• The Journal of Advanced Prosthodontics
• /
• v.6 no.3
• /
• pp.215-223
• /
• 2014

PURPOSE. This study aimed to develop a copper-aluminium-nickel alloy which has properties comparable to that of dental alloys used for dental post and core applications with the reasonable cost. MATERIALS AND METHODS. Sixteen groups of experimental copper alloys with variants of 3, 6, 9, 12 wt% Al and 0, 2, 4, 6 wt% Ni were prepared and casted. Their properties were tested and evaluated. The data of thermal, physical, and mechanical properties were analyzed using the two-way ANOVA and Tukey's test (${\alpha}$=0.05). The alloy toxicity was evaluated according to the ISO standard. RESULTS. The solidus and liquidus points of experimental alloys ranged from $1023^{\circ}C$ to $1113^{\circ}C$ and increased as the nickel content increased. The highest ultimate tensile strength ($595.9{\pm}14.2$ MPa) was shown in the Cu-12Al-4Ni alloy. The tensile strength was increased as the both elements increased. Alloys with 3-6 wt% Al exhibited a small amount of 0.2% proof strength. Accordingly, the Cu-9Al-2Ni and Cu-9Al-4Ni alloys not only demonstrated an appropriate modulus of elasticity ($113.9{\pm}8.0$ and $122.8{\pm}11.3$ GPa, respectively), but also had a value of 0.2% proof strength ($190.8{\pm}4.8$ and $198.2{\pm}3.4$ MPa, respectively), which complied with the ISO standard requirement (>180 MPa). Alloys with the highest contents of nickel (6 wt% Ni) revealed a widespread decolourisation zone (5.0-5.9 mm), which correspondingly produced the largest cell response, equating positive control. CONCLUSION. The copper alloys fused with 9 wt% Al and 2-4 wt% Ni can be considered for a potential use as dental post and core applications.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.11
• /
• pp.1792-1801
• /
• 2008

This study was to develope the pesticide-proof clothes(PPC) for fruit-grower which has been well known over applied agricultural chemicals. The ergonomic evaluation of PPC were tested in two ways. Male adults volunteered the tests to evaluate the safety to pesticide in the field and the thermal comforts in the climate-chamber($30^{\circ}C$, 60%R.H.). PPC were made of 4 different fabrics. Two of them were on the market(coated non-woven and coated nylon). Others were water-repellent treatment and coated waterproof film by developed polyester. The field study was conducted for farmers growing apples to evaluate pesticide exposure. In this experiment, we collected data with patch test on the head, chest, back, right upperarm, right forearm, left thigh and left calf. From the results, the developed PPC showed the more excellent comfort than an existing PPC with nylon coated polyurethane. But the developed PPC of water-repellent fabric was penetrated into the PPC. Therefore, we designed the functional pesticide-proof clothes of 2 different developed polyester fabrics(water-repellent treatment in chest, abdomen, the lower of back, waist, and calf; coated waterproof film in head, shoulder, the upper of back, the crotch, hip, upper arm and thigh).

• Journal of KSNVE
• /
• v.7 no.4
• /
• pp.663-668
• /
• 1997

In general, the noise of alternator is generated by structure of attachment and structural characteristics of alternator itself. In this paper, general phenomena and causes of alternator noise have been considered. Especially, electromagnetic noise source of alternator has been discussed by consideration about the vibration of stator teeth. Also experimental method and simulation method have been used for the proof.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.11
• /
• pp.100-107
• /
• 2003

This paper represents a disturbance compensation control for attenuating disturbance responses. In the consideration of the requirements on the model accuracy in the model based compensator designs, an experimental feed forward compensator design based on adaptive estimation by Filtered-x least mean square (FXLMS) algorithm is proposed. The convergence properties of the FXLMS algorithm are discussed and its conditions for the asymptotic convergence are derived theoretically. The effectiveness of the proposed method and the theoretical proof are verified by computer simulation.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.181-185
• /
• 2003

The composite structural system with reinforced concrete column and steel beam has some advantages in the structural efficiency by complementing the shortcomings between the two systems. The system, however, has also a lot of problems in earthquake-proof capacity and construction process because it is wet method of construction. So, this paper proposed PCS(Precast Concrete Column and Steel Beam) structural system with dry method of construction. Purpose of this study is to enhance merit and control failure mechanism by installing Dog-Bone on H-beam.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.310-312
• /
• 2009

The heterodyne laser interferometer has been widely used in precise measurement field. However, the accuracy is limited by the nonlinearity error caused from incomplete laser sources and nonideal optical components. In this paper, we propose the Dual-EKF which estimates states and weights simultaneously to improve the resolution of heterodyne laser interferometer. As a proof, we demonstrate the effectiveness of our proposed method through experimental results.

• Smart Structures and Systems
• /
• v.12 no.1
• /
• pp.1-22
• /
• 2013

Magnetic nanoparticle based bioseparation in microfluidics is a multiphysics phenomenon that involves interplay of various parameters. The ability to understand the dynamics of these parameters is a prerequisite for designing and developing more efficient magnetic cell/bio-particle separation systems. Therefore, in this work proof-of-concept experiments are combined with advanced numerical simulation to design and optimize the capturing process of magnetic nanoparticles responsible for efficient microfluidic bioseparation. A low cost generic microfluidic platform was developed using a novel micromolding method that can be done without a clean room techniques and at much lower cost and time. Parametric analysis using both experiments and theoretical predictions were performed. It was found that flow rate and magnetic field strength greatly influence the transport of magnetic nanoparticles in the microchannel and control the capturing efficiency. The results from mathematical model agree very well with experiments. The model further demonstrated that a 12% increase in capturing efficiency can be achieved by introducing of iron-grooved bar in the microfluidic setup that resulted in increase in magnetic field gradient. The numerical simulations were helpful in testing and optimizing key design parameters. Overall, this work demonstrated that a simple low cost experimental proof-of-concept setup can be synchronized with advanced numerical simulation not only to enhance the functional performance of magneto-fluidic capturing systems but also to efficiently design and develop microfluidic bioseparation systems for biomedical applications.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.1
• /
• pp.67-71
• /
• 2014

The well tightness of the coal mining water-cooling explosion-proof motor results in difficult heat dissipation, high hydraulic pressure is needed to increase the cooling effect. However, high hydraulic pressure may lead motor shell to deform, which makes it difficult to change the motor and maintain the motor unit. The method of adding keyhole caulk weld spots on the outer cooling water jacket was proposed to solve the problem. Based on the elasticity mechanics equations and the principle of finite element method the stresses and the deformations of the traditional and novel outer cooling water jacket were calculated separately. A hydraulic pressure experiment of the both cooling water jackets was constructed. Obviously, the stress and the deformation of the novel cooling water jacket are lower. The experimental result is consistent with the simulation results. It is effective to reduce the stress and the deformation of the cooling water jacket by adding the keyhole caulk weld spots.

• Journal of Korean Society for Quality Management
• /
• v.49 no.4
• /
• pp.527-537
• /
• 2021

Purpose: The purpose of this study was to suggest an improved version of Proof-of-Nonce (PoN) algorithm, which is a distributed consensus algorithm used for block chain system. Methods: First, we used response surface method for design of experiment that is to generate experimental points considering non-linear relationship among variables. Then, we employed overlapped contour plots for visualizing the impact of control variables to performance target. Results: First, we modified the consensus procedure of the existing PoN algorithm by diminishing the content of the exchanged message. Then, we verified the performance improvement of the new PoN algorithm by performing a numerical experiment and paired t-test. Finally, we established new regression models for consensus time and Transactions per second (TPS) and proposed a method for optimizing control variables for obtaining performance target. Conclusion: We could improve the performance of the previous version of PoN algorithm by modifying the content of the exchanged message during 4-steps of consensus procedure, which might be a stepping stone for designing an efficient and effective consensus algorithm for blockchain system with dynamic operation environment.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.3
• /
• pp.720-737
• /
• 2024

Private set intersection cardinality (PSI-CA) is a typical problem in the field of secure multi-party computation, which enables two parties calculate the cardinality of intersection securely without revealing any information about their sets. And it is suitable for private data protection scenarios where only the cardinality of the set intersection needs to be calculated. However, most of the currently available PSI-CA protocols only meet the security under the semi-honest model and can't resist the malicious behaviors of participants. To solve the problems above, by the application of the variant of Elgamal cryptography and Bloom filter, we propose an efficient PSI-CA protocol with high security. We also present two new operations on Bloom filter called IBF and BIBF, which could further enhance the safety of private data. Using zero-knowledge proof to ensure the safety under malicious adversary model. Moreover, in order to minimize the error in the results caused by the false positive problem, we use Garbled Bloom Filter and key-value pair packing creatively and present an improved PSI-CA protocol. Through experimental comparison with several existing representative protocols, our protocol runs with linear time complexity and more excellent characters, which is more suitable for practical application scenarios.