• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.3
• /
• pp.129-141
• /
• 2023

Crop models have been used to predict yield under diverse environmental and cultivation conditions, which can be used to support decisions on the management of forage crop. Cultivar parameters are one of required inputs to crop models in order to represent genetic properties for a given forage cultivar. The objectives of this study were to compare calibration and ensemble approaches in order to minimize the uncertainty of crop yield estimates using the SIMPLE crop model. Cultivar parameters were calibrated using Log-likelihood (LL) and Generic Composite Similarity Measure (GCSM) as an objective function for Metropolis-Hastings (MH) algorithm. In total, 20 sets of cultivar parameters were generated for each method. Two types of ensemble approach. First type of ensemble approach was the average of model outputs (E_em), using individual parameters. The second ensemble approach was model output (E_pm) of cultivar parameter obtained by averaging given 20 sets of parameters. Comparison was done for each cultivar and for each error calculation methods. 'Jowoo' and 'Yeongwoo', which are forage rice cultivars used in Korea, were subject to the parameter calibration. Yield data were obtained from experiment fields at Suwon, Jeonju, Naju and I ksan. Data for 2013, 2014 and 2016 were used for parameter calibration. For validation, yield data reported from 2016 to 2018 at Suwon was used. Initial calibration indicated that genetic coefficients obtained by LL were distributed in a narrower range than coefficients obtained by GCSM. A two-sample t-test was performed to compare between different methods of ensemble approaches and no significant difference was found between them. Uncertainty of GCSM can be neutralized by adjusting the acceptance probability. The other ensemble method (E_pm) indicates that the uncertainty can be reduced with less computation using ensemble approach.

• The Journal of Korean Society for Radiation Therapy
• /
• v.35
• /
• pp.7-13
• /
• 2023

Purpose: In this study, we evaluated the effect of using a customized bolus on dose delivery in the treatment plan when cervical cancer protruded out of the body along with the uterus and evaluated reproducibility in patient set-up. Materials & Methods: The treatment plan used the Eclipse Treatment Planning System (Version 15.5.0, Varian, USA) and the treatment machine was VitalBeam (Varian Medical Systems, USA). The radiotherapy technique used 6 MV energy in the AP/PA direction with 3D-CRT. The prescribed dose is 1.8 Gy/fx and the total dose is 50.4 Gy/28 fx. Semiflex TM31010 (PTW, Germany) was used as the ion chamber, and the dose distribution was analyzed and evaluated by comparing the planned and measured dose according to each position movement and the tumor center dose. The first measurement was performed at the center by applying a customized bolus to the phantom, and the measurement was performed while moving in the range of -2 cm to +2 cm in the X, Y, and Z directions from the center assuming a positional error. It was measured at intervals of 0.5 cm, the Y-axis direction was measured up to ±3 cm, and the situation in which Bolus was set-up incorrectly was also measured. The measured doses were compared based on doses corrected to CT Hounsfield Unit (HU) 240 of silicon instead of the phantom's air cavity. Result: The treatment dose distribution was uniform when the customized bolus was used, and there was no significant difference between the prescribed dose and the actual measured value even when positional errors occurred. It was confirmed that the existing sheet-type bolus is difficult to compensate for irregularly shaped tumors protruding outside the body, but customized Bolus is found to be useful in delivering treatment doses uniformly.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.1
• /
• pp.117-124
• /
• 2009

The p-convergent boundary element method has been proposed to analyze two-dimensional potential problem on the basis of high order Legendre shape functions that have different property comparing with the shape functions in conventional boundary element method. The location of nodes corresponding to high order shape function are not defined along the boundary, called by nodeless node, similar to the p-convergent finite element method. As the order of shape function increases, the collocation point method is used to solve linear simultaneous equations. The collocation patterns of p-convergent boundary element method consist of non-symmetric hierarchial or symmetric non-hierarchical. As the order of shape function increases, the number of collocation point increases. The singular integral that appears in p-convergent boundary element has been calculated by special numeric quadrature technique and semi-analytical integration technique. The L-shape domain problem including singularity in the vicinity of reentrant comer is analyzed and the numerical results show that the relative error is smaller than $10^{-2}%$ range as compared with other results in literatures. In case of same condition, the symmetric p-collocation point pattern shows high accuracy of solution.

• Journal of Korean Academy of Nursing Administration
• /
• v.1 no.2
• /
• pp.268-284
• /
• 1995

This study was designed to test effects of nursing ethics education (NEE) on moral reasoning and ethical decision making of subjects. This NEE that was teached for 10 hours course was composed of these : Nurses' ethical code, moral responsibility, Moral value and professional accountability, Respect for human life, General ethics, Theory and Norms of biomedical ethics, Ethical decision making model and Discussion about hypothetical ethical dilemmas Twenty-five senior student nurses were sampled from four year college of nursing from Nov. 3rd, 1993 to Nov. 24th, 1993. Data were collected through self-reported questionnaires included two kinds of tests. Rest's Defining Issues Test was adopted to measure the stage of moral development, which was classified with the stage 2 (instrumental relativist orientation), the stage 3 (interpersonal concordance), the stage 4 (law and order), the stage 5A (societal consensus), and the stage 5B (intuitional humanism), the stage 6 (universal ethical practice). In particular, the level of principled thinking (P) was measured by summing these scores of the stages 5A, 5B, and 6. The possible range of P is 0 to 95. As for measuring the levels of morality and nursing dilemma, Crisham's Nursing Dilemma Test was adopted. This test generated the morality score(MS) and the dilemma score (DS). The data were analyzed by t-test, ANOVA, Kruskal-Wallis test, Mc Nemar's test and Pearson correlation coefficients. The results were as follows ; 1. For the Moral Reasoning both before and after NEE, The Mean score of the stage 5A was significantly higher than that of other stages.(P=0.0001) Before NEE, the mean score of the stage 4 was significantly different from stage 2, 3, 5A, and after NEE, different from stage 2, 5B,6. 2. The analysis of change of moral development level revealed that the score of stage 4 increased after NEE.(P=0.0004) 3. The Effect of NEE for the mean score of 5A, 6, P after education was significantly different by birth place. 4. With regard to the five dilemmas postulated such as forcing medication performing cardiac pulmonary resuscitation, reporting a medication error, informing diagnosis to terminally ill adult, and providing new-nurse orientation, the mean score of the MS and the DS was no significant difference with general characteristics of the students. Effect of NEE morality score and dilemma score after education was no significant difference. 5. As for the correlations between moral reasoning and decision making, the score of the stage 2, 5A, 6, DS was positively correlated with the scores of before and after. Positive correlation was also observed between the scores of stage 2 and stage 4, stage 3 and 6. On the other hand, the score of P was negatively correlated with the scores of stage 2 and of stage 4 and of stage 5A. The score of the stage 5A was also negatively correlated with the score of the sge 6.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.6
• /
• pp.439-446
• /
• 2011

In this research, enhanced land-cover classification methods using high-resolution satellite image (HRSI) and GIS in terms of practicality and accuracy was proposed. It aims for understanding non-point pollutant origin/loading, assessment the efficiency of rainfall storage/infiltration facilities and sounds water-environment management. The result of applying enhanced land-cover classification methods to the urban region verifies that roof and road area are including various vegetations such as roof garden, flower bed in the median strip and street tree. This accounts for 3% of total study area, and more importantly it was counted as impervious area by GIS alone or conventional indoor work. The feasibility of the method was assessed by applying to rainfall-runoff analysis for three weak rainfall in the range of 7.1-10.5 mm events in 2000, Chiba, Japan. A good agreement between simulated and observed runoff hydrograph was obtained. In comparison, the hydrograph simulated with land-use parameters by the detailed land-use information of 10m grid had an error between 31%~71%, while enhanced method showed 4% to 29%, and showed the improvement particularly for reproducing observed peak and recession flow rate of hydrograph in weak rainfall condition.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.4
• /
• pp.152-163
• /
• 2012

At the conceptual phase of a construction project, estimated construction cost is very important as it significantly influences the owner's decision-making. Accurate cost estimating, in the early stage of a public construction project, serves as a critical factor because initial decision-making effects the final cost of a construction project. However in the cases of Korean public apartment projects, excluding a few of the public owners, there is a problem in properly estimating construction cost due to the lack of construction cost estimating system. Thus, this research developed a public apartment cost estimating system using case-based reasoning that was suggested by a previous research with 66 cases of Korean public apartment projects. Based on the system experiments involving 19 public officers and 10 cases of Korean public apartment projects, the effectiveness of the system in terms of estimation accuracy and user-friendly was confirmed. As a result, the developed system has an error range of 1.47% to 13.74% and mean of 6.15%. In addition, the system was evaluated that it could greatly improve the current estimation task of public officers. Consequently, the results of this research can be used as a foundation for a technological advance in estimating construction cost and improving the accuracy and consistency of construction cost estimation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.2
• /
• pp.120-131
• /
• 2009

This study measured the centripetal force and effective scope of the population spread from urban center and subcenters in order to diagnose the urban spatial structure of the formation of a multicentric city structure in Busan. The study analyzed the variability of the determination coefficient value (R square) with a negative exponential function derived from the population density model by extending the circular region into 5-km units. The aim of this study was to measure changes in the effective scope of the population centripetal force of the urban center and subcenter in 5-year intervals from 1995 to 2005 using census data. The explanatory adequacy of the population density function was examined with the bias of the function to calculate the distance error between the real location of the urban center and the optimal location, according to the population density function. To summarize the results, the value for the area of Jungangdong showed a continuous reduction, whereas Seomyeon (Bujeondong) maintained explanatory adequacy without a large change. As a whole, Busan was in the process of continuous diversification, in spite of its reduced population. Therefore, it appears necessary to strengthen the function of the urban center and subcenter and to supply adequate dwelling zones close to downtown to form a more efficient urban spatial structure. The results of the present study will be utilized as basic data for the formulation of a political approach to the efficient reorganization of spatial structure by correlating concrete spatial information with the population variability of Busan's urban center and subcenter.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.1
• /
• pp.181-189
• /
• 2013

This study was conducted to provide basic data in establishing a method for helping adolescents form the concept of correct oral health knowledge, by searching for their misconceptions about oral health knowledge and figuring out relevant factors. Results showed that they had appropriate knowledge on a relatively large number of questions regarding the level of oral health knowledge, but they also had misconceptions about the toothbrush grip, how to use medicines for gum diseases, and the project of fluorine concentration adjustment in water. It was shown that the score of oral health knowledge turned out to be 10.78 on average as a whole and the mean difference was within the error range. As for the correlations of misconceptions about oral health knowledge by group, it was noted that there were no differences in gender and education level, but those who completed oral health education had more appropriate concepts than those who did not (p < 0.001). In terms of the paths that they obtained oral health knowledge, the Internet and mass media (35.4%) had the highest rate and school (9.6%) had the lowest rate. With regards to the level of oral health knowledge, school had 10.56, which was the lowest score. In this regard, in order for adolescents to form adequate oral health knowledge, the following should be done. therefore, it would be necessary to activate school oral health education so as for adolescents to exercise adequate oral health behavior and to train many oral health educators so as for them to be provided with more educational opportunities.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.1
• /
• pp.60-69
• /
• 2016

Purpose: The objective of this study was to compare the accuracy of digital models from 3 dimentional (3D) optical scanner and cone beam computed tomography (CBCT). Materials and Methods: We obtained digital models from 11 pairs of stone casts using a 3D optical scanner and a CBCT, and compared the accuracy of the models. Results: The error range of average positive distance was 0.059 - 0.117 mm and negative distance was 0.066 - 0.146 mm. Statistically (P < 0.05), average positive distance was larger than $70{\mu}m$ and shorter than $100{\mu}m$, and that of negative distance was larger than $100{\mu}m$ and shorter than $120{\mu}m$. Conclusion: We concluded that the accuracy of digital models generated from CBCT is not appropriate to make final prostheses. However, it may be acceptable for provisional restorations and orthodontic diagnoses with respect to the accuracy of the digitalization.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.3
• /
• pp.167-174
• /
• 2016

Underwater communication is difficult to increase the communication capacity because the carrier frequency is lower than that of radio communications on land. This is limited to the bandwidth of the signal under the influence of the characteristics of an ocean medium. As the high transmission speed and large transmission capacity have become necessary in the limited frequency range, the studies on MIMO (Multiple Input Multiple Output) communication have been actively carried out. The performance of the MIMO communication is lower than that of the SIMO (Single Input Multiple Output) communication because cross-talk occurs due to multiusers along with inter symbol interference resulting from the channel characteristics such as delay spread and doppler spread. Although the adaptive equalizer considering multi-channels is used to mitigate the influence of the cross-talk, the algorithm is normally complicated. In this paper, time reversal mirror technique with the characteristic of a self-equalization will be applied to simplify the compensation algorithm and relieve the cross-talk in order to improve the communication performance when the signal transmitted from two channels is received over interference on one channel in the same time. In addition, the performance of the MIMO communication based on the time reversal mirror is verified using data from the SAVEX15(Shallow-water Acoustic Variability Experiment 2015) conducted at the northern area of East China Sea in May 2015.