• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.646-651
• /
• 2004

Crashworthy design of a train is a systematic approach to ensure the safety of passengers and crews in railway transportation for the prescribed accident scenarios. This approach needs new structural arrangements and designs to absorb higher levels of impact energy in a controlled manner and interior designs to minimize passenger injuries. In this paper, crashworthy design approach is applied to the tilting train express (TIX) design which is newly being developed. Based on a head-on collision and a level crossing collision scenarios, the crash behaviors of a TTX design candidate arc evaluated numerically using the finite element method. Finally, design alternatives which show better crashworthy performances are proposed and verified through the full-rake collision simulations.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.586-590
• /
• 2005

In order to compare the dynamic loading effects of particular trains it is necessary to use methodology that separates the two inherent aspects of the dynamic response of the total dynamic system-the characteristics of the train and a bridge. Because the train signature profile is a function of axle spacing and axle loads, it can be calculated which is independent of the characteristics of an individual bridge. Thus the use of the train signature enables a rapid comparison of the effects of different trains to be made. If the magnitude of train signature for a new train type is less than of existing trains on a route then the route will be satisfactory for the new train. This study presents a quantitative analysis of the dynamic loading effects for various domestic real trains-PMC8, PMC16, Mugunhwa passenger coach, several freight coach, KTX and TTX(Tilting Train Express)- Using the train signature.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.810-813
• /
• 2003

The present headway on KNR(Korea National Railway) lines varies from 6 to 10 minutes depending on the each line and by the operation of High Speed line in 2004, the bottleneck would be expected within a few sections such as Daejeon-Daejeon shunting yard which will be the common mute between KTX(Korea Train Express) and conventional trains. Therefore, KNR would like to reduce the headway of the all lines by 4 minutes with the implementation of ERTMS/ETCS on-board system. Where ETCS(European Train Control system), the subsystem of ERTMS, is Automatic Train Protection system for safety train running. This study will be analyze expected braking distance and running time depending on characteristics of conventional passenger and freight trains and high speed train will be operated within electrified conventional line for comparing the headways of ATS(Automatic Train Stop) system and ETRMS/ETCS system within the Daejeon-Daejeon shunting yard section.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.359-366
• /
• 2009

This paper aims for analyzing the vibration serviceability of train by simply expressing its vertical vibration when it passes a railway bridge. For this purpose, bridge-train transfer function was derived and bridge-train interaction analysis was performed by using the derived function. The bridge-train transfer function was developed with the assumption that train is a single mass-spring system, and bridge-train interaction analysis was performed on simple beams of KTX passenger car. The vertical acceleration signals of passenger cars obtained from bridge-train interaction analysis were compared with them of cars obtained from the bridge-train transfer function. As a result, it could be estimated to express the vertical vibration inside the passenger car required for vibration serviceability evaluation by using the vertical vibration of bridges obtained from moving load analysis. Therefore, it may be possible to evaluate the vibration serviceability of railway bridges considering bridge-train interaction effect.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4D
• /
• pp.679-686
• /
• 2006

Recently, the city railway in the Seoul Metropolitan Area (SMA) has offered a low quality of service as a passage time, because it was operated slowly. So, the people who live in modern society are not satisfied about passage time, therefore, this study tried to make that the subway in the SMA becomes a more functional and effective wide-area-transportation-network through an express train introduction's method which examined cases from abroad and current system. and then presented how express train could be applied to current system. In a case study, We used the An-San Line and Su-In Line as a examples and developed a schedule which can minimize the delaying time of subway by using Branch & Bound Algorithm. The train operational plan was loaded to consider a railroad siding, Obtained site, and the dispatch interval(three to ten minutes) for the express and local lines and finally, We presented an alternative operational plan which made by those factors.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.361-366
• /
• 2001

The present study describes a practical estimation procedure about the pantograph under several severe aerodynamic load conditions. As the operating speed of the Korean Train Express(KTX) reaches 350km/h, structural safety at various conditions should be examined at the design stage. In the present study, a compact and reliable procedure is developed to get aerodynamic loads on each part of the pantograph regarding the typhoon condition, the train/tunnel interaction, the train/train interaction and the side wind condition. In the estimation procedure, 3-dimensional steady and unsteady CFD simulation around the high speed train facilitates assigning the external local flow condition around the pantograph. The procedure is verified using the results of the low speed wind tunnel test at JARI and applied to 7 flow conditions and 4 operation configurations.

• Journal of the Korean Society for Railway
• /
• v.10 no.5
• /
• pp.540-545
• /
• 2007

The tilting train is able to tilt its body towards the center of the turning radius, preventing roll-over of the train as it runs on a curved rail at high-speed. This train, widely accepted for commercial purpose internationally, is very beneficial in that the operating time is shortened without much capital investment to the infrastructure where there are many curved rails. Over several years, the Korea Railroad Research Institute (KRRI) has developed such a train. In this paper, the safety of the Korean tilting train express (TTX) is investigated using a dynamic simulation model. Since proper safety standards have not been established for the TTX, those for the Korean train express (KTX) is employed to analyze the safety and ride comfort of the TTX. This study is useful in predicting the behavior of the TTX and ride comfort, and conforms that designed TTX is stable enough to satisfy the safety standards. It would be useful to recommend proper normal operating speed and determine the maximum safety speed, according to the result. Furthermore, it would be possible to provide basic reference data when analyzing the dynamic effect of the catenary system and the fatigue of the bogie.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.3 no.2
• /
• pp.119-126
• /
• 1983

The purposes of this study are to analyze/model the mode choice behavior of the regional traveler by express bus/express train and to offer useful source in deciding the public transportation policy. The data analyzed were trips of both modes from March, 1980 to November, 1981, between Seoul and other nineteen cities; the data were grouped as five groups according to the change of service variables. Service variables were travel time(unit: minute), cost(:won), average allocation time(:won), service hour(:hour), and dummy variables by mode. As model Logit Model with linear or log utility function were postulated. As the result of this study, some reseanable models were constructed at Model Type I(eq. 2. of this paper) based on the above data except the dummy. It was judged that the parameters calibrated by Group III and Group IV data in table 4, were optimal. Among the parameters, the parameter of travel cost was most reliable. There was a tendency preferring express bus to train in October and November. With the constructed model and Pivot-Point Method. the demand change of express train caused by the service variables' change could be forecasted over 99%.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.11 s.188
• /
• pp.85-92
• /
• 2006

For the improvement of a conventional railway speed, tilting train(Tilting Train express) is under the development aiming for a maximum speed 180km/h. Compared to the existing conventional rolling-stock, tilting train could take an advantage of speed improvement about $20{\sim}30%$ on curve sections due to the improvement of cowing performance. However, this speed increasement creates a severe load at wheels, thus it is necessary to study the safety of wheel for tilting train preferentially. On the other hand, it is under consideration that the wheel for conventional railway rolling-stock at speeds of 150km/h will be applied to tilting train at speeds of 180km/h. In this paper, we have studied the strength of wheel structure, the geometrical contact characteristics, and the dynamic performance of wheel to evaluate the safety of wheel for tilting train.

• Journal of the Korean Society for Railway
• /
• v.13 no.1
• /
• pp.125-130
• /
• 2010

The government makes an effort to disperse the centralization of Seoul through the its surroundings development for relieving the various social problems caused by the capital region concentration. But, the planless rail system development in the capital region have made it difficult to approach into Seoul city center from its surroundings. Through Seoul metro line 9, constructed by private company first in Korea, that has operation plan with normal and express train together, we would like to study up on promotion of passenger service quality such as "the improvement of the accessibility to Seoul city center from its surroundings" and "service of various pattern of trains".