• Korean Journal of Construction Engineering and Management
• /
• v.17 no.4
• /
• pp.12-19
• /
• 2016

Recently, The importance of modular construction method has increased by market environmental change. However, it's application in the actual project is restricted due to the lack of understanding of modularization and the absence of utilization system. To overcome this problem, this study propose the decision-making model for selecting modular or conventional (stick-built) construction method at early stage. First the needs of modular method in plant project is derived and the benefits and barriers of modular construction are analyzed through literature review. Based on this analysis, 6 decision-making factors covered project and modular characteristics are derived and the decision-making model is developed. Finally, 12 actual overseas project cases is evaluated by this model for verifying its applicability. This proposed model can provide the guideline to select the construction method in early stage for successful execution of plant project.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.1
• /
• pp.65-73
• /
• 2018

Since unfair trading practices between participants in construction project are common, the government has enforced several policies and systems to prevent or minimize the unfair trading practices in construction industry. However, not much attention has been paid to figure out which policies or acts are working or not. This paper analyzed the effectiveness of the policies and acts which are being implemented to prevent unfair trading practices and provided several suggestions to improve the performance of those acts. Survey was conducted to industry experts to collect data regarding their perceptions on those policies and acts. Then the effectiveness of the policies and acts were analyzed in terms of their importance and performance through IPA (Importance-Performance Analysis) based on the survey result. It was found through IPA that execution related acts such as investigation, exposure, and punishment for unfair trading practice have shown low effectiveness in entire construction process and dispute arbitration and mediation related center operated by authority showed low performance too. To improve the effectiveness of those acts, dispute arbitration system improvement, investigation & reporting system consolidation and enhancement practical binding force of punishment and penalty were suggested. Most of all, rules and culture for fair trading should become more established in construction industry by preventing conflict among participants through active communication.

• Management & Information Systems Review
• /
• v.35 no.2
• /
• pp.185-203
• /
• 2016

This study set up a study model through a previous study and aims to determine the control effect by organizational support in the effect relationship between consulting performance which is an independent variable and organizational performance which is a dependent variable. To do that, the hypothesis was verified by using statistical programs such as SPSS 20.0 and AMOS 20.0 which can be statistically useful with 511 copies except for the copies which cannot be utilized, over 4 weeks from February $25^{th}$ to March $24^{th}$, 2015, focusing companies located in Seoul, Gyeonggi, Incheon. The hypothesis testing result of the study model set by this study shows that firstly, this study has contributed to establishing an additional theory in the research between consulting performance and organizational performance while it has not been enough for consulting performance and organizational performance in previous studies. Second, although the moderating variable of organizational support in the effect relationship between consulting performance and organizational performance didn't show a partial positive (+) role in the hypothesis testing, more detailed analysis in the survey process and the variety on questionnaire configuration were provided in the variable selection. Third, as consulting performance shows a positive effect on organizational performance, a higher consulting performance gives a direct impact on organizational performance so that a realistic action plan on internalizing and enhancing consulting execution result into organizational performance is aggressively required.

• Journal of Digital Convergence
• /
• v.15 no.7
• /
• pp.13-25
• /
• 2017

The Korean government is pursuing technological development through nearly every government agency, and Korea's growing R&D spending is yielding good results in many fields. With the country moving from the technology development stage to the demonstration stage, it is actively implementing testbed projects to demonstrate developed technologies and services. This is, however, not without problems. There is no consistent systematic system for the testbed projects because government agencies compete against each other in the planning of execution of R&D: they do not work together. The most serious problem is that both testbeds and developed technologies die out due to poor operation management after the completion of test projects. Research should, therefore, be done on operation management and commercialization. However, the government still does not consider the system after the test: it focuses on building testbeds to verify developed technologies. This study intends to determine the basic orientation of operation management to ensure maximum performance, efficiency, and continuity of national projects through intensive analysis of ongoing national R&D testbed projects and examination of success stories of operation management at home and abroad.

• Korean Journal of Social Welfare
• /
• v.61 no.1
• /
• pp.293-322
• /
• 2009

This study investigated the problems of remarried wife with alcoholic problem. Specifically, this study regarded the wife's alcoholic problem as the problems of dysfunctional interaction among family members rather than an individual problem. The study had three purposes as follows. First, what were the interactions sustaining the conflict of remarried family? Second, what were the characteristics of remarried family relating to family conflict? Third, what were the interventions of family therapy to resolve the conflicts of remarried family? The total family counseling was 9 sessions, which included individual, couple, and family counseling. The study used constant comparative analysis by using open coding method to find the factors relating interactions sustaining the conflict of remarried family, the characteristics of remarried family relating to family conflict, and the interventions of family therapy to resolve the conflicts of remarried family. Also, the study used Miles and Huberman's matrix and graphical network display to show the interaction of family members. The study found intriguing factors, counteracting factors, relationship level, and relational elements to wife's alcoholic problems among family members. The study revealed husband's rigid family rules, husband's execution of patriarchal authority, husband's pursuit of family identity, and husband's emphasis of union among family members as the characteristics of remarried family. On the other hand, the study found the reinforcement of spousal subsystem, the pursuit of change in communication pattern between husband and wife, the amelioration of rigid family rules, and the acceptance of differences among family members as the intervention of family therapy to resolve the conflicts of remarried family.

• Journal of the Korean Institute of Gas
• /
• v.20 no.6
• /
• pp.16-22
• /
• 2016

Coating pipe(PLP) has been generally used in buried site for protecting the corrosion. To prevent the damage by occurring the defect, other construction or execution works, an anti-oxidation environment was forcibly made by using protective potential. Coating and protective potential are applied simultaneously, but corrosion rate or defects are not easy to observe because soil composition has many uncertainty. Also, defect of coating pipe can not be directly observed. A corrosion coupon can easily measure a corrosion rate directly. The corrosion rate was measured with 6 scenarios using corrosion coupon during about 1 year(6 scenarios are based on soil type and protective potential or not in this research. Resultingly, the corrosion coupon has not occurred in the case of protected by potential current, but corrosion has occurred in a non-protected site. The corrosion rate was measured at least in the clay, and the propensity of corrosion rate was similar in other soil(sand and loams). The local corrosion has occurred in the clay because of high water content. On the other hand, general corrosion was occurred in sand and loams. Commonly, sand is not to corrosive soil. Although, corrosion occurred in sand can be estimated by chemical component and valid with chemical analysis report.

• Journal of Science Education
• /
• v.44 no.2
• /
• pp.240-258
• /
• 2020

The advances in science technology brought about a new form of learning called flipped-learning: a combination of on-line and off-line learning. A flipped learning is a form of blended learning which has become quite popular, nowadays, in the field of education. Despite the emphasis on the importance of medical humanities in medical education program, there are no effective teaching and learning models to realize the purpose of medical humanities education. This study explores the possibility of flipped-learning to apply medical humanities classes. The class was designed based on the ADDIE model consisting of five stages, analysis - design - development - execution - evaluation. In order to do 'flipped-learning,' the instructor reconstructs the purpose of medical humanities education, instructional purpose and content, and analyzed learner. The contents of the medical humanities class were structured considering the purpose of the introduction to the medical humanities in the medical education program and the competencies that medical personnel should have in the developed health care environment. The instructor produces a video of the lecture and makes it possible to use LMS (Learning Management System) before and after classes, and conducts discussion activities so that learner-learner and learner-teacher interaction could actively occur during the class. The result of applying medical humanities lesson as flipped learning is as follows: First, it can realize the essence of medical humanities education. Second, it contributes to strengthening the competencies of health care provider. Third, flip learning can be used as a new teaching strategy for medical humanities education. The result of this study is expected to suggest new ways of introduction to teaching method in the traditional medical humanities class and contribute to the practice of designing and doing flipped learning of medical humanities class in the future.

• The Journal of Engineering Geology
• /
• v.18 no.4
• /
• pp.523-535
• /
• 2008

A simulated rainfall system was built, and the unsaturated characteristics were examined by execution of simulated rainfall system test and soil water characteristic curve cell test(SWCC Cell Test) under the various rainfall and slope conditions. With the results, the applicability of infiltration behavior under rainfall and soil water characteristic curve models to the unsaturated weathered granite soil was examined. At the results of comparison the volumetric water content and matric suction measured in the wetting process(under rainfall) with those in the drying process(leaving as it was) of the simulated rainfall system, the volumetric water content showed a difference of $2{\sim}5%$ and matric suction of about $3{\sim}10\;kPa$, indicating the occurrence of hysteresis. In addition, the difference was relatively larger in matric suction than in the volumetric water content, and this tells that the hysteresis behavior is larger in matric suction. When the soil water characteristic curve derived from measurements in simulated rainfall system test were compared with those from the soil water characteristic curve cell test, both methods produced soil water characteristic curves close each other in the wetting process and the drying process, but in both, there was a difference between results obtained from in the wetting process and those from in the drying process. Thus, when soil water characteristic curves are rationally applied to the design and stability analysis considering of the properties of unsaturated soil, it is considered desirable to apply the soil water characteristic curve of the wetting process to the wetting process, and that of the drying process to the drying process.

• Journal of Embryo Transfer
• /
• v.30 no.3
• /
• pp.239-248
• /
• 2015

The nature of molecular mechanisms governing embryonic cell block is largely unknown, but recent reports have demonstrated that proper execution of programmed cell death is crucial for this process. The main objective of this study is to determine effects of programmed cell death on porcine oocytes development in vitro after parthenogenesis. Among the blastocysts matured in 3MA, MAP1LC3A and ATG5 RNA gene expression level increased in the order of Cyst < 3MA < RP. However, Casp-3 and TNF-r RNA gene expression level decreased in the order of RP < 3MA < Cyst. Expression of mTOR within the RP-cultured blastocyst was the most highly to the inner cell mass, while 3MA-cultured blastocyst showed very lowest expression in inner cell mass. The expression of mTOR showed a pattern opposite to that of MAP1LC3A. That is, its expression was the lowest in Cyst group. When the enzymatic activity of MMP-2 and MMP-9 was assessed in culture, the level of active MMP-9 was higher expression in the medium of each RP treatment group, with the level of another treatment group being relatively higher. Analyses of TIMP-2 and TIMP-3 revealed that their expression was higher in groups that did not receive RP treatment. More specifically, the level of TIMP-2 was not affected by Cyst treatment, while the level of TIMP-3 was higher in 3MA and RP treatment group. There was highly cell division activation efficiency of parthenogenesis on cultured system of RP supplement IVC medium. Therefore, these results suggest that embryo development was significantly increased in conditional culture medium with active autophagy as compared to common cultured condition. Further investigation of this distinction may enable the development of innovative improvements for the production of porcine somatic cell nuclear transfer.

• Journal of Korea Technology Innovation Society
• /
• v.15 no.1
• /
• pp.185-202
• /
• 2012

This study analyzed the achievement characteristics of 21st Century Frontier R&D Program depending on the subject of study, type, period in order to provide necessary data required during planning and execution of the large scale R&D projects. 21st Century Frontier R&D Program is a representative national R&D project that has been supported for a decade. The research achievements were analyzed for researchers who participated in each four projects completed in 2010 and 2011 among 16 R&D projects of 21st Century Frontier R&D Program promoted by Ministry of Education, Science and Technology. The research is summarized as follows. First, the achievements varied depending on the main agent such as universities, R&D institutions, and industries. The achievement of universities includes significantly larger publications than those of R&D institutions and industries. Second, the rate of overseas patent application and registration were higher in industries significantly than those in other research agents. Third, the achievements differed depending on research type such as basic, applied, and development researches, and the development researches exhibited significantly higher achievements in domestic patent application and registration, overseas patent application, and technology transfer. Fourth, in terms of the research period, long-term projects show significantly larger number of domestic patent applications than those from short-term projects. Fifth, when achievements like the publication and overseas patent application were classified in such fields as bio, nano, and energy environment R&D, bio and nano fields showed higher achievement than the energy environment field. This research could empirically confirm that the achievement characteristics of large scale and long-term government support R&D projects vary for each research properties.