• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.1
• /
• pp.22-29
• /
• 1999

This paper descrived the changes of peel strength wrinkle recovery and dimensional stability after fusing 4 different wool face fabrics with 3 different fusible interlinings. The fusing condition was conducted by fusing press machine under 4kg.f/cm2 at 15$0^{\circ}C$. To determine the effect of the varous physical properties of the fused fabrics face fabrics and interlinings on the peel strength wrinkle recovery and dimensional stability(hygral expansion and relaxation shrinkage) of fused fabrics correlation among the KES values of fused fabrics face fabrics and interlinings to the peel strength rinkle recovery and dimensional stability of fused fabrics were expeerimentally analyzed,. As the results the peel strength was mainly influenced by the cover factor of face fabric and interlinings. After fusing wrinkle recovery and hygral expansion were decreased. The cover factor wrinkle recovery weight thickness shear rigidity and frictional properties of face fabric and the thickness of fused fabrics were not influence to the wrinkle recovery of fused fabrics. In addition the dimensional stabilities of fused fabrics were mainly influenced by the tensile and frictional properties of the wrinkle recovery of fused fabrics. In addition the dimensional stabilities of fused fabrics were mainly influenced by the tensile and frictional properties of the face fabrics.

• Journal of the Korean Mathematical Society
• /
• v.52 no.2
• /
• pp.333-347
• /
• 2015

In this paper, by using the modular forms of weight nk ($2{\leq}n{\in}\mathbb{N}$ and $k{\in}\mathbb{Z}$), we construct a formula which generates modular forms of weight 2nk+4. This formula consist of some known results in [14] and [4]. Moreover, we obtain Fourier expansion of these modular forms. We also give some properties of an operator related to the derivative formula. Finally, by using the function $j_4$, we obtain the Fourier coefficients of modular forms with weight 4.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.2
• /
• pp.120-124
• /
• 2005

Expanded rice husk (ERR) is different from commercial rice seedling media in chemical and physical properties such as pH, permeability, and water content. This study was conducted to test a possibility of improving rice seedling growth by improving the texture of ERR as a rice seedling medium. The seedling media used were a commercial seedling medium (CSM), rice husk, and ERR 1, 2, 3, and 4 with different expansion degrees. The pH of the ERHs ranged from 6.3 to 6.8. As the expansion rate increased, ERR particle sizes decreased, and water permeability and absorption rates improved. No significant differences in shoot dry weight and rate of maturity were found among the seedlings cultivated in the different ERH media. However, the mat formation of seedling roots became loose as the expansion rates were decreased. Further studies are necessary to determine the cause of poor root growth in ERH media.

• The korean journal of orthodontics
• /
• v.28 no.1 s.66
• /
• pp.85-97
• /
• 1998

The purpose of this study was to observe the effects of sodium fluoride on the bony repair and regeneration processes after the rapid palatal expansion in the growing dogs. Eighteen dogs were divided into experimental and control groups. They were in the late mixed dentition. The rapid Palatal expansion was undertaken in all the animals($180^{\circ}$ turn/day) for ten days. The animals were sacrificed on 0, 15 and 45 days after the finish of expansion. One mg NaF/kg of body weight/day were given orally to the experimental group. Blood samples were drawn before and after expansion and the se겨m calcium, phosphate and alkaline phosphatase level were measured. The undecalcified bone section of midpalatal suture area was made, and observed under the light microscopy The results were as follows ; 1. The day after expansion, the infiltration of inflammatory cells were prominent and the new bone formation started at the edges of the two palatal plates bodering the midpalatal suture in both groups. Especially, the newly formed osteoid were very extensive and the osteoblasts lining the osteoid were very active in the experimental group. 2. At fifteen days after expansion, the active osteoblasts lining the osteold at the surface of trabecular bony spicules and active new bone formation were observed in the both groups. However, the cellular activity and new bone formation were more prominent In the experimental group. 3. At forty five days after expansion, the continuous osteoid and new bone formation and active osteoblasts were observed in the experimental group. But these phenomena were not observed in the control group. In the control group, the numerous osteoclasts were adjacent midpalatal suture and the bony remodeling process was begun. The serum alkaline phosphatase level was maintained highly in the experimental group, but decreased in the control. According to the above results, the author reached the conclusion that sodium fluoride has the stimulation effects on the osteoid production of the osteoblasts during the healing process after the rapid Palatal expansion more continuously.

• Advances in materials Research
• /
• v.5 no.3
• /
• pp.131-140
• /
• 2016

Copper/silicon nitride ($Cu/Si_3N_4$) composites are fabricated by powder technology process. Copper is used as metal matrix and very fine $Si_3N_4$ particles (less than 1 micron) as reinforcement material. The investigated powder were used to prepare homogenous ($Cu/Si_3N_4$) composite mixtures with different $Si_3N_4$ weight percentage (2, 4, 6, 8 and10). The produced mixtures were cold pressed and sintered at different temperatures (850, 950, 1000, $1050^{\circ}C$). The microstructure and the chemical composition of the produced $Cu/Si_3N_4$ composites were investigated by (SEM) and XRD. It was observed that the $Si_3N_4$ particles were homogeneously distributed in the Cu matrix. The density, electrical conductivity and coefficient of thermal expansion of the produced $Cu/Si_3N_4$ composites were measured. The relative green density, sintered density, electrical conductivity as well as coefficient of thermal expansion were decreased by increasing the reinforcement phase ($Si_3N_4$) content in the copper matrix. It is also founded that the sintered density and electrical conductivity of the $Cu/Si_3N_4$ composites were increased by increase the sintering temperature.

• Corrosion Science and Technology
• /
• v.22 no.3
• /
• pp.175-186
• /
• 2023

Effects of high-temperature environment and low-temperature environment on corrosion behaviours of 18Cr stainless steels (type 304L, type 441) in simulated selective catalytic reduction (SCR) environments were studied using weight loss test in each environment and rust analysis. With time to exposure to the high-temperature environment, type 441 was more resistant to corrosion than type 304L due to both higher diffusivity of Cr and lower thermal expansion coefficient in α-iron. The former provides a stable protective Cr₂O₃ layer. The latter leaded to low residual stress between scale and steel, reducing the spallation of the scale. With time to exposure to the low-temperature environment, on the other hand, type 304L was more resistant to corrosion than type 441. The lower resistance of type 441 was caused by Cr-depleted zone with less than 11% formed during the pre-exposure to a high-temperature environment, unlike type 304L. It was confirmed by results from the crevice corrosion test of sensitised 11Cr steel. Hence, to achieve higher corrosion resistance in simulated SCR environments, ferritic stainless steels having lower thermal expansion coefficient and higher diffusivity of Cr but containing more than 18% Cr are recommended.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.5
• /
• pp.209-217
• /
• 2011

In recent days, while taller and more massive structures such as huge bridges and super skyscrapers have been welcomed, the structural stabilization in design and construction have been gradually limited due to the major weakness of current concrete which is relatively heavier when compared with its strength. To improve the weakness of the current concrete, The lightweight concrete with light weight and high strength should be used; however, not many researchers in Korea have studied on the lightweight concrete. Generally, artificial lightweight aggregate produced through high-temperature-plasticization has a possibility of its body-expansion with many bubbles. Therefore, depending on the size of aggregate, the effects of bubbles on the specific weight and strength of the lightweight concrete should be studied. In this study, considering grain-size, the mix design of the artificial lightweight aggregate produced through the high-temperature-plasticization and the body-expansion of waste and clay from the fire power plant in Korea was conducted. The experiment to analyze the variation in specific weight and strength of the lightweight concrete was followed. From these experiments, the optimized grain-size ratio of the artificial lightweight aggregate for the enhancement of high-strength from the lightweight concrete was revealed.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1716-1721
• /
• 2011

The Public Address and Passenger Information System of Rolling Stock should be able to perform automatic announcements in connection with TCMS(Train Control and Monitoring System), common announcements and emergency announcements for safe operation and the passengers. CCTV(Closed Circuit Television) System also should be able to watch passenger compartment for safety. Those equipments are very important thing for train service and safety. but the installation of equipment is restricted by space, weight, modulation. therefore, Passenger Information Intergrated System(PIIS) is required to consider economical efficiency, technical trend, expansion and space insufficiency. and system based on IP network has to be considered as new PIIS. so PIIS could meet economical efficiency and expansion. and it could go further and share network with TCMS and others.

• Computers and Concrete
• /
• v.21 no.5
• /
• pp.531-538
• /
• 2018

The slag through sieve #4 replaced the natural fine aggregate in different proportions (0-50%) to make ready-mixed soil and slag (RMSAS). The fresh properties studied, and the concrete specimens were produced to test the hardened properties at different ages. Results showed that the workability of RMSAS decreases when the replacement increases. The unit weight increases with the replacement. The setting time extends when the replacement decreases and shortens when the replacement increases. The compressive strength, ultrasonic pulse velocity and hammer rebound value increase with the replacement. However, the high-replacement results decrease because of the expansion factor at late age. Resistivity is close and less than $20k{\Omega}-cm$. After the industrial of steelmaking by-products are processed properly, they can be used in civil engineering, not only as a substitute for natural resources and to reduce costs, but also to provide environmental protection.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.4
• /
• pp.309-315
• /
• 2014

Summer cabbages in an alpine area are very sensitive to the fluctuations in supply and demand. Yield variability due to weather conditions dictates the market fluctuations of cabbage price. This study reports an empirical relationship based on weather conditions to estimate the growth and harvestable biomass of cabbages, factors that are critical for supply of summer cabbages. Based on experimental results testing sowing date effects over the two years from 1997 to 1998, a logistic equation was parameterized to predict leaf area expansion of summer cabbages. This logistic model for leaf area expansion was then combined with an empirical allometric relationship to predict total biomass. The final equation for estimating fresh weight accumulation of Chinese cabbage is given by: $$Fresh\;weight=3500/(1+{\exp}(5.175-1.153{\times}(6/(1+{\exp}(6.367-0.0064{\times}PHU)))))$$ Where PHU is potential heat units ($^{\circ}C$). The model performance was tested using weather data from 2003 to 2006 to predict fresh harvestable biomass. Overall the model performance was satisfactory with the correlation efficient ranging between 0.89 and 0.94 for each year.