• Clinical and Experimental Reproductive Medicine
• /
• v.41 no.3
• /
• pp.132-136
• /
• 2014

Objective: The presence of sperm-head vacuoles has been suspected to be deleterious to the outcomes of assisted reproductive technology (ART). It is difficult to accurately distinguish morphologically abnormal sperm with vacuoles under a light microscope. This study was performed to analyze the result of the observation of sperm-head vacuoles using Papanicolaou staining under a light microscope and whether the male partner's age affects these vacuoles. Methods: Sperm morphology with vacuoles was evaluated using Papanicolaou staining and observed under a light microscope ($400{\times)$) in 980 men. The normal morphology was divided into three categories (group A, <4% of normal morphology; group B, 4%-14% of normal morphology; and group C, >14% of normal morphology). The criteria for the sperm-head vacuoles were those given in the World Health Organization manual. For the analysis of the age factor, the participants were divided into the following groups: 26-30 years, 31-35 years, 36-40 years, 41-45 years, and 46-50 years. Results: The percentage of sperm-head vacuoles increased with normal sperm morphology (group A vs. groups B, C) (p<0.05). In the case of the age factor, a statistically significant difference was not observed across any of the age groups. Conclusion: A majority of the sperm-head vacuoles showed a statistically significant difference among normal morphology groups. Therefore, we should consider the probability of the percentage of sperm-head vacuoles not increasing with age but with abnormal sperm morphology. A further study is required to clarify the effect of the sperm-head vacuoles on ART outcomes.

• Management & Information Systems Review
• /
• v.36 no.4
• /
• pp.129-148
• /
• 2017

Conventional exhibition management information systems recommend tourist attractions that are close to the place in which an exhibition is held. Some recommended attractions by the location-based recommendation could be meaningless when nothing is related to the exhibition's topic. Our goal is to recommend attractions that are related to the content presented in the exhibition, which can be coined as content-based recommendation. Even though human exhibition curators can do this, the quality is limited to their manual task and knowledge. We propose an automatic way of discovering attractions relevant to an exhibition of interests. Language resources are incorporated to discover attractions that are more meaningful. Because a typical single machine is unable to deal with such large-scale language resources efficiently, we implemented the algorithm on top of Apache Spark, which is a well-known distributed computing framework. As a user interface prototype, a web-based system is implemented that provides users with a list of relevant attractions when users are browsing exhibition information, available at http://bike.snu.ac.kr/WARP. We carried out a case study based on Korean Tourism Organization Linked Open Data with Korean Wikipedia as a language resource. Experimental results are demonstrated to show the efficiency and effectiveness of the proposed system. The effectiveness was evaluated against well-known exhibitions. It is expected that the proposed approach will contribute to the development of both exhibition and tourist industries by motivating exhibition visitors to become active tourists.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.12 no.4
• /
• pp.19-33
• /
• 2008

Dynamic response measurements from natural excitation were carried out for 25- and 42-story buildings to evaluate their inherent properties, such as natural frequencies, mode shapes and damping ratios. Both are reinforced concrete buildings adopting a core wall, or with shear walls as the major lateral force resisting system, but frames are added in the plan or elevation. In particular, shear walls in a 25-story building are converted to frames from the 4th floor level downwards while maintaining a core wall throughout, resulting in a fairly complex structure. Due to this, along with similar stiffness characteristics in the principal directions, significantly coupled and closely spaced modes of motion are expected in this building, making identification rather difficult. By using various state-of-the-art system identification methods, the modal parameters are extracted, and the results are then compared. Three frequency-domain and four time-domain based operational modal identification methods are considered. Overall, all natural frequencies and damping ratios estimated from the different identification methods showed a greater consistency for both buildings, while mode shapes exhibited some degree of discrepancy, varying from method to method. On the other hand, in comparison with analysis results obtained using the initial finite element(FE) models, test results exhibited a significant difference of about doubled frequencies, at least for the three lower modes in both buildings. To improve the correlation between test and analysis, a few manual schemes of FE model updating based on plausible reasons have been applied, and acceptable results are obtained. The advantages and disadvantages of each identification method used are addressed, and some difficulties that might arise from the updating of FE models, including automatic procedures, for such large structures are carefully discussed.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.2
• /
• pp.156-161
• /
• 2012

Purpose : IRMA method for the experimental reagents, as set out in the manual settings for doing and reporting the test results should, in principle. But many of the reagents allows for the setting of the plot does not have a lot of information. Depending on the angle setting of the table make a difference in test results and what settings are best suited to investigate. Materials and Methods : The hospital has Boramae DREAM10, Cobra, SR-300's using the Immunotech TSH reagents have been compared with the measurements. Since then there using EXCEL calculation of the equipment compared with the measurement. Results : In the comparison between each piece of equipment 1.SR-300: DREAM 10 y = 1.1376x - 0.046 (LOG-LOGIT), 2.SR-300: COBRA y = 1.0985x + 0.042 (LOG-LOG) 3.DREAM10: COBRA y = 0.965x + 0.0887 (LOG-LOG) was the result. In all charts the same X, Y axis, X values were good in general when you have. Linear-Logit value of Cobra Dream10 and Excel tends to match the calculated values provided. Conclusion : Is to guide the B / max, B / Total Logit Y axis of the chart is set to draw a look at the value equation when the X-axis LOG a high concentration are disadvantages rising urgently toward the slope. Linear-Logit plots close to the straight line has a curve. If you have a chart to guide on setting AS setting and therefore, set to guide the absence of information on the need to set up the experiment are thought to pass through.

• Journal of Korea Spatial Information System Society
• /
• v.12 no.1
• /
• pp.66-75
• /
• 2010

The authors argues that the current road updating system based on traditional aerial photograph or multi-spectral satellite image appears to be non-user friendly due to lack of the frequent cartographic representation for the new construction sites. Google Earth are currently being emerged as one of important places to extract road features since the RGB satellite image with high multi-temporal resolution can be accessed freely over large areas. This paper is primarily intended to evaluate optimal threshold of RGB pixel values to extract road features from Google Earth. An empirical study for five experimental sites was conducted to confirm how a RGB picture provided Google Earth can be used to extact the road feature. The results indicate that optimal threshold of RGB pixel values to extract road features was identified as 126, 125, 127 for manual operation which corresponds to 25%, 30%, 19%. Also, it was found that display scale difference of Google Earth was not very influential in tracking required RGB pixel value. As a result the 61cm resolution of Quickbird RGB data has shown the potential to realistically identified the major type of road feature by large scale spatial precision while the typical algorithm revealed successfully the area-wide optimal threshold of RGB pixel for road appeared in the study area.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3418-3426
• /
• 2009

The purpose of this study was to investigate the feasibility of field operation protocol for cardiopulmonary resuscitation(CPR) in person with non-traumatic arrest. This study was performed from May 1 through June 27, 2008, and subjects were 150 students who are attending the department of Emergency Medical Service in J and K universities which located in Jeollabuk-do and Jeollanam-do areas. Practical conformance was verified using by nonequivalent control group pretest-posttest design. This study divided into two groups; experimental group that employed field operation protocol and control group that applied conventional CPR protocol, and comparative analyzed statistically the necessary time of the items of each protocol. The results indicated that each performance time of 18 items was reduced over 3 seconds except 5 items(assessment of consciousness, airway control, two times of artificial respiration, check of circulation, and five cycles of CPR). And time of 6 items(intubation, peripheral intravenous line, reassessment of consciousness, pupil reaction, carotid artery pulse, and vital sign) was minimized more than 60 seconds, and total performing time was shortened 110.85 seconds. The results suggested that total performing time in pre and post test where the protocol was applied for two groups showed a statistically significant decrease(t=-6.580, p=.000). Consequently, field operation protocol for cardiopulmonary resuscitation(CPR) in person with non-traumatic arrest will be a available manual which support prompt and accurate decision making, and improve emergency medical service.

• Journal of Broadcast Engineering
• /
• v.5 no.1
• /
• pp.113-122
• /
• 2000

It is sometimes necessary to remove the captions and recover original images from video images already broadcast, When the number of images requiring such recovery is small, manual processing is possible, but as the number grows it would be very difficult to do it manually. Therefore, a method for recovering original image for the caption areas in needed. Traditional research on image restoration has focused on restoring blurred images to sharp images using frequency filtering or video coding for transferring video images. This paper proposes a method for automatically recovering original image using BMA(Block Matching Algorithm). We extract information on caption regions and scene change that is used as a prior-knowledge for recovering original image. From the result of caption information detection, we know the start and end frames of captions in video and the character areas in the caption regions. The direction for the recovery is decided using information on the scene change and caption region(the start and end frame for captions). According to the direction, we recover the original image by performing block matching for character components in extracted caption region. Experimental results show that the case of stationary images with little camera or object motion is well recovered. We see that the case of images with motion in complex background is also recovered.

• Journal of Acupuncture Research
• /
• v.27 no.1
• /
• pp.1-10
• /
• 2010

Objectives : The mechanical properties of Korean electric cupping systems are studied via experimental measurements. The study aimed at establishing the fundamentals of industrialization and systemization of oriental medicine device industry, as well as improving the quality of life for many Koreans. Methods : We reviewed the studies on traditional cupping as well as modern one to fine necessary factors for electric cupping systems. To characterize the mechanical properties of Korean electric cupping systems, we measured the pressure characteristics of commercially available electric cupping system by using an automatic pressure acquisition system and a standard cup. The pumping capability was checked at 40 seconds, and the stability of the suction cup was checked at 600 seconds. We also acquired the noise level of each system in clinical setting. To check the portability of each system, we also measured its physical dimensions. We scrutinized system manuals provided by the system manufacturers. Results : It took less than 5 second to reach the pressure if the connection between the air hose and the vacuum valve of the cupping system was secure. Pressure diminished to no more than 10% for 600s for all systems. Noise levels were 55~70 dB. Increase in pressure was too fast to control for a designated vacuum level except for one product. Conclusions : The Pumping ability of the systems is impressive and reliable. Pressure retention ability of each cup is quite reliable and reproducible. Therefore, their mechanical performances were worthy of recommendation. Some of them had noise level higher than 60 dB and they were bothersome. It was also suggested that the control for low to middle pressure needed to be accomplished by the cupping system.

• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.3
• /
• pp.116-123
• /
• 2007

Despite the number of backlight manufacturer is increased as the market of flat panel display equipments and related development devices is enlarged, the inspection based on the human eye is still used in many backlight production lines. The defects such as particle, spot and scratch on the light emitting surface of the backlight prevent the LCD device from displaying the colors correctly. From that manual inspection it is difficult to maintain the quality of backlight consistently because the accuracy and the speed of the inspection may change with the physical condition of the operater. In this paper we studied on the development of automatic backlight surface defect inspection system. For this, we made up of the computer vision system and we developed the main program with various user interfaces to operate the inspection system effectively. And we developed the image processing module to extract the defect information. Furthermore, we presented the labeling process to reconstruct defect regions using the labeling table and the defect index. From the experimental results, we found that our system can detect all defect regions identified from human eye and it is sufficient to substitute for the conventional surface inspection.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.2A
• /
• pp.137-146
• /
• 2005

IP-based design methodology has been popularly employed for SoC design to reduce design complexity and to cope with time-to-market pressure. Interface modules for communication between system buses and IPs are required, since many IPs employ different protocols. Automatic generation of these interface modules would enhance designer's productivity and IP's reusability. This paper proposes an automatic interface generation system based on FSM generated from the protocol description of IPs. The proposed system provides the library modules for the standard buses to reduce the burdens of describing the protocols for data transfer from/to standard buses. Experimental results show that the area of the interface circuits generated by the proposed system had been increased slightly by 4.5% on the average when compared to manual designs. In the experiment, where bus clock is 100 Mhz and slave module clock is 34 Mhz, the latency of the interface had been increased by 7.1% in burst mode to transfer 16 data words. However, occupation of system bus can be reduce by 64.9%. A chip designer can generate an interface that improves the efficiency of system bus, by using this system.