• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.3
• /
• pp.406-414
• /
• 1996

This study was undertaken to evaluate estimated and analyzed contents of sodium and potassium in the salt-restricted diet using "Food exchange sheet fro control of protein, sodium and potassium" for renal disease patients. Average food intake per day in the salt-restricted diet was 2, 241.2$\pm$68.4g, and water content of meals per day was 2, 082.7$\pm$144.3g including 297.7$\pm$91.1g of metabolic water from protein, fat and carbohydrate. Fried food showed higher weight change than that of the other kinds of food during cooking. Estimated and analyzed content of sodium were 656.4$\pm$273.2mg, 675.7$\pm$195.3mg, respectively ; those of potassium were 2, 198.3$\pm$37.3mg, 2, 142.3$\pm$162.4mg, respectively. Fried squid showed the lowest content of analyzed sodium and potassium compared with the estimated contents. The highest content of sodium was honeyed juice with apple, whereas the highest content of potassium was Mulkimchi. There was also no significant differences between analyzed and estimated content of sodium, as in case of potassium(p<0.05). Side dish and main dish made great contribution to sodium contents and the side dish and dessert were major source for potassium.potassium.

• Journal of Environmental Science International
• /
• v.24 no.7
• /
• pp.939-946
• /
• 2015

Hydraulic conductivity is an important parameter in the analytical model of groundwater. This study analyzed the groundwater movement characteristics by estimating optimal parameters according to hydraulic conductivity input methods with the MODFLOW model which is widely used. It first estimated the optimal parameters by dividing hydraulic conductivity zones by attitude. Next, it estimated optimal parameters by geological characteristic. It analyzed the groundwater movement characteristics by applying the recharge quantity and amount of evapotranspiration of drought periods and flood years with the estimated parameters. As the result was analyzed that there are differences of observation water level values according to hydraulic conductivity input methods but there is no big differences of overall groundwater movement characteristics by hydraulic conductivity input method, the two methods have found to be applicability in analyses of groundwater. So, it is judged that studies on more exact application of hydraulic conductivity and the application methods are needed.

• Korean Journal of Agricultural Science
• /
• v.49 no.4
• /
• pp.949-961
• /
• 2022

The purpose of this study is to build an oyster outlook model. In particular, by limiting oyster items, it was designed as a partial equilibrium model based on a panel analysis of a fixed effect model on aquaculture facilities. The model was built with a dynamic ecological equation (DEEM) system that considers aquaculture and harvesting processes. As a result of the estimation of the initial aquaculture facilities based on the panel analysis, the elasticity of the remaining facility volume in the previous month was estimated to be 0.63. According to Nerlove's model, the adjustment coefficient was interpreted as 0.31 and the adjustment speed was analyzed to be very slow. Also, the relative income coefficient was estimated to be 2.41. In terms of elasticity, it was estimated as 0.08% in Gyeongnam, 0.32% in Jeonnam, and 1.98% in other regions. It was analyzed that the elasticity of relative income was accordingly higher in non-main production area. In case of the estimation of the monthly harvest facility volume, the elasticity of the remaining facility volume in the previous month was estimated as 0.53, and the elasticity of the farm-gate price was estimated as 0.23. Both fresh and chilled and frozen oysters' exports were estimated to be sensitive to fluctuations in domestic prices and exchange rates, while Japanese wholesale prices were estimated to be relatively low in sensitivity, especially to the exchange rate with Japan. In estimating the farm-gate price, the price elasticity coefficient of monthly production was estimated to be inelastic at 0.25.

• Journal of Astronomy and Space Sciences
• /
• v.33 no.4
• /
• pp.323-333
• /
• 2016

In this study, the uncertainty requirements for orbit, attitude, and burn performance were estimated and analyzed for the execution of the $1^{st}$ lunar orbit insertion (LOI) maneuver of the Korea Pathfinder Lunar Orbiter (KPLO) mission. During the early design phase of the system, associate analysis is an essential design factor as the $1^{st}$ LOI maneuver is the largest burn that utilizes the onboard propulsion system; the success of the lunar capture is directly affected by the performance achieved. For the analysis, the spacecraft is assumed to have already approached the periselene with a hyperbolic arrival trajectory around the moon. In addition, diverse arrival conditions and mission constraints were considered, such as varying periselene approach velocity, altitude, and orbital period of the capture orbit after execution of the $1^{st}$ LOI maneuver. The current analysis assumed an impulsive LOI maneuver, and two-body equations of motion were adapted to simplify the problem for a preliminary analysis. Monte Carlo simulations were performed for the statistical analysis to analyze diverse uncertainties that might arise at the moment when the maneuver is executed. As a result, three major requirements were analyzed and estimated for the early design phase. First, the minimum requirements were estimated for the burn performance to be captured around the moon. Second, the requirements for orbit, attitude, and maneuver burn performances were simultaneously estimated and analyzed to maintain the $1^{st}$ elliptical orbit achieved around the moon within the specified orbital period. Finally, the dispersion requirements on the B-plane aiming at target points to meet the target insertion goal were analyzed and can be utilized as reference target guidelines for a mid-course correction (MCC) maneuver during the transfer. More detailed system requirements for the KPLO mission, particularly for the spacecraft bus itself and for the flight dynamics subsystem at the ground control center, are expected to be prepared and established based on the current results, including a contingency trajectory design plan.

• Journal of Korean Society of Rural Planning
• /
• v.23 no.4
• /
• pp.153-168
• /
• 2017

The main objective of this study was to assess reference evapotranspiration based on multiple GCMs (General Circulation Models) and estimation methods. In this study, 10 GCMs based on the RCP (Representative Concentration Pathway) 4.5 scenario were used to estimate reference evapotranspiration. 54 ASOS (Automated Synoptic Observing System) data were constructed by statistical downscaling techniques. The meteorological variables of precipitation, maximum temperature and minimum temperature, relative humidity, wind speed, and solar radiation were produced using GCMs. For the past and future periods, we estimated reference evapotranspiration by GCMs and analyzed the statistical characteristics and analyzed its uncertainty. Five methods (BC: Blaney-Criddle, HS: Hargreaves-Samani, MK: Makkink, MS: Matt-Shuttleworth, and PM: Penman-Monteith) were selected to analyze the uncertainty by reference evapotranspiration estimation methods. We compared the uncertainty of reference evapotranspiration method by the variable expansion and analyzed which variables greatly influence reference evapotranspiration estimation. The posterior probabilities of five methods were estimated as BC: 0.1792, HS: 0.1775, MK: 0.2361, MS: 0.2054, and PM: 0.2018. The posterior probability indicated how well reference evapotranspiration estimated with 10 GCMs for five methods reflected the estimated reference evapotranspiration using the observed data. Through this study, we analyzed the overall characteristics of reference evapotranspiration according to GCMs and reference evapotranspiration estimation methods The results of this study might be used as a basic data for preparing the standard method of reference evapotranspiration to derive the water management method under climate change.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.4
• /
• pp.535-541
• /
• 2010

Excessive intake of sodium is known as a risk factor for hypertension, and Korean adults consume sodium 3 times higher than Dietary Reference Intakes (DRIs). The purpose of this study was to evaluate the difference on sodium content between analyzed and estimated by food composition table and food exchange list. Seven days of low salt diet and seven days of high salt diet were prepared, and sodium contents were estimated by food composition table and food exchange list and measured by atomic absorption spectrophotometer. Sodium contents of diet per day estimated by food exchange list significantly differed from analyzed content, but those estimated by food composition table were not. However, when absolute differences from analyzed content were compared by dishes in the low and high salt diet periods, there were significant differences among estimated sodium content by food composition table and food exchange list and analyzed sodium content. The discrepancy between those results was due to that absolute value was used to compare sodium contents of dishes but not to compare sodium contents of days. In addition, main dish, side dish, and soup were significantly different among estimated sodium content by food composition table and food exchange list and analyzed sodium content. Actual sodium contents of Jap-Chae Deop-Bap and Roasted chicken with oyster sauce differed to a great extent from estimated contents by food exchange list and food composition table. In conclusion, actual sodium contents of Korean dishes were significantly different from those estimated by food composition table and food exchange list, and thus these differences in salt content should be considered on planning of low-salt menu for hypertensive patients.

• Journal of Applied Reliability
• /
• v.16 no.4
• /
• pp.356-363
• /
• 2016

Purpose: The purpose of this study is to propose efficiency of equipment testing the luminance degradation of OLED. Methods: The degradation model of Exponential model and Stretched exponential model is analyzed by goodness of fit test using calculated R-square. The degradation model having the higher R-square is finally selected. Scale parameter and Shape parameter using the selected degradation model is estimated. The activation energy and current density n using peck model among the accelerated model is estimated. the estimated parameters are analyzed by t-test. Results: The results of t-test show that the estimated parameters on chamber and hotplate are equal statistically. we can know the similarity of the luminance degradation rate and degradation pattern on chamber and hotplate. Conclusion: The result of the degradation test on chamber and hotplate is similar. when the accelerated degradation test on the panel of the OLED TV is performed, hotplate is requiring less samples, time and cost than chamber. so the accelerated degradation test on the panel of the OLED TV using the hoplate is efficient of time and cost.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1989.10a
• /
• pp.53-58
• /
• 1989

Thicknesses of the base concrete blocks for large machines were estimated by analyzing the resonance modes of mechanical vibrations. The vibration was produced by the mechanical impact and detected by a wideband conical transcuder. There signals were analyzed by FET and thicknesses were obtained by the peaks of frequency spectrum. The estimated thickness upto 100cm are in good agreement with the real ones. For the layered concrete block, the estimated thickness is dependent on the acoustic reflective index at the boundary of the two layers.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.191-197
• /
• 2009

As a case study on determining the replacement interval for the CMB contactor, we analyzed a field failure data during 59 months and through the simulation reliability is analyzed. As a result of analyzing the reliability we estimated parameters and analyzed distribution characteristics. Ultimately using the estimated results and applying the Age Replacement Policy considered the cost information, CMB contactor's replacement interval is determined. Through the comparison, analysis between the replacement interval and manufacturing company's, the necessity of replacement interval that is reflected in our operation circumstances is examined.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.2
• /
• pp.1-11
• /
• 2018

Probable Maximum Flood (PMF) is mostly applied for the designs of large-scale hydraulic structures and it is estimated by computing the runoff hydrograph where Probable Maximum Precipitation (PMP) is inserted as design rainfall. The existing PMP is estimated by transferring the heavy rainfall from all watersheds of korea to the design watershed, however, in this study, PMP was analyzed by selecting only rainfall events occurred in the design watershed. And then, Catchment-scale Soil Erosion Model (CSEM) was used to estimate the PMF and sediment-runoff yield according to the watershed-based estimated PMP. Although the PMF estimated in this study was lower than the existing estimated PMF in the Yongdam-dam basin, it was estimated to be higher than the 200-year frequency design flood discharge. In addition, sediment-runoff yield was estimated with a 0.05 cm of the maximum erosion and a 0.06 cm of the maximum deposition, and a total sediment-runoff yield of 168,391 tons according to 24-hour PMP duration.