• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4A
• /
• pp.450-457
• /
• 2008

One of very essential techniques for enlarging lifetime of energy-constrained wireless personal area network (WPAN) devices is energy-efficient transmission technique. If the WPAN is operated based on a TDMA protocol, the satisfaction of QoS requirements at each allocated time slot is another important factor to be considered. We therefore propose an energy-efficient transmission scheme for WPANs operating with a contention-free medium access protocol such as TDMA, as well as satisfying QoS requirement. The proposed algorithm determines the optimum combination of transmit power, physical data rate and fragment size required to simultaneously minimize the energy consumption and satisfy the required QoS in each assigned time duration, considering all the possible energy-minimization related parameters. The proposed algorithm demonstrated the improved performance results in terms of throughput and energy consumption via computer simulation.

• Journal of Sensor Science and Technology
• /
• v.24 no.4
• /
• pp.264-269
• /
• 2015

An infrared (IR) bolometer measures the change of resistance by absorbing incident IR radiation and generates a signal as a function of the radiation intensity. Since a bolometer requires temperature stabilization and light filtering except for the infrared rays, it is essential for the device to be packaged meeting conditions that above mentioned. Minimization of heat loss is needed in order to stabilize temperature of bolometer. Heat loss by conduction or convection requires a medium, so the heat loss will be minimized if the medium is a vacuum. Therefore, vacuum packaging for bolometer is necessary. Another important element in bolometer packaging is germanium (Ge) window, which transmits IR radiation to heat the bolometer. To ensure a complete transmittance of IR light, anti-reflection (AR) coatings are deposited on both sides of the window. Although the transmittance of Ge window is high for IR rays, it is difficult to use frequently in low-price IR bolometer because of its high price. In this paper, we fabricated IR window by utilizing silicon (Si) substrate instead of Ge in order to reduce the cost of bolometer packaging. To enhance the IR transmittance through Si substrate, it is textured using Reactive Ion Etching (RIE). The texturing process of Si substrate is performed along with the change of experimental conditions such as gas ratio, pressure, etching time and RF power.

• Advances in concrete construction
• /
• v.2 no.4
• /
• pp.249-259
• /
• 2014

Mortar is a masonry product which is matrix of concrete. It consists of binder and fine aggregate and moreover, it is an essential associate in any reinforced structural construction. The strength of mortar is a special concern to the engineer because mortar is responsible to give protection in the outer part of the structure as well as at a brick joint in masonry wall system. The purpose of this research is to investigate the compressive strength and tensile strength of mortar, which are important mechanical properties, by replacing the cement and sand by stone dust. Moreover, to minimize the increasing demand of cement and sand, checking of appropriateness of stone dust as a construction material is necessary to ensure both solid waste minimization and recovery by exchanging stone dust with cement and sand. Stone dust passing by No. 200 sieve, is used as cement replacing material and retained by No. 100 sieve is used for sand replacement. Sand was replaced by stone dust of 15%, 20%, 25%, 30%, 35%, 40%, 45% and 50% by weight of sand while cement was replaced by stone dust of 3%, 5%, and 7% by weight of cement. Test result indicates that, compressive strength of specimen mix with 35% of sand replacing stone dust and 3% of cement replacing stone dust increases 21.33% and 22.76% respectively than the normal mortar specimen at 7 and 28 days while for tensile it increases up to 13.47%. At the end, optimum dose was selected and crack analysis as well as discussion also included.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.8
• /
• pp.2196-2203
• /
• 1999

This paper describes the bus scheduling problem and register optimization method in datapath synthesis. Scheduling is process of operation allocation to control steps in order to minimize the cost function under the given circumstances. For that purpose, we propose some formulations to minimize the cost function for bus assignment to get an optimal and minimal cost function in hardware allocations. Especially, bus and register minimization technique are fully considered which are the essential topics in hardware allocation. Register scheduling is done after the operation and bus scheduling. Experiments are done with the DFG model of fifth-order digital ware filter to show its effectiveness. Structural integer programming formulations are used to solve the scheduling problems in order to get the optimal scheduling results in the integer linear programming environment.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.22 no.2
• /
• pp.83-100
• /
• 1980

This study was intended to computerize the structural analysis of two-dimensional continuum by finite element method, and to provide a preparatory basis for more sophisticated and more generalized computer programs of this kind. A computer program, applicable to any shape of two-dimensional continuum, was formulated on the basis of 16-degree-of- freedom rectangular element. Various computational aspects pertaining to the implementation of finite element method were reviewed and settled in the course of programming. The validity of the program was checked through several case studies. To assess the accuracy and the convergence characteristics of the method, the results computed by the program were compared with solutions by other methods, namely the analytical Navier's method and the framework method. Through actual programming and analysis of the computed results, the following facts were recognized; 1) The stiffness matrix should necessarily be assembled in a condensed form in order to make it possible to discretize the continuum into practically adequate number of elements without using back-up storage. 2) For minimization of solution time, in-core solution of the equilibrium equation is essential. LDLT decomposition is recommended for stiffness matrices condensed by the compacted column storage scheme. 3) As for rectangular plates, the finite element method shows better performances both in the accuracy and in the rate of convergence than the framework method. As the number of elements increases, the error of the finite element method approaches around 1%. 4) Regardless of the structural shape, there is a uniform tendency in convergence characteristics dependent on the shape of element. Square elements show the best performance. 5) The accuracy of computation is independent of the interpolation function selected.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.1
• /
• pp.39-49
• /
• 2018

In the satellite operation phase, a ground station should continuously monitor the status of the satellite and sends out a tasking order, and a satellite should transmit data acquired in the space to the Earth. Therefore, the communication between the satellites and the ground stations is essential. However, a satellite and a ground station located in a specific region on Earth can be connected for a limited time because the satellite is continuously orbiting the Earth, and the communication between satellites and ground stations is only possible on a one-to-one basis. That is, one satellite can not communicate with plural ground stations, and one ground station can communicate with plural satellites concurrently. For such reasons, the efficiency of the communication schedule directly affects the utilization of the satellites. Thus, in this research, considering aforementioned unique situations of spacial communication, the mixed integer programming (MIP) model for the optimal communication planning between multiple satellites and multiple ground stations (MS-MG) is proposed. Furthermore, some numerical experiments are performed to verify and validate the mathematical model. The practical example for them is constructed based on the information of existing satellites and ground stations. The communicable time slots between them were obtained by STK (System Tool Kit), which is a well known professional software for space flight simulation. In the MIP model for the MS-MG problems, the objective function is also considered the minimization of communication cost, and ILOG CPLEX software searches the optimal schedule. Furthermore, it is confirmed that this study can be applied to the location selection of the ground stations.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.7
• /
• pp.13-23
• /
• 2011

Grid computing is a new generation computing technology which organizes virtual high-performance computing system by connecting and sharing geographically distributed heterogeneous resources, and performing large-scaled computing operations. In order to maximize the performance of grid computing, job scheduling is essential which allocates jobs to resources effectively. Many studies have been performed which minimize total completion times, etc. However, resource costs are also important, and through the minimization of resource costs, the overall performance of grid computing and economic efficiency will be improved. So in this paper, we propose a multi-objective job scheduling model considering both time and cost. This model derives from the optimal scheduling solution using NSGA-II, which is a multi objective genetic algorithm, and guarantees the effectiveness of the proposed model by executing experiments with those of existing scheduling models such as Min-Min and Max-Min models. Through experiments, we prove that the proposed scheduling model minimizes time and cost more efficiently than existing scheduling models.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.5
• /
• pp.128-137
• /
• 2009

This research aimed at providing the direction for future improvement of broadcast subtitle design by identifying the user perception on broadcast subtitles of Terrestrial DMB. First, we contemplated on the existing research about broadcast subtitles. As a result, we found out that broadcast subtitle plays an essential role when watching a program and that the minimization of letters, clear fonts and color arrangement, rearrangement of components were identified as main factors that increase readability. However, the terrestrial DMB user evaluation on image quality, composition, color and brightness was not that positive. In addition, the evaluation on the readability of broadcast subtitle, information transmission, subtitle composition, letter font, number and size of letter was more negative. Developing a subtitle design which considers user convenience and suits terrestrial DMB screens in aspects of broadcast subtitle form and composition, limit of information, clearness and size of the letter is required.

• Ocean Systems Engineering
• /
• v.2 no.3
• /
• pp.217-228
• /
• 2012

As the size of container ships continues to increase, not many existing harbors can host the super-container ship due to its increased draft and the corresponding dredging requires huge budget. In addition, the minimization of waiting and loading/offloading time is the most important factor in harbor competitiveness. In this regard, mobile-harbor concept has been developed in Korea to achieve much improved harbor capacity and efficiency. In developing the concept, one of the most important elements is the operability of crane between two or more floating bodies in side-by-side arrangement. The container ship is to be stationed through a hawser connection to an outside-harbor fixed-pile station with the depth allowing its large draft. The mobile harbors with smart cranes are berthed to the sides of its hull for loading/offloading containers and transportation. For successful operation, the relative motions between the two or more floating bodies with hawser/fender connections have to be within allowable range. Therefore, the reliable prediction of the relative motions of the multiple floating bodies with realistic mooring system is essential to find the best hull particulars, hawser/mooring/fender arrangement, and crane/docking-station design. Time-domain multi-hull-mooring coupled dynamic analysis program is used to assess the hydrodynamic interactions among the multiple floating bodies and the global performance of the system. Both collinear and non-collinear wind-wave-current environments are applied to the system. It is found that the non-collinear case can equally be functional in dynamics view compared to the collinear case but undesirable phenomena associated with vessel responses and hawser tensions can also happen at certain conditions, so more care needs to be taken.

• Journal of Environmental Impact Assessment
• /
• v.21 no.1
• /
• pp.119-132
• /
• 2012

Biodiversity is a key element of ecosystem of which function provides essential product and service in human life. In the course since development projects often causes damages to biodiversity, environmental impact assessment technique must be capable of accurately assessing potential impact from flora and fauna and to entire ecosystem. Korea needs improvement of its assessment technique that is compatible with Korean environmental regulatory standard that is generally stricter than that of most countries. This study attempts to explore both domestic and overseas biodiversity assessment techniques and analyze each stage of environmental impact assessment. The data is collected from numbers of literatures selected by navigating both domestic and overseas literature database with certain keywords. Among the 44 selected papers, overseas publications outnumber those of domestics, and there are more researches on assessment methodology of biodiversity than assessment tool and model. In terms of environmental impact assessment, the number of papers on environmental impact forecast exceeds the numbers of papers on current state of environment and the impact minimizing solution. Therefore, contents and trends of those researches in the different stages of environmental impact assessment discussed in this paper not only suggest potential impact on biodiversity and minimization solutions in detail, but is also a valuable resource particularly for biodiversity relevant environmental assessment technique improvement in Korea. Proposing of a new direction of improvement in biodiversity assessment techniques makes this study significant, and further research for preservation of biodiversity should follow up to provide an improvement scheme for biodiversity assessment techniques in the future.