• Transactions on Electrical and Electronic Materials
• /
• 제11권3호
• /
• pp.93-105
• /
• 2010

Complementary metal-oxide-semiconductor (CMOS) technology scaling has been a main key for continuous progress in silicon-based semiconductor industry over the past three decades. However, as the technology scaling enters nanometer regime, CMOS devices are facing many serious problems such as increased leakage currents, difficulty on increase of on-current, large parameter variations, low reliability and yield, increase in manufacturing cost, and etc. To sustain the historical improvements, various innovations in CMOS materials and device structures have been researched and introduced. In parallel with those researches, various new nanoelectronic devices, so called "Beyond CMOS Devices," are actively being investigated and researched to supplement or possibly replace ultimately scaled conventional CMOS devices. While those nanoelectronic devices offer ultra-high density system integration, they are still in a premature stage having many critical issues such as high variations and deteriorated reliability. The practical realization of those promising technologies requires extensive researches from device to system architecture level. In this paper, the current researches and challenges on nanoelectronics are reviewed and critical tasks are summarized from device level to circuit design/CAD domain to better prepare for the forthcoming technologies.

• 콘크리트학회논문집
• /
• 제15권6호
• /
• pp.915-923
• /
• 2003

This paper presents the test results of total 35 direct tensile specimens to investigate the effect of high-strength concrete on the tension stiffening effect in axially loaded reinforced concrete tensile members. Three kinds of concrete strength 25, 60, and 80 MPa were included as a major experimental parameter together with six concrete cover thickness ratios. The results showed that as higher strength concrete was employed, not only more extensive split cracking along the reinforcement was formed, but also the transverse crack space became smaller. Thereby, the effective tensile stiffness of the high-strength concrete specimens at the stabilized cracking stage was much smaller than those of normal-strength concrete specimens. This observation is contrary to the current design provisions, and the significance in reduction of tension stiffening effect by employment of high-strength concrete is much higher than that would be expected. Based on the present results, a modification factor is proposed for accounting the effect of the cover thickness and the concrete strength.

• 산업기술연구
• /
• 제29권B호
• /
• pp.73-80
• /
• 2009

This paper is to investigate effect of B.G.I (Best Grouting Innovation) method on reinforcing ground. In this thesis, extensive literature review was performed to summarize theoretical backgrounds of grouting and to compare the applicability of different grouting methods. Unconfined compression test with specimen prepared by injecting different grouts of B.G.I, S.G.R and L.W methods and by changing the curing time were carried out to figure out characteristics of initial unconfined compression strength mobilized in the early stage. As results of test, the compression strength increases with curing times and specimen prepared with grouts of B.G.I method show greater values than others. On the other hands, the measured values of pH are in the range of 7-10 during tests. In field, preliminary construction to main construction at several sites were performed to confirm the effect of reinforcing the ground by application of B.G.I method. From the results of permeability test in field, SPT test and phenol reaction test, it was found that N values after grouting are greater than those before grouting and values of permeability in grouted ground is reduced significantly.

• Archives of Reconstructive Microsurgery
• /
• 제9권1호
• /
• pp.80-87
• /
• 2000

Acute high speed accidents that results in full thickness skin defect and exposure of tendon, nerve, vessel and periosteum over denuded bone demands soft tissue coverage. Exposed bone often ensues chronic infection and requires free flap transplantation which surely covers defects in one stage operation and enhances transport of oxygen-rich blood and converts a non-osteogenic or partially osteogenic site into a highly osteogenic site, but exposed bone which had performed free flap transplantation sometimes necroses and needs secondary bone procedure. Scar contracture limits joint motion should be excised and covered with normal soft tissue to restore normal range of motion. Authors have performed the large latissimus dorsi myocutaneous free flap in 8 cases of extensive soft tissue defect and exposed bone lesion in the leg and 1 case of the flap was failed. The secondary ilizarov bone procedure was performed in 3 of 8 cases. 2 cases of large burn scar contracture and 1 case of posttraumatic scar contracture in lower extremity were restored with the large latissimus dorsi myocutaneous free flap. Authors concluded that large latissimus dorsi myocutaneous free flap is the most acceptable microvascular procedure in large soft tissue defect combined with exposed periosteum and bone requiring secondary bone procedure and in large burn scar contracture limiting knee joint motion.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2006년도 공동학술대회 논문집
• /
• pp.131-135
• /
• 2006

본 논문에서는 가우스 뉴튼법을 이용한 중합전 탄성파 자료의 파형역산에 관한 연구를 수행하였다. 탄성파 파형역산에 가우스 뉴튼법을 적용하는 방법은 80년대에 제시되었으나 최근 들어서야 활발히 연구가 진행되고 있는데 이는 연산 능력과 기억용량의 한계에 기인한 것이다. 이를 극복하기 위해 본 연구에서는, 파동 전파 수치모의와 역산과정에서 각각 다른 크기의 격자간격을 사용하고, 필요한 시간영역의 파동전파 모사와 가상 진원의 근사를 통해 편미분 파형을 계산하였으며, 효과적으로 슈퍼컴퓨터를 활용하기 위해 병렬처리 기법을 사용하였다. 수치모의를 통해, 가우스 뉴튼법을 이용한 파형 역산의 수렴속도가 빠르고 정확한 것을 알 수 있었으며, 이를 통해 본 연구에서 제시한 방법의 실제 탄성파 자료를 이용한 역산에의 적용가능성을 확인하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권2호
• /
• pp.295-302
• /
• 2011

Almost half of New Zealand's greenhouse gas emissions arise from agriculture and enteric methane ($CH_4 $) emissions arising from ruminant animals constitute 30% of total $CO_2$-e emissions. Enteric $CH_4$ emissions have increased by 9% since 1990. Extensive research has been undertaken to develop reliable methods for measuring enteric $CH_4$ emissions. New Zealand studies using the SF6 tracer technique suggest that on average this technique yields similar values to the 'gold' standard of calorimetry, but with a larger variance. National inventory estimates based on results obtained using the $SF_6$ technique will therefore overestimate the uncertainty. Mitigating emissions can be achieved by changing feed type but there are practical and cost barriers to the use of alternative feeds. Forages containing condensed tannins do reduce emissions but are agronomically inferior to the forages currently used. Rumen additives have shown some success in-vitro but results from in-vivo trials with both monensin and fumaric acid have been disappointing. The development of methods for directly manipulating rumen microorganisms are at an early stage and work to develop vaccines that can inhibit methanogenesis has yielded mixed results. The successful identification of sheep with contrasting $CH_4$ yields raises the possibility that, in the long term, a breeding approach to $CH_4$ mitigation is feasible.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.778-782
• /
• 2000

Deep drawing and ironing are the major process used today in manufacturing of battery case used in cellular phone and IMT-2000 from aluminum. The same technology is utilized in manufacturing of steel or aluminum rectangular cans for components of medical instrument, portable PC, walkman and so on. Most of these processes require multi-stage ironing following the deep drawing and redrawing processes. The practical aspects of this technology are well known and gained through extensive experiment and production know-how. However, the fundamental aspects of theses processes are relatively less known. Thus, it is expected that process simulations using FEM techniques would provide additional detailed information that could be utilized to improve the process condition. This paper illustrates the application of process modeling to deep drawing and redrawing operations with the cellular phone and IMT-2000. A commercially avaliable finite element code LS-DYNA3D was used to simulate deep drawing and redrawing operations.

• 한국의류산업학회지
• /
• 제14권1호
• /
• pp.75-82
• /
• 2012

Compared to off-line, on-line word-of-mouth has fast dissemination speed and extensive effects based on interactive features. Moreover, in the age of Web 2.0, on-line media has made consumers evolve from simple purchasers to producers, who intervene into product manufacturing through on-line WOM. According to this, this study is conducted to clarify how consumer's prosumer propensity affects WOM in detail when purchasing fashion products on-line through website interactivity and perceived usefulness of WOM. The results are as follows. 1. Consumer's prosumer propensity is classified in four dimensions: the propensity to participate, the propensity to relate, the propensity to amuse and the propensity to create. 2. The sample has shown low prosumer propensity overall, and there were no gender differences. 3. Testing structural equation model, it was clarified that the higher the consumer's prosumer propensity, the higher the consumer's evaluation of website interactivity and thus the greater the WOM effect through its perception of usefulness. 4. There were some differences in the path of structural equation model according to consumer's prosumer propensity. From the results, it can be concluded that consumer's prosumer propensity is a key factor in the on-line WOM. Therefore fashion businesses should actively utilize consumer's prosumer propensity to apply their opinion in the product planning stage or use it as the means of company-friendly viral marketing.

• Archives of Plastic Surgery
• /
• 제42권1호
• /
• pp.73-77
• /
• 2015

The latissimus dorsi flap is popular due to the versatile nature of its applications. When used as a pedicled flap it provides a robust solution when soft tissue coverage is required following breast, thoracic and head and neck surgery. Its utilization as a free flap is extensive due to the muscle's size, constant anatomy, large caliber of the pedicle and the fact it can be used for functional muscle transfers. In facial palsy it provides the surgeon with a long neurovascular pedicle that is invaluable in situations where commonly used facial vessels are not available, in congenital cases or where previous free functional muscle transfers have been attempted, or patients where a one-stage procedure is indicated and a long nerve is required to reach the contra-lateral side. Although some facial palsy surgeons use the trans-axillary approach, an operative guide of raising the flap by this method has not been provided. A clear guide of raising the flap with the patient in the supine position is described in detail and offers the benefits of reducing the risk of potential brachial plexus injury and allows two surgical teams to work synchronously to reduce operative time.

• Imaging Science in Dentistry
• /
• 제42권4호
• /
• pp.265-270
• /
• 2012

Primary intraosseous squamous cell carcinoma (PIOSCC) is a rare carcinoma, which arises within the jaws without connection to the oral mucosa and presumably develops from a remnant of odontogenic epithelium. We present a case of solid type PIOSCC in a 52-year-old male patient complaining of dull pain on his left lower molar. In this case, early stage PIOSCC mimicking a periapical lesion might lead to a one-year delay in treatment due to the misdiagnosis of osteomyelitis after extraction of the third molar. The clinical, radiological, and histologic features are described. In this case, there was initial radiographic evidence for PIOSCC mimicking a periapical lesion. Incautious radiographic interpretation and treatment procedures had delayed the correct diagnosis and resulted in extensive bony destruction during the patient's disease progression.