• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.3
• /
• pp.283-289
• /
• 2015

In this paper, a GNSS interference detection algorithm based on an adaptive fading Kalman filter is proposed to detect a spoofing signal which is one of the threatening GNSS intentional interferences. To detect and mitigate the spoofing signal, the fading factor of the filter is used as a detection parameter. For simulation, the effect of the spoofing signal is modeled by the ramp type bias error of the pseudorange to emulate a smart spoofer and the change of the fading factor value according to ramp type bias error is quantitatively analyzed. In addition, the detection threshold is established to detect the spoofing signal by analyzing the change of the error covariance and the effect of spoofing is mitigated by controlling the Kalman gain of the filter. To verify the performance analysis of the proposed algorithm, various simulations are implemented. Through the results of simulations, we confirmed that the proposed algorithm works well.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.5
• /
• pp.400-404
• /
• 2015

In this paper, we study for direction of arrival MUSIC spatial spectrum algorithm in order to desired signal estimation in spatial. Proposal MUSIC spatial spectrum algorithm in paper use model error and Bayesian method to estimation on correct target position. Receiver array response vector using adaptive array antenna use Bayesian method, and target position estimate to update weight value with model error method. Target's signal estimation of desired direction of arrival in this paper apply weight value of signal covariance matrix for array response vector after removing incident signal interference and noise, respectively. Though simulation, we analyze to compare proposed method with general method.

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.4
• /
• pp.141-147
• /
• 2014

The wavelet shrinkage is a technique that reduces the wavelet coefficients to minimize the MSE(Mean Square Error) between the signal and the noisy signal by making use of the threshold determined by the variance of the wavelet coefficients. In this paper, by using the monotonic transform and the power of wavelet subbands, new thresholds applicable to the high and the low frequency wavelet bands are proposed, and the thresholds are applied to the ST(soft-threshold) technique to denoise on image signals with additive Gaussian noise. And the results of PSNRs are compared with the results obtained by the VisuShrink technique and those of [15]. The results shows the validity of this technique.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.4
• /
• pp.573-577
• /
• 2015

In this paper, we propose a signal processing board suitable for a semi-active laser tracking to detect an optical signal generated from the laser target designator by applying an analog trigger signal, the quadrant photodetector and a high speed ADC(analog-digital converter) sampling technique. We improved the stability by applying the averaging method to minimize the measurement error of a gaussian pulse. To evaluate the performances of the proposed methods, we implemented a prototype board and performed experiments. As a result, we implemented a frequency counter with an error 14.9ns in 50ms. PRF error code has a stability of less than 1.5% compared to the NATO standard. Applying the three point averaging method to ADC sampling, the stability of 28% in X-axis and 22% in Y-axis than one point sampling was improved.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.1
• /
• pp.7-13
• /
• 2021

This paper proposes a method to minimize the target's direction detection error using RADAR. The radar system cannot accurately detect the target direction due to the phase error of he received signal. The proposed method of this study obtains a phase by applying an root mean square to each antenna incident signal, and reduces the phase error by using an optimal signal to noise ratio. In the simulation result, the probability of detecting the target direction is the best when the antenna spacing is half wavelength. The conventional method of direction detection probability 10-1.7 and the proposed method is 10-3.3. The target detection direction of the existing method represents [-8°,8°] with an error of 2 degrees. The target detection direction of the proposed method is shown in [-10°,10°], and all target directions are accurately detected. In the future, There is need for a method to reduce the phase error even though the resolution decrease.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.1
• /
• pp.11-17
• /
• 2009

This paper deals with the estimation performance DoA (Direction of Arrival) using the 3D adaptive array antenna in W-CDMA signal. For this, we proposed the 5 types of 3D array antenna, and appied for the MUSIC in order to the estimation of DoA algorithm for that antenna, commonly, then the DoA estimation error was used for the estimation performance. In the mobile communication and radio positioning service, performing the spatial filtering after the DoA estimation in array antenna, the quality of receiving signal can improve by the nulling or minimization of interfering signal which is from the undesired direction and the forming of beam which is from the desired direction. The result of DoA estimation and the DoA estimation error by varying the signal to noise ration and the number of interfering signal and power of each type antenna was calculated by computer simulation. As a result of simulation, the other propose antenna has good performance excluding the stack 3D antenna in DoA estimation and the Curved-B type antenna has more superior performance when increasing the number of interfering signal and power in the DoA estimation error.

• Journal of Navigation and Port Research
• /
• v.34 no.7
• /
• pp.511-516
• /
• 2010

GPS anomaly has increased according to the degradation of satellite performance, and many GPS users could be exposed to any kinds of error-included signals without any previous notice when unscheduled error occurred. RSIM (Reference Station Integrity Monitors) is a typical monitoring method to broadcast PRC (Pseudo Range Correction) for users. However, there were some cases that the receiver detected the anomalous satellite's signal even though it was unhealthy set, consequently it occurred a large range error. Then it is important to monitor the integrity of GPS signal and it is needed to devise the correction method of pseudorange by eliminating error-occurred PRN for notification to GPS users when it is monitored that the anomaly occurred. This paper proposes the basic concept of how to correct the pseudorange. The paper also shows the analysis results of PRN10 GPS anomaly occurred on day 39 in 2007 with corrected results by eliminating anomaly satellite (PRN10). The proposed correction method shows decreased pseudorange error range compared to the case when the anomaly satellite were used.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.6
• /
• pp.67-75
• /
• 1998

Although the nCE(n-th order cross-entropy) error function resolves the incorrect saturation problem of conventional EBP(error back-propagation) algorithm, the performance of MLP's (multilayer perceptrons) trained using the nCE function depends heavily on the order of the nCE function. In this paper, we propose an adaptive learning rate to make the performance of MLP's insensitive to the order of the nCE error. Additionally, we propose a limited error signal of output node to prevent unstable learning due to the adaptive learning rate. The effectiveness of the proposed method is demonstrated in simulations of handwritten digit recognition and thyroid diagnosis tasks.

• ETRI Journal
• /
• v.33 no.4
• /
• pp.528-536
• /
• 2011

In this paper, we analyze the location accuracy of real-time locating systems (RTLSs) in multipath environments in which the RTLSs comply with the ISO/IEC 24730-2 international standard. To analyze the location error of RTLS in multipath environments, we consider a direct path and indirect path, in which time and phase are delayed, and also white Gaussian noise is added. The location error depends strongly on both the noise level and phase difference under a low signal-to-noise ratio (SNR) regime, but only on the noise level under a high SNR regime. The phase difference effect can be minimized by matching it to the time delay difference at a ratio of 180 degrees per 1 chip time delay (Tc). At a relatively high SNR of 10 dB, a location error of less than 3 m is expected at any phase and time delay value of an indirect signal. At a low SNR regime, the location error range increases to 8.1 m at a 0.5 Tc, and to 7.3 m at a 1.5 Tc. However, if the correlation energy is accumulated for an 8-bit period, the location error can be reduced to 3.9 m and 2.5 m, respectively.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.7
• /
• pp.684-690
• /
• 2015

This paper presents a modified residual-based EKF (Extended Kalman Filter) for performance improvement of indoor positioning using WiFi RSSI (Received Signal Strength Indicator) measurement. Radio signal strength in indoor environments may have irregular attenuation characteristics due to obstacles such as walls, furniture, etc. Therefore, the performance of the RSSI-based positioning with the conventional trilateration method or Kalman filter is insufficient to provide location-based accurate information services. In order to enhance the performance of indoor positioning, in this paper, error analysis of the distance calculated by using the WiFi RSSI measurement is performed based on the radio propagation model. Then, an IARM (Irregularly Attenuated RSSI Measurement) error is defined. Also, it shows that the IARM error is included in the residual of the positioning filter. The IARM error is always positive. So, it is presented that the IARM error can be estimated by taking the absolute value of the residual. Consequently, accurate positioning can be achieved based on the IEM (IARM Error Mitigated) EKF with the residual modified by using the estimated IARM error. The performance of the presented IEM EKF is verified experimentally.