• 한국환경과학회지
• /
• 제18권10호
• /
• pp.1171-1179
• /
• 2009

The solitary ascidian, Halocynthia aurantium, which is commonly called the sea peach because of its coloration and general shape, is a valuable organism of benthic marine population in the northern region of the East Sea, Korea. It is seldom found at a depth of less than 10 meters and the sea peach is frequently observed in large populations between 20 and 100 meters. It appears to prefer attachment to vertical rocks faces and artificial cement blocks exposed to the currents. Mass mortality and reduction of resources in sea peach, H. aurantium, were occurred in the benthic area of the northern region of the East Sea because of the rapid fluctuation of environmental factors such as temperature and salinity due to mass rainfall in summer and going up north of a strong warm current in winter. Therefore, we examined the effects of temperature and salinity on embryonic development of fertilized eggs, tadpole larva to metamorphosis, and attachment to siphon development. Laboratory-raised larvae were studied using a two-factorial experimental design with four levels of temperature(8, 12, 16 and $20^{\circ}C$) and four levels of salinity(20, 25, 30 and 34 psu). The ascidian larvae of H. aurantium survived environmental conditions between temperature of $8{\sim}20^{\circ}C$ and salinity of 25~34 psu and exhibited positive growth at $8{\sim}16^{\circ}C$ and 30~34 psu. Fertilized eggs have not developed at lower salinity of 20 psu irrespective of temperature range tested and have showed an abnormal development at the salinity of 25 psu between higher temperatures of 20 and $24^{\circ}C$. This result suggests that temperature increase and salinity reduction depending on environmental fluctuation may have significant impacts on population variation of H. aurantium in the northern region of the East Sea.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권8호
• /
• pp.1159-1163
• /
• 2006

This experiment was performed to examine the influences of high ambient temperature on milk production, nutrient digestibility, energy and protein sufficiency ratio, and plasma metabolites concentration in lactating cows. In a $2{\times}2$ crossover design, four multiparous lactating Holstein cows were maintained in a chamber under treatment of constant moderate ($18^{\circ}C$) ambient temperature (MT) or high ($28^{\circ}C$) ambient temperatures (HT). The DMI and milk protein yield were significantly lower in HT (p<0.05). The milk yield, milk lactose yield, and milk SNF yield tended to be lower in HT (p<0.10). No statistical differences for 4% fat-corrected milk and milk fat yield were observed. Rectal temperatures were significantly higher in HT than MT (p<0.05). The apparent DM, OM, ether extract, CF, and ash digestibility did not differ between treatments. On the other hand, the apparent CP digestibility was increased significantly (p<0.05) and nitrogen free extract tended to increase (p<0.10) in HT. The sufficiency ratio of ME and DCP intake for each requirement tended to be lower in HT than in MT (p<0.10). Concentrations of total protein (TP), albumin, and urea nitrogen in plasma did not differ between treatments. Plasma 3-methylhistidine (3MH) concentration as a marker of myofibrillar protein degradation tended to be higher in HT (p<0.15). In conclusion, high ambient temperature was associated with a lower energy and protein sufficiency ratio, and decreased milk protein production, even though the body protein mobilization tended to be higher.

• 한국제4기학회지
• /
• 제6권1호
• /
• pp.13-19
• /
• 1992

한국반도와 중국은 황해(서해)를 둘러싸고 있으므로 황해를 중앙에 두고 동쪽에는 한국반도, 서쪽과 북쪽에는 중국이 위치하고 있다. 따라서 황해는 남쪽으로 터져 있는 반 폐쇠적인 바다이며 해양학적으로 특유의 바다이다. 즉 semi-enclosed epicontinental sea(반폐쇠적 대륙붕 바다)이며 주위의 육지로부터 상당한 쇄설물질을 받아들이는 바다로서, 현재의 지구의 여러가지 해양환경 조건중에서도 대단히 특이한 특성을 가진 바다이다. 황해는 평균 수심이 약 45m 이며 고유 냉수괴를 바다중심에 갖고 있고 한국반도쪽의 해안과 중국쪽의 해안에 각각 다른 해류가 흐르고 있다. 황해 해저의 지형과 황해를 둘러싼 육지의 해안 지형의 효과에 의하여 한국반도의 연근해역은 대단히 큰 조차(tidal range)를 나타내고 있고 이것이 또한 황해 연안 해양환경의 특징을 이룬다. 지난 수천년 동안의 황해권 또는 황해연안 지역의 환경과 문화를 해석하고 공부하는데는 과학적인 해양학측면의 황해해역 해양특성을 알아야 할 것이며 바다를 통한 문화와 경제의 교류는 바다의 영향을 대단히 크게 받았을 것으로 사료된다. 현재의 해수면 위치 즉, 해안선이 현재의 자리를 잡고 "황해"라는 바다가 오늘의 모습을 갖추는데는 약 15,000년의 시간이 필요했고 이때는 제4기 (Quaternary)의 마지막 빙하기 (예컨데 Wisconsin 빙하기 또는 Wurm 빙하기)이후 부터의 간빙기 (interglacial)인 것이다.ial)인 것이다.

• 대한전자공학회논문지SP
• /
• 제46권6호
• /
• pp.146-152
• /
• 2009

강관튜브를 엑스레이 선원의 방사선에 노출 시, 투과방사선은 통상 필름이나 근래 많이 사용되는 CR의 영상판 등에 검출된다. 검출된 방사선은 대상체의 양면 영역을 중복하여 관통하여 방사선 영상에는 내외부 매질 상태가 겹쳐서 나타나며 동시에 방사선 투과와 기하학적 배치에 기인한 비선형 왜곡이 영상에 반영된다. 본 논문에는 강관튜브 CR영상으로부터 영상을 복원하는 해석적 접근법을 제시한다. 방사선 강도, 매질에서의 흡수 및 방사선 입사에 따른 시준(視準)성분들과 연관된 기하학적 사양 등으로부터 특징 파라미터를 추출하여 원형인 강관튜브의 두 영역에서의 영상을 복원한다. 보정절차를 통해 실제 튜브에 근접한 영역 복구를 설계한다. 이러한 접근법을 CR영상에 적용하여 유용성을 확인한다.

• Bulletin of the Korean Chemical Society
• /
• 제31권6호
• /
• pp.1615-1620
• /
• 2010

Bis-[dipyrido[3,2-$\alpha$:2',3'-c]phenazine)$_2$(1,10-phenanthroline)$_2Ru_2$]$^{2+}$ complexes (bis-Ru(II) complexes) tethered by linkers of various lengths were synthesized and their binding properties to DNA investigated by normal absorption and linear dichroism spectra, and fluorescence techniques in this study. Upon binding to DNA, the bis-Ru(II) complex with the longest linker (1,3-bis-(4-pyridyl)-propane), exhibited a negative $LD^r$ signal whose intensity was as large as that in the DNA absorption region, followed by a complicate $LD^r$ signal in the metal-to-ligand charge transfer region. The luminescence intensity of this bis-Ru(II) complex was enhanced. The observed $LD^r$ and luminescence results resembled that of the [Ru(1,10-phenanthroline)$_2$ dipyrido[3,2-$\alpha$:2',3'-c]phenazine]$^{2+}$ complex, whose dipyrido[3,2-$\alpha$:2',3'-c]phenazine (dppz) ligand has been known to intercalate between DNA bases. Hence, it is conclusive that both dppz ligands of the bis-Ru(II) complex intercalate. The binding stoichiometry, however, was a single intercalated dppz per ~ 2.3 bases, which violates the "nearest binding site exclusion" model for intercalation. The length between the two Ru(II) complexes may be barely long enough to accommodate one DNA base between the two dppz ligands, but not for two DNA bases. When the linker was shorter (4,4'-bipyridine or 1,2-bis-(4-pyridyl)-ethane), the magnitude of the LD in the dppz absorption region, as well as the luminescence intensity of both bis-Ru(II) complexes, was half that of the bis-Ru(II) complex bearing a long linker. This observation can be elucidated by a model whereby one of the dppz ligands intercalates while the other is exposed to the aqueous environment.

• 암석학회지
• /
• 제25권3호
• /
• pp.253-260
• /
• 2016

2010년 2월 9일 수도권에서 모멘트 규모 3.1 지진이 발생했다. 수도권 지역에서는 계기지진 관측이 시작된 후 오랫동안 유감지진 보고가 없었기 때문에, 이 지진은 수도권의 지진 위험성과 위해성을 상기시키는 계기가 되었다. 수도권은 약 2천 5백만 명의 인구밀집지역으로서 인구수 측면에서 본다면 세계에서 가장 큰 대도시 중 하나이다. 이 지진이 발생한 위치에서 규모 6.5의 지진이 발생했음을 가정하여 지진동을 시뮬레이션 해보면, 많은 인구와 구조물의 취약성으로 인하여 서울을 포함한 수도권 지역은 매우 심각한 위해성을 가지고 있을 것으로 생각된다. 본 연구의 동기를 제공한 시흥 지진이 피해를 야기할 수 있는 주요 지진으로 간주될 수는 없지만, 이 지역의 역사적 지진기록과 최근 지진발생 현황에 비추어 볼 때 그 중요성을 간과해서는 안 된다. 또한 수도권처럼 지진발생이 많지 않은 곳에서는 기존의 지진관측망으로 감시하는 지진보다 작은 규모의 지진을 지진위험성 및 위해성 평가에 사용할 것을 제안한다.

• 한국표면공학회지
• /
• 제54권5호
• /
• pp.248-259
• /
• 2021

This study examined the influence of post weld heat treatment (PWHT) conditions on corrosion behaviors of laser-welded super duplex stainless steel tube. Due to the high cooling rate of laser welding, the phase fraction of ferrite and austenite in the weld metal became unbalanced significantly. In addition, the Cr₂N particles were precipitated adjacent to the fusion line, which can be susceptible to the localized corrosion. On the other hand, the phase fraction in the weld metal was restored at a ratio of 5:5 when exposed to temperatures above 1060 ℃ during the post weld heat treatment. Nevertheless, the high beltline speed during the PWHT, leading to the insufficient cooling rate, caused a precipitation of σ phase at the interface between ferrite/austenite in both weld metal and base metal. This resulted in the severe corrosion damages and significant decrease in critical pitting temperature (CPT), which was even lower than that measured in as-welded condition. Moreover, the fraction of σ phase in the center region of post weld heat treated steel tube was obtained to be higher than in the surface region. These results suggest that the PWHT conditions for the steel tube should be optimized to ensure the high corrosion resistance by excluding the precipitation of σ phase even in center region.

• 융합정보논문지
• /
• 제9권10호
• /
• pp.87-93
• /
• 2019

치유 물질인 아마인유에 형광 물질을 소량 혼합한 혼합물을 코어 성분으로 하여 마이크로캡슐을 제조하였다. 이 마이크로캡슐을 코팅재 조성물에 균일하게 분산시켜 모르타르 표면에 도포함으로써 지기치유 보호코팅재를 제작하였다. 이 코팅재에 약 $100{\mu}m$ 폭의 스크래치 또는 균열 손상을 발생시킨 후 자외선을 조사하면서 관찰한 결과, 캡슐 함량이 증가할수록 형광 발광의 범위가 증가하였고, 20wt% 이상의 캡슐을 함유한 코팅재에서는 손상 부위가 치유물질로 거의 채워진 모습을 나타내었다. 물흡수도 시험 결과 20wt% 이상의 캡슐을 함유한 코팅재는 약 85%의 치유효율을 보였다. 손상 부위에서 나타나는 형광은 3m의 거리에서도 용이하게 식별되었다. 본 연구결과는 콘크리트 보호를 위한 마이크로캡슐형 자기치유 코팅재의 치유기능을 육안으로 용이하게 확인하는데 도움을 줄 것으로 기대된다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.470-473
• /
• 2009

In this paper, back pressure forging processes of which back pressures are exerted by mechanical forces including spring reaction are simulated by three-dimensional finite element method. The basic three-dimensional approach extended from two-dimensional approach is accounted for. An axisymmetric backward and forward extrusion process having a back pressing die, which is exposed to oscillation of forming load due to variation of reduction ratios with stroke and its related frequent variation of major deforming region, is simulated by both two and three dimensional approaches to justify the presented approach by their comparison. A three-dimensional forging process having a back pressing die attached to the punch by a mechanical spring is simulated and the results are investigated to reveal accuracy of the presented approach.

• Corrosion Science and Technology
• /
• 제10권3호
• /
• pp.95-100
• /
• 2011

Protective coatings play an important role in the protection of metallic structures against corrosive environment. The main function of anticorrosive coating is to prevent the materials from corrosive agents, such as water, oxygen and ions. In the study, the corrosion protection properties of urethane and epoxy coating systems were evaluated using EIS methods exposed to the corrosion acceleration test such as Norsok M501, Prohesion and hygrothermal cyclic test. AFM analysis of the coating systems was carried out to monitor the change of roughness of coatings. Urethane coating system was more stable than the epoxy coating under given cyclic conditions. Water uptake into the urethane coatings was less than that into the epoxy coating. The urethane coating system showed better corrosion protection than epoxy coating system based on the changes of the impedance modulus at low frequency region with exposure time. Consequently, the corrosion protection properties of the epoxy and urethane coatings was well correspond with their surface roughness changes and water uptakes.