic brassiere pattern and grading pattern were presented through to.

• (The)Study of the Eastern Classic
• /
• no.33
• /
• pp.385-411
• /
• 2008

This thesis aims at examining his understandings about the The Great Learning centering on the of the founder of the YiYongHuSaeng School (利用厚生學派: A school who pursued prosperous economy and welfare of people) orthe BukHak School(北學派: A positive school that pursued mercantilism) from the Joseon Dynasty, Dam-Heon Hong Dae Yong (1731-1783). 1) From what is indicated in the , his studies mainly focused on the annotations from DaeHakJangGuDaeJeonJipJu ("大學章句大全集註": A book that edited different phrases from the Great Learning into chapters and paragraphs), Questioning of the Great Learning", and "JuJaUhRyu (朱子語類: A book of Confucian literature written by Yeo Jung Deok" of Zhu Xi who was a representative scholar of the Neo-Confucianism in the Song Dynasty. 2) Acknowledging entirely the arguing points of Zhu Xi, he is taking a critical position in a way that partial doubts are divided into seven chapters and questioned. 3) For the main characteristic and direction of the questioning, he is estimating that Zhu Xi only stressed the 'means' and 'interior' out of the world of 'means and ends' and 'interior and exterior' in Zhu Xi's recognizing and handling cases; instead, he emphasized putting equivalent value on the 'ends' and 'exterior' as well. 4) In fact, such questions raised partially were misconceived since they were not carried out through profound understanding nor systematic logic expansion of what Zhu Xi insisted. 5) Despite this, at the point where Neo-Confucian thoughts were fixed and weakened only with its form left in the late Joseon Dynasty, his perspective on the study of Confucian classics that the 'ends' and 'exterior' should be as equally valued as the 'means' and 'interior' by examining through the core text of the Neo-Confucianism, The Great Learning has its significance in his YiYongHuSaeng dogma that says politicians, by all means, should provide the ruled with economic convenience and welfare and this is their very right virtue.

• Journal of Sasang Constitutional Medicine
• /
• v.11 no.1
• /
• pp.253-269
• /
• 1999

1. Purpose We know that Sasang Constitution is decided by difference of Sung-Jung(性情). Lee je-ma emphasized that Sa-Sim-Sin-Mul(事心身物) and Sung-Jung is important key. So, this paper is to know that the characteristics of constitutional symptoms also is explained by Sa-Sim-Sin-Mul and Sung-Jung, to find sequence between Sung-Jung and symptoms. 2. Method Through the Sa-Sim-Sin-Mul, decision of Sasang constitution and physiologics of Jang-Bu(臟腑), each the inerior-exterior characteristics of constitutional symptoms were researched. 3. Results It is found that structual characteristics of interior-exterior, in-out(內外), upper-town(上下) and functional characteristics of Warm-Hot-Cool-Cold(寒熱溫凉), ascent-descent-unfast-fast(升降援束), large-small(大小) are based on Sung-Jung and the summarizing spirit Sa-Sim-Sin-Mul.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.6
• /
• pp.531-537
• /
• 2011

This research was performed to evaluate the decay hazard for exterior above-ground wood in Korea. The Scheffer index (decay hazard index) was determined using the climate data of 72 different locations obtained from the website of Korea Meteorological Administration (KMA), and the wood decay hazard map was created. Jeju, Seogwipo, Gwangju, and Jeonju showing above 65 of Scheffer index values were considered to be high decay hazard zones. The rest showed the values in the range between 35 and 65, meaning the moderate decay hazard zones. However, the annual Scheffer indexes largely varied, which suggests that many moderate decay zones could turn into high decay regions with the climate change. Especially, considering that Korean weather tends to turn into the weather of subtropical region, the decay hazard of Korea seems to have high possibility to be gradually increased.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.3
• /
• pp.255-266
• /
• 2010

In high-rise buildings, an outrigger system is frequently used as a resisting system for lateral loads. Since the outriggers tie exterior columns and an interior core, exterior columns can participate in the lateral load resisting system and the structural resistance capacity can be increased. However, the outriggers contribute for controlling gravity loads as well as lateral loads. The flows of gravity loads can be changed by the members of outriggers, for the purposes of transferring loads to mega-columns, distributing gravity loads equally among vertical members of columns, walls, or piles, minimizing differential settlements in a foundation system, and so on. In this study, by computational structural analyses of high-rise buildings over 100 floors, the effects of outriggers on controlling gravity loads are analyzed. Analyses for 3-dimensional models with or without outrigger members are performed, and then the gravity load distributions in columns and piles and foundation settlements are analyzed. Also, the effects of outriggers on gravity load controls during construction stages as well as after construction are included.

• Fire Science and Engineering
• /
• v.27 no.2
• /
• pp.25-30
• /
• 2013

'Heaundae Woosin Building' fire was the case that a fire breaking out on the $4^{th}$ floor spread out the $38^{th}$ floor which is a top story and the penthouse was destroyed by fire. After this fire, the fire safety for high rise buildings has been on the rise and several new laws and regulations related in the buildings were created. The study is to analyze Heaundae officetel building case using FDS which is one of the CFD programs for fire. The methodology of this study is to analyze the case comparing with fire spread and route from a virtual fire simulation and related articles and a video clip of actual scene fire. This study shows that a fire spreading on top of levels spent approximately 30 minutes and, which is similar to the actual fire case. Also the pattern of spread has similarity with the case. However, even if the actual fire case shows the fire pattern was "V shape", the smoke-view presents the fire dose not spread horizontally as much as the real fire case. The result shows uncertainty of the modeling based on many grids and a limitation of putting interior finish input sources and the direction of the wind might cause the difference. Also, to analyze factors influencing on a vertical fire, another fire modeling is performed by in condition of modeling environment considering concrete interior finish between buildings and no wind. The result presents the fire spread in smoke-view does not spread vertically as much as the actual case.

• Archives of design research
• /
• v.19 no.3 s.65
• /
• pp.105-116
• /
• 2006

In product manufacturing industries, a recent issue is the green concept. The green concept is a complicated area. If the green concept is for products, its serious issues have to be criticized. Although the importance of the green concept has overflowed, its influences have not been disputed vigorously. So this study is to critic the serious issues of the green concept in aesthetics in product design, manufacturing, and products' prices. The green environment has four representative elements: systems, policies, minds, and technologies, but they are not in the field of design. An element of the green concept, green design is also a sub concept for design, so it should be based on aesthetics. It is green aesthetics. But since green design first appeared, it has never approached by aesthetics because it has mostly had social meanings and expectations. So for green aesthetics, to think about what makes a product, and what can be aesthetic issues among them are important. Products consist of form, structure, material, and technology. Form means different shapes in a structure, but there cannot be any specific directions for a green concept. Structure has two kinds: interior and exterior structure. While interior structure has a technological character, exterior structure is deeply related with aesthetics, but it has also no chance for green concept. Material can be divided as two also: aesthetic and technological. Aesthetics materials mean the colors, opacity, and tactile sense of materials, but they are not aesthetic issues. Technological materials are recycled materials or non-recycled materials. Even if recycled materials are used today, they are close to systems or policies rather than aesthetics. With this result, green aesthetics is a very difficult concept. Second, green products are usually 30% more expensive than general products. But every consumer has his or her own economical conditions, and nobody can coerce consumers into buying expensive green products for green environments. And green products without good quality cannot satisfy consumers. This means that green concept is not accomplished by just manufacturing green products. Third, although a lot of proposals have appeared as green design in exhibitions, most of them are close to craft because they are so hard to be manufactured. Manufacturing is the first consideration for products. These three issues are enough to explain why green concept is complicated in manufacturing products. If they are not solved, the green concept is just a fiction. So if this study proposes a turning point against blind green-oriented atmosphere, it will be meaningful enough.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.1
• /
• pp.142-150
• /
• 2010

The purpose of this study is to analyze maintenance costs and estimation of elemental costs for educational buildings. The adapted research method selected four school buildings in seoul region as BTL projects. On the basis of the selected case, the study suggested a model to establish a system for each parts and estimate analyzed construction costs and maintenance costs according to that system. According to the analysis, the study proposed a partial construction costs analysis table and maintenance costs table and analyzed proper construction costs and maintenances costs. The results of this study are as follows 1) The average ratio followed by calculation of partial construction costs of the four school buildings are as followings. The total construction costs is analysed 6,666million won and each part of average rations is structure 47.15%, exterior of building 8.34%, interior of building 23.37%, electricity & fire fighting facility 5.74%, water supply & healthy facility 4.27%, heating & water supply facility 5.25%, landscape 1.36%, civil engineering works 4.51%. 2)The average ratio followed by analysis of partial maintenance costs of the four school buildings are as followings. The total maintenance costs is analysed 4,309 million won and each part of average ratio is exterior of building 11.02%, interior of building 41.81%, electricity & fire fighting facility 14.81%, water supply & healthy facility 11.22%, heating & water supply facility 12.76%, landscape 5.75%, civil engineering works 2.63%.

• Korean Journal of Remote Sensing
• /
• v.31 no.5
• /
• pp.461-471
• /
• 2015

In this study, we generated orthoimages and Digital Elevation Model (DEM) from Unmanned Aerial Vehicle (UAV) to confirm the accuracy of possibility of geospatial information system generation, then compared the DEM with the topographic height values measured from Real Time Kinematic-GPS (RTK-GPS). The DEMs were generated from aerial triangulation method using fixed-wing UAV and rotary-wing UAV, and DEM based on the waterline method also generated. For the accurate generation of mosaic images and DEM, the distorted images occurred by interior and exterior orientation were corrected using camera calibration. In addition, we set up the 30 Ground Control Points (GPCs) in order to correct of the UAVs position error. Therefore, the mosaic images and DEM were obtained with geometric error less than 30 cm. The height of generated DEMs by UAVs were compared with the levelled elevation by RTK-GPS. The value of R-square is closely 1. From this study, we could confirm that accurate DEM of the tidal flat can be generated using UAVs and these detailed spatial information about tidal flat will be widely used for tidal flat management.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.118-125
• /
• 2007

To obtain design data for built-up beams used as headers in light-frame timber construction, three members of $2{\times}6$ ($38{\times}140 mm$), $2{\times}8$ ($38{\times}184 mm$), $2{\times}10$ ($38{\times}235 mm$) and $2{\times}12$ ($38{\times}286 mm$) were built up as specimens of bending tests. The bending strengths of built-up headers were obtained through bending tests of these specimens, and it was considered that span tables can be calculated for various loading conditions based on the bending strengths of built-up headers. The bending strengths of built-up headers were determined as the bending stresses at 10 mm deflection of specimens from the results of bending tests of built-up beam specimens. Span tables for built-up headers were considered to be obtained by assuming five loading conditions for headers used in exterior walls and two loading conditions for headers used in interior walls. Among these 7 loading conditions, 5 loading conditions applied to headers in exterior walls included dead loads, live loads and snow loads and 2 loading conditions applied to headers in interior walls included dead loads and live loads.