• 한국정밀공학회지
• /
• 제26권11호
• /
• pp.47-54
• /
• 2009

Spin coaters are the essential instruments in micro-fabrication processes, which apply uniform thin films to flat substrates. In this research, a spin coater diagnosis system is developed to detect the abnormal operation of TFT-LCD process in real time. To facilitate the real-time data acquisition and analysis, the circular-buffered continuous data transfer and the short-time Fourier transform are applied to the fault diagnosis system. To determine whether the system condition is normal or not, a steady-state detection algorithm and a frequency spectrum comparison algorithm using confidence interval are newly devised. Since abnormal condition of a spin coater is rarely encountered, algorithm is tested on a CD-ROM drive and the developed program is verified by a function generator. Actual threshold values for the fault detection are tuned in a spin coater in process.

• The Journal of the Acoustical Society of Korea
• /
• 제16권1E호
• /
• pp.24-28
• /
• 1997

Ultrasonic relaxation measurements for imidazole and its derivative in phosphate buffer exhibit a high peak of absorption at neutral pH. Near neutral pH, protolysis and hydrosis may be neglected and the essential reaction only consists of a direct proton-exchange. The kinetics constants and the volume changes for the proton transfer reaction with the protonated imidazole and 2-methylimidazole have been determined at 25℃. The kinetics constants are 7.2×108s-1M-1for imidazole and 1.7×108s-1M-1 for 2-methylimidazole. The kinetics constants are used to estimate the spectrum of relaxation times and acoustic relaxation amplitude associated with intermolecular and intramolecular proton-exchange reactions in bilogical media. It is concluded that the magnitude of the acoustic absorption reasonalbly attributable to the perturbation of proton-transfer equilibria between imidazole and inorganic phosphate is comparable in magnitude with the acoustic absorption observed in some intact tissues.

• 대한수학회지
• /
• 제50권6호
• /
• pp.1333-1348
• /
• 2013

Given a faithful flow ${\alpha}$ on a $C^*$-algebra A, when A is ${\alpha}$-simple we will show that the closed subalgebra of A consisting of elements with non-negative Arveson spectra is maximal if and only if the crossed product of A by ${\alpha}$ is simple. We will also show how the general case can be reduced to the ${\alpha}$-simple case, which roughly says that any flow with the above maximality is an extension of a trivial flow by a flow of the above type in the ${\alpha}$-simple case. We also propose a condition of essential maximality for such closed subalgebras.

• 대한수학회지
• /
• 제57권4호
• /
• pp.893-913
• /
• 2020

Let 𝓢 be the collection of the operator matrices $\(\array{A&C\\Z&B}\)$ where the range of C is closed. In this paper, we study the properties of operator matrices in the class 𝓢. We first explore various local spectral relations, that is, the property (β), decomposable, and the property (C) between the operator matrices in the class 𝓢 and their component operators. Moreover, we investigate Weyl and Browder type spectra of operator matrices in the class 𝓢, and as some applications, we provide the conditions for such operator matrices to satisfy a-Weyl's theorem and a-Browder's theorem, respectively.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.346.2-346.2
• /
• 2014

To use the GaN based light-emitting diodes (LEDs) as solid state lighting sources, the improvement of light extraction and internal quantum efficiency is essential factors for high brightness LEDs. In this study, we suggested the new materials system of a zinc tin oxide (ZTO) layer formed on blue LED epi-structures to improve the light extraction. ZTO is a representative n-type oxide material consisted of ZnO and SnO system. Moreover, ZTO is one of the promising oxide semiconductor material. Even though ZTO has higher chemical stability than IGZO owing to its SnO2 content this has high mobility and high reliability. After formation of ZTO layer on p-GaN layer by using the spin coating method, structural and optical properties are investigated. The x-ray diffraction (XRD) measurement results show the successful formation of ZTO. The photoluminescence (PL) and absorption spectrum shows that it has 3.6-4.1eV band gap. Finally, the light extraction properties of ZTO/LED chip using electroluminescence (EL) measurement were investigated. The experimental and theoretical analyses were simultaneously conducted.

• 수산해양기술연구
• /
• 제36권4호
• /
• pp.337-346
• /
• 2000

Earthquake is a natural disaster accompanied by damage of human and properties caused by the ground motion, crustal movements, faults as well as tidal wave. The earthquake is known to occur mostly in earthquake-prone areas and the Korean Peninsula is known to be relatively safe in terms of geological characteristics. In order to withstand on severe environmental dynamic random load such as an earthquake, the large structure need to be designed to withstand the anticipated seismic tremor. The seismetic design is essential for building structures, bridges, and large structures which is handles explosive gases. Thus, the necessity of earthquake resistant analysis for large structure is growing and the capability of dynamic analysis should be obtained. In this thesis, dynamic responses of a high building(height 60m, width 18) which subjected to random earthquake load are presented which responses are derived using dynamic analysis methods such as response spectrum analysis, mode superposition and direct integration. Each results are also compared to review the merit of each methods.

• The Korean Journal of Pain
• /
• 제24권2호
• /
• pp.112-114
• /
• 2011

Due to its complex pathophysiology and wide spectrum of clinical manifestations, the diagnosis of CRPS is often missed in the early stage by primary care physicians. After being treated by a primary care physician for 5 months for chronic cellulitis, a 16-year-old girl was referred to our hospital with features of type-1 CRPS of the right upper extremity. Inability to diagnose early caused prolonged suffering to the girl with all the consequence of CRPS. The patient responded well with marked functional recovery from multimodal therapy. Ability to distinguish CRPS from other pain conditions, referral for specialty care at the appropriate time and full awareness of this condition and its clinical features among various healthcare professionals are essential in reducing patient suffering and stopping its progression towards difficult-to-treat situations.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 봄 학술발표회 논문집
• /
• pp.446-453
• /
• 2001

System-level ductility is an essential parameter for seismic performance evaluation of multistory building structures. The ductility demands for single degree of freedom structures or individual structural members can be determined easily. However, there is no clearly established method to determine the ductility demands for structural systems. The system ductility demands are estimated in this study by the equivalent SDOF system methods and proposed method which used the representative responses obtained from the MDOF systems directly. And seismic performance of building structures is evaluated by the modified Capacity Spectrum Method using the representative responses, and the result was compared with those of the inelastic time history analysis.

• 통합자연과학논문집
• /
• 제7권4호
• /
• pp.234-240
• /
• 2014

C-C chemokine receptor type 4 (CCR4) is a chemokine receptor with seven transmembrane helices and it belongs to the GPCR family. It plays an important role in asthma, lung disease, atopic dermatitis, allergic bronchopulmonary aspergillosis, cancer, inflammatory bowel disease, the mosquito-borne tropical diseases, such as dengue fever and allergic rhinitis. Because of its role in wide spectrum of disease processes, CCR4 is considered to be an important drug target. Three dimensional structure of the protein is essential to determine the functions. In the present study homology modeling of human CCR4 was performed based on crystal structure of CCR5 chemokine receptor. The generated models were validated using various parameters. Among the generated homology models the best one is selected based on validation result. The model can be used for performing further docking studies to identifying the critical interacting residues.

• 전자공학회논문지A
• /
• 제30A권12호
• /
• pp.98-107
• /
• 1993

This paper describes a design of a multi-bit oversampling noise-shaping D/A converter which achieves a resolution of 12 bits using oversampling technique. In the architecture the essential block which determines the whole accuracy is the analog internal D/A converter, and the designed charge-integration internal D/A converter adopts a differential structure in order to minimize the reduction of the resolution due to process variation. As the proposed circuit is driven by signal clocks which contains the information of the data variation from the noise-shaping coder, it minimizes the disadvantage of a charge-integration circuit in the time axis. In order to verify the circuit, it was integrated with the active area of 950$\times$650${\mu}m^{2}$ in a double metal 1.5-$\mu$m CMOS process, and testified that it can achieve a S/N ratio of 75 dB and a S/(N+D) ratio of 60 dB for the signal bandwidth of 9.6 kHz by the measurement with a spectrum analyzer.