• Title/Summary/Keyword: esthetic analysis

Search Result 310, Processing Time 0.025 seconds

Convergence Study on Durability Analysis of Scooter Seat (스쿠터 시트의 내구성 해석에 관한 융합 연구)

  • Oh, Bum-Suk;Cho, Jae-Ung
    • Journal of the Korea Convergence Society
    • /
    • v.10 no.6
    • /
    • pp.165-170
    • /
    • 2019
  • This study carried out the structural analysis and vibration analysis on scooter seat. By comparing with three kinds of B-bone A, Julio B, and City Ace C, the load was applied to scooter seat as much as a weight of person. Through structural analysis, this study examined which seat is most deformed by comparing the deformation each other or affords passengers most convenience and does not afford passengers the inconvenience by absorbing the vibration during driving. Model C has the most total deformation at the structural analysis result and Model B is seen to be changed to be convenient to sit the deformation as it deforms largely. Through this study, which seat is most convenient and becomes strong on durability can be confirmed. As the durability analysis result data of scooter seat model obtained on the basis of this study result are utilized, the esthetic sense can be shown by being grafted onto the machine or structure at real life.

Comparison of the observer reliability of cranial anatomic landmarks based on cephalometric radiograph and three-dimensional computed tomography scans (삼차원 전산화단층촬영사진과 측모두부 방사선규격사진의 계측자에 따른 계측오차에 대한 비교분석)

  • Kim, Jae-Young;Lee, Dong-Keun;Lee, Sang-Han
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • v.36 no.4
    • /
    • pp.262-269
    • /
    • 2010
  • Introduction: Accurate diagnosis and treatment planning are very important for orthognathic surgery. A small error in diagnosis can cause postoperative functional and esthetic problems. Pre-existing 2-dimensional (D) chephalogram analysis has a high likelihood of error due to its intrinsic and extrinsic problems. A cephalogram can also be inaccurate due to the limited anatomic points, superimposition of the image, and the considerable time and effort required. Recently, an improvement in technology and popularization of computed tomography (CT) provides patients with 3-D computer based cephalometric analysis, which complements traditional analysis in many ways. However, the results are affected by the experience and the subject of the investigator. Materials and Methods: The effects of the sources human error in 2-D cephalogram analysis and 3-D computerized tomography cephalometric analysis were compared using Simplant CMF program. From 2008 Jan to 2009 June, patients who had undergone CT, cephalo AP, lat were investigated. Results: 1. In the 3 D and 2 D images, 10 out of 93 variables (10.4%) and 11 out 44 variables (25%), respectively, showed a significant difference. 2. Landmarks that showed a significant difference in the 2 D image were the points frequently superimposed anatomically. 3. Go Po Orb landmarks, which showed a significant difference in the 3 D images, were found to be the artificial points for analysis in the 2 D image, and in the current definition, these points cannot be used for reproducibility in the 3 D image. Conclusion: Generally, 3-D CT images provide more precise identification of the traditional cephalometric landmark. Greater variability of certain landmarks in the mediolateral direction is probably related to the inadequate definition of the landmarks in the third dimension.

Analysis on the Survey of Skin Types According to Vata, Pitta, Kapha Constitution in Ayurveda (아유르베다의 바타(Vata), 피타(Pitta), 카파(Kapha) 체질에 따른 피부 유형 조사 분석)

  • Kim, Young-Mi;Choi, Eun-Young;Chang, Byung-Soo
    • Journal of Society of Preventive Korean Medicine
    • /
    • v.13 no.2
    • /
    • pp.19-26
    • /
    • 2009
  • Objectives : This study was investigated to the relationship ayurvedic constitution and each skin hydration and pH. Methods : The questionaire survey and skin analysis of female students attending university located in Chugnam was carried out in order to assess skin types according to ayurvedic constituion such as vata, pitta and kapha. Data analysis were used describe statistics, ANOVA in Duncan's multiple comparative test and Pearson's correlation by SPSS. Skin hydration and pH was measured by Corneometer and skin-pH meter. Results : The results of this study are as follows. First, in terms of knowledge of ayurvedic constitutional types most students are not aware of that. Second, the most common constitution in the ayurveda medical system was pitta. Third, in the analysis of skin type by constitution of ayurveda, vata had dry skin while pitta and kapha tended to have more combination skin. However, this result didn't show any statistically significant difference either. Forth, the analysis of skin tone by constitution of ayurveda showed that vata was white, and pitta and kapha were just average. Discussion and Conclusion : The results of this study was shown that the difference between Korean and Indian, so we should develop effective diagnosis tool for Korean people. In the future, we expect that ayurvedic skin and body program developed by this study spread and practical use at esthetic industry and domain of esthetics in Korea.

  • PDF

Study on Convergence Technique through Strength Analysis of Stabilizer Link by Type (스테빌라이저 링크의 종류별 강도 해석을 통한 융합 기술연구)

  • Cho, Jae-Ung
    • Journal of the Korea Convergence Society
    • /
    • v.6 no.1
    • /
    • pp.57-63
    • /
    • 2015
  • In this study, the lower arm is connected and fixed at the model of the automotive stabilizer link as the moment is applied. There are models of 1, 2 and 3 as a length control type, a general type and a single body type respectively. These models are investigated by performing the convergence technique through the design and the strength analysis with CATIA and ANSYS. As the maximum equivalent stress of model 3 has the least, model 3 can endure the highest load among three models. As the fatigue analysis, model 3 has the minimum blocks as the frequency of stress state, model 3 becomes also safest among three models. As models of 1, 2 are in the order of the next safety, the number of blocks becomes larger as the frequency of stress state and the instability becomes higher. And it is possible to be grafted onto the convergence technique at design and show the esthetic sense.

APPLICATION OF FINITE ELEMENT ANALYSIS TO EVALUATE PLATFORM SWITCHING

  • Kim Yang-Soo;Kim Chang-Whe;Jang Kyung-Soo;Lim Young-Jun
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.43 no.6
    • /
    • pp.727-735
    • /
    • 2005
  • Statement of problem. Platform switching in implant prosthesis has been used for esthetic and biological purpose. But there are few reports for this concept. Purpose. The purpose of this study is evaluation of platform switching in wide implant by three dimensional finite element analysis. Materials and Methods. The single implant and prosthesis was modeled in accordance with the geometric designs for Osstem implant system. Three-dimensional finite element models were developed for (1) a wide diameter 3i type titanium implant 5 mm in diameter, 13 mm in length with wide cemented abutment, titanium alloy abutment screw, and prosthesis (2) a wide diameter 3i type titanium implant 5 mm in diameter, 13 mm in length with regular cemented abutment, titanium alloy abutment screw and prosthesis(platform switching) was made for finite element analysis. The abutment screws were subjected to a tightening torque of 30 Ncm. The amount of preload was hypothesized to 650N, and round and flat type prostheses were loaded to 200 N. Four loading offset point (0, 2, 4, 6 mm from the center of the implants) were evaluated. Models were processed by the software programs HyperMesh and ANSA. The PAM-CRASH 2G simulation software was used for analysis of stress. The PAM-VIEW and HyperView were used for post processing. Results. The results from experiment were as follows; 1. von Mises stress value is increased in order of bone, abutment, implant and abutment screw. 2. von Mises stress of abutment screw is lower when platform switching. 3. von Mises stress of implant is lower when platform switching until loading offset 4 mm. 4. von Mises stress of abutment is similar between each other. 5. von Mises stress of bone is slightly higher when platform switching. Conclusion. The von Mises stress pattern of implant components is favor when platform switch ing but slightly higher in bone stress distribution than use of wide abutment. The research about stress distribution is essential for investigation of the cortical bone loss.

Examining the Influence of Leisure Involvement and Experience Quality on Behavioral Intentions (여가 관여도, 체험의 질이 행동의도에 미치는 영향에 관한 연구)

  • Park, Keun-Soo;Zhao, Li;Kim, Sunyoung
    • The Journal of the Korea Contents Association
    • /
    • v.18 no.10
    • /
    • pp.644-656
    • /
    • 2018
  • This study focused on relationships among leisure involvement, experience quality and behavioral intention in the urban parks. A total of 335 were collected, and during the data refinement process, 39 questionnaires were eliminated from the study due to partial and inconsistent responses. thus leading to 296 usable questionnaires out of 335. In the final result, 296 questionnaires were coded for the analysis purpose. The hypothesized conceptual model was used to analyze the Descriptive Analysis and Frequency Analysis, Exploratory Factor Analysis, and Multiple Regression Analysis using SPSS 24.0. The result indicated this: residents' experience quality in urban parks depends on more attraction and centrality of leisure involvement than on the self-experience quality of leisure involvement. The results of this study also indicate that not all experience dimensions are important for resulting in positive behavioral intentions to urban parks. The quality of education, esthetic, and escape experience showed a significant predictor of behavioral intentions, while the quality of entertainment experience did not show a significant positive relationship with behavioral intentions.

Formative Characteristics of Necklace in Fashion Collection (패션컬렉션에 나타난 네크리스의 조형적 특성)

  • Bae, Jung-Who;Lee, Kyung-Hee
    • Fashion & Textile Research Journal
    • /
    • v.13 no.4
    • /
    • pp.461-471
    • /
    • 2011
  • Jewelry has recognized as a part of independent formative arts of fashion with the change modern man's cognition for the fashion. It is a great important section to express fashion image. So, many corporations design and develop the jewelry by themselves to maxmize their fashion image. Among the so many kinds of jewelry, especially the necklace is located beneath the face and linked as a part of fashion, so it frequently has showed in Fashion Collection. Like this Fashion and jewelry enact each other and share their esthetic features but, it is insufficient the study of fashion linked with the jewelry. In this study, we defined the words which is using confusedly according to jewelry forms what researched by others. In addition, we tend to study the effect of that the form, hue and character of materials of necklace that is expressed in fashion collection influence fashion image. The method of this study is comprised with precedent studies and analysis of necklace photos in fashion collection. For the analysis of data, we implement content analysis and statistical analysis using SPAW Statistics 18(frequency analysis, percentage, cross-tabulations, $X^2$-test). Because the hue and the form of necklace take a great role to make fashion image with the sense of its eyesight, its effective coordination go up the delicate feelings with the form, hue and quality of the fashion. Especially, the hue is the essential element of formative characteristics to express visual image. The necklace had coordinated more frequently in S/S than F/W, it means that more light and simple fashion let ornamental beauty could express by the necklace. So, it is very effective things that we predict the trend of fashion, then, coordinate with well-matched necklace.

A Convergence Study through Durability Analysis due to the Number of Automotive Seat Frame Supports (자동차 시트 프레임 지지대 개수에 따른 내구성 해석을 통한 융합연구)

  • Choi, Gye-Gwang;Cho, Jae-Ung
    • Journal of the Korea Convergence Society
    • /
    • v.9 no.8
    • /
    • pp.155-160
    • /
    • 2018
  • Automotive seat is a part to supply the convenience and safety of driver at driving. Recently, the seat has the role to protect driver from the outside impact or vibration and give the convenience except such a usage as chair. The design on structural function of the seat frame is important like the impact safety and durability. In this study, the seat is designed by adding one hollow rod to the part of seat back frame in order to enhance the structural safety and durability. This study was carried out by using CATIA and ANSYS as the design and analysis programs. As this study result through the structural and vibrational analyses, model 4 was seen to have the durability more superior than the other models. By utilizing this result, it is thought to be the useful material at designing the automotive seat frame with durability. It is possible to be grafted onto the convergence technique at the automotive seat frame and show the esthetic sense.

Study on the Development of Tools for Measurement of Consumers' Brand Experience Inside and Outside a Fashion Brand Store at a Large Shopping Center (소비자의 대형 쇼핑센터 내 패션브랜드 매장 내·외부에서의 브랜드 체험 측정도구 개발에 관한 연구)

  • Lee, Jin Hwa;Kim, Jeong Hee
    • Fashion & Textile Research Journal
    • /
    • v.17 no.4
    • /
    • pp.574-587
    • /
    • 2015
  • This quantitative study helps develop a measurement tool for consumer experiences inside and outside of a fashion brand store in a large shopping center along with a previous qualitative study that utilized a consumer interview. An expert group interview was conducted to verify the result of the previous qualitative study. Subjects were selected through convenient sampling. A self-administered questionnaire was developed to collect the data. We used 666 questionnaires for data analysis. To analyze data, reliability analysis, factor analysis, correlation analysis and measurement equivalence verification were conducted with a statistical package of SPSS 21.0 and Amos 18.0. We used 27 questions in 8 factors for consumer experience inside of the fashion brand store: fashion product, VMD, salesperson responsiveness, salesperson specialty, salesperson's special treatment, salesperson's respect for customers, and positive/negative emotion. We used 27 questions concerning seven factors for the consumer experience outside of a fashion brand store that encompasses a large shopping center: experience with brand and product category diversity, experience with promotion and event, esthetic experience, experience with culture and entertainment, experience with recreational behavior, experience with reputation and sense of pride, and experience with customers.

A three-dimensional photogrammetric analysis of the facial esthetics of the Miss Korea pageant contestants

  • Jang, Kab Soo;Bayome, Mohamed;Park, Jae Hyun;Park, Ki-Ho;Moon, Hong-Beom;Kook, Yoon-Ah
    • The korean journal of orthodontics
    • /
    • v.47 no.2
    • /
    • pp.87-99
    • /
    • 2017
  • Objective: The aims of this study were to measure and compare the facial dimensions of the Miss Korea pageant contestants and a selected group of women from the general population by using three-dimensional (3D) image analysis, as well as to compare various facial ratios to the golden ratio within each group. Methods: Three-dimensional images of 52 Miss Korea pageant contestants (MK group) and 41 young female adults selected from the general population (GP group) were acquired. Fifty-four variables and ratios were measured and calculated. Intergroup comparisons were performed using multivariate analysis of variance. Results: Compared to the GP group, the MK group showed greater total facial height and eye width, lesser lower-facial height, and lesser facial, lower-facial, and nasal widths. Moreover, compared to the GP group, the MK group had more protruded noses with greater nasolabial angle, greater vertical curvature of the foreheads, lesser horizontal curvature of the cheek, and lesser lower-lip-and-chin volume. Conclusions: The MK group had longer faces but smaller lower lips and chins than did the GP group. The golden ratio was not matching the current facial esthetic standards. These data might be beneficial for treatment planning of patients undergoing orthognathic and plastic surgeries.