• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.36-38
• /
• 2003

In this paper, It was evaluated that the customer's effects of momentary voltage sag in power distribution system considering reclosing interval. Above all, power quality problems were discussed widely, various international standards about power quality were compared to each other. after the continuous voltage sag waves of power distribution system on fault were induced, the experimentation about voltage sag for critical load was performed using source simulator. The results of experimentation were displayed as the form of 2 and 3-dimensional CBEMA Curve.

• 한국기계가공학회지
• /
• 제10권6호
• /
• pp.70-76
• /
• 2011

This paper presents an optimization procedure for reducing warpage of injection molded part by using a volumetric shrinkage deviation as an objective function. A design of experiments based on orthogonal arrays was used in the optimization procedure, and the entire optimization was performed through a two stage process - a preliminary experimentation and a principal experimentation. Proposed optimization method was applied to the design of a CPU-base part in computer. With the moderate number of experiments, an optimal molding condition for uniform distribution of volumetric shrinkage was obtained, as a result, the warpage of the molded part was significantly reduced.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.99-100
• /
• 2007

Transferring patterns from mold to PDMS stamp is very useful technology in micro-fabrication, complex and three-dimensional structures. First experimentation, mold's patterns wens transferred to PDMS stamp. Comparing with PDMS stamp and Mold, patterns were transferred about 97.9%. Second experimentation, PDMS stamps were made several times by only one mold, scale and distance of transferred patterns were uniform about 89.3%. We proved that transferring patterns from mold to PDMS stamp is accurate. The uniformity of stamps is the same after mold was used several times. Transferring patterns from mold to PDMS stamp has uniformity and accuracy, it will be useful technology.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.454-457
• /
• 2005

Voloxidizer for hot cell demonstration that handle spend fuel of high radiation virulence in limited space should become a small size and not scatter in its exit. This study determine optimum velocity of $U_3O_8$ using Newton-Raphson Method. We have conducted fortran programing on the Newton-Raphson Method, obtained a theory results and, predicted optimum velocity on the particle size distribution of $U_3O_8$. We have conducted experimentation using acrylic experimental device for verification of theory method, sampled and analyzed using the particle size analyzer In the results, we have found maximum $5\~7\%$ error rate in the comparative value of theory and experimentation. Optimum velocity and experimental results of $U_3O_8$ for scatter prevention have applied for design of demonstration voloxidizer, and produced operation condition of voloxidizer.

• Toxicological Research
• /
• 제25권1호
• /
• pp.9-15
• /
• 2009

Historically, research in toxicology has utilized non-human mammalian species, particularly rats and mice, to study in vivo the effects of toxic exposure on physiology and behavior. However, ethical considerations and the overwhelming increase in the number of chemicals to be screened has led to a shift away from in vivo work. The decline in in vivo experimentation has been accompanied by an increase in alternative methods for detecting and predicting detrimental effects: in vitro experimentation and in silico modeling. Yet, these new methodologies can not replace the need for in vivo work on animal physiology and behavior. The development of new, non-mammalian model systems shows great promise in restoring our ability to use behavioral endpoints in toxicological testing. Of these systems, the zebrafish, Danio rerio, is the model organism for which we are accumulating enough knowledge in vivo, in vitro, and in silico to enable us to develop a comprehensive, high-throughput toxicology screening system.

• Advances in Computational Design
• /
• 제3권1호
• /
• pp.49-69
• /
• 2018

This paper shows an optimal design for reinforced concrete rectangular combined footings based on a criterion of minimum cost. The classical design method for reinforced concrete rectangular combined footings is: First, a dimension is proposed that should comply with the allowable stresses (Minimum stress should be equal or greater than zero, and maximum stress must be equal or less than the allowable capacity withstand by the soil); subsequently, the effective depth is obtained due to the maximum moment and this effective depth is checked against the bending shear and the punching shear until, it complies with these conditions, and then the steel reinforcement is obtained, but this is not guaranteed that obtained cost is a minimum cost. A numerical experimentation shows the model capability to estimate the minimum cost design of the materials used for a rectangular combined footing that supports two columns under an axial load and moments in two directions at each column in accordance to the building code requirements for structural concrete and commentary (ACI 318S-14). Numerical experimentation is developed by modifying the values of the rectangular combined footing to from "d" (Effective depth), "b" (Short dimension), "a" (Greater dimension), "${\rho}_{P1}$" (Ratio of reinforcement steel under column 1), "${\rho}_{P2}$" (Ratio of reinforcement steel under column 2), "${\rho}_{yLB}$" (Ratio of longitudinal reinforcement steel in the bottom), "${\rho}_{yLT}$" (Ratio of longitudinal reinforcement steel at the top). Results show that the optimal design is more economical and more precise with respect to the classical design. Therefore, the optimal design presented in this paper should be used to obtain the minimum cost design for reinforced concrete rectangular combined footings.

• 한국시뮬레이션학회논문지
• /
• 제32권1호
• /
• pp.23-34
• /
• 2023

본 논문의 목적은 이항출력 실험을 이용할 경우에 확률적 전역 최적화 방법론들을 검토하고 알고리즘들간의 성능을 비교하기 위한 것이다. 모 성공확률은 알수 없고 확률적 특성을 갖기 때문에 확률적 전역 최적화 방법론에서는 모 성공확률 대신 성공확률의 추정치를 이용한다. 언덕오르기 알고리즘 , 단순랜덤탐색, 랜덤재출발 랜덤탐색, 랜덤 최적화, 담금질 기법 및 군집기반의 알고리즘인 입자 군집 최적화 알고리즘을 확률적 전역 최적화 알고리즘으로 사용하였다. 알고리즘의 비교를 위하여 두가지 테스트 함수(하나는 단봉이고 나머지는 다봉임)가 제안되었고 몬테카를로 시뮬레이션을 이용하여 알고리즘의 성능을 평가하였다. 단순 테스트 함수에 대하여는 모든 알고리즘이 유사한 성능을 보이고 있다. 복잡한 다봉의 테스트 함수에 대하여는 랜덤재출발 랜덤최적화, 담금질 기법과 군집 기반의 입자군집 알고리즘이 훨씬 더 좋은 성능을 보임을 알 수 있다.

• 한국과학교육학회지
• /
• 제14권1호
• /
• pp.58-69
• /
• 1994

In this study, with the problem of "What is the desirable illustrations?", the problem points of the existing textbooks were analyzed, and the opinions of experts concerning desirable illustrations were examined through questionaire survey, and by developing 'Analysis Framework of Illustrations', and Korean-Japanese 'science' textbooks were analyzed and compared with. The conclusions for the direction of korean 'science' textbooks are summarized as follows : 1) The numbers of korean illustrations should be more about two than one of per one page of the existing textbooks. 2) The korean illustrations for the 6th grade should be more largely inserted. 3) The more econmic space utilizing measure should be groped for looking at from the such side. 4) Though the kinds of Korean illustrations are mostly composed of photographs, pictures, illustrations, cartoons, etc. should be positively utilized. and the shapes of photographs should be diversified by such as square, round shape,omissions of background and others. 5) The distribution of players by sex should be considered envenly for male and female from the ascendency of male (1.5: 1). 6) It was found that it is desirable for the formation of role of illustrations of 20% for motive inducement, 45% for guidance for experimentation, 30% for presentation of data, and 5% for presentation of the results of experimentation. 7) The illustrations for guidance for experimentation should present important stages of experimentation process regardless the number of illustration. 8) It would be advantageous for motive induction to find the subject matters as possible as from the children's close actual life. 9) It is necessary to induce more freely method in utilizing Printing plate for inserting illustrations. 10) It is the result of research that the existing Korean textbooks are not suitable in inducing interest, and the positive strategy to induce interest is demanded. 11) It is required to select their location freely in accordance with the content regardless the. 12) In order to develop such illustrations, it is required to cultivate expert illustrators, and more economic investment is required for development of illustrations. The emphasis matters of revision of the 6th educational process of 'Inducement of study motive and emphasis on interest' is the change of presenting form and method of illustrations, which is expected to be rewarded with much good fruits.

• 벤처혁신연구
• /
• 제6권2호
• /
• pp.1-19
• /
• 2023

본 연구는 이슈 리더십과 학습민첩성이 스타트업 구성원의 혁신행동에 미치는 영향을 실증분석하기 위해 이루어졌다. 이슈 리더십의 하위요소로는 이슈 창안, 오디언스 몰입, 이슈 실행으로 세분화하였다. 학습민첩성은 피드백 추구성향, 정보지향성, 성찰, 실험성, 민첩성의 5가지로 세분화하였다. 스타트업에 종사하는 구성원을 대상으로 설문 조사를 실시하였며, 본 연구에서는 300개의 유효한 설문을 분석 대상으로 하였다. 가설 검정을 위한 분석은 위계적 회귀분석 방법을 사용하였다. 실증 분석 결과는 다음과 같다. 이슈 리더십의 하위 요소 중 이슈 창안, 오디언스 몰입 및 학습민첩성의 하위 요소 중 정보지향성, 성찰, 실험성, 민첩성은 스타트업 구성원의 혁신행동에 유의한 정(+)의 영향을 미치는 것으로 나타났다. 반면 이슈 리더십의 하위 요소인 이슈 실행과 학습 민첩성의 하위 요소인 피드백 추구성향은 혁신행동에 유의한 영향 관계가 검정되지 않았다. 또한, 혁신행동에 미치는 영향력의 크기는 실험성, 민첩성, 이슈 창안, 정보지향성, 오디언스 몰입, 성찰 순으로 나타났다. 따라서 이슈 리더십과 학습민첩성이 혁신적인 행동에 미치는 영향에 대한 본 연구에서는 이슈 창안, 오디언스 몰입, 정보지향성, 성찰, 실험성, 민첩성 등이 중요한 역할을 한다는 결론을 얻을 수 있었다. 이러한 연구 결과를 바탕으로 본 연구가 가지는 학술적 및 실무적 시사점을 제시하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.425-427
• /
• 1990

This paper provides an overview of system analysis of immunology. The theoretical research in this area is aimed at an understanding of the precise manner by which the immune system controls infectious diseases, cancer, and AIDS. This can help provide a systematic plan for immunological experimentation.