• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.5
• /
• pp.781-793
• /
• 2020

In this paper, we propose a new RLWE-based scheme named μ-Hope that exploits Error Correcting Code(ECC) on NewHope. The previous parameters of NewHope uses 12289 as a prime modulus, and the size of the public key, private key, and ciphertext is 928-byte, 1888-byte, and 1120-byte respectively, which can be said to be larger than other RLWE based algorithms. In this paper, we propose μ-Hope, which changes modulus 12289 to 769 to reduce the size of the public key, private key, and ciphertext. Also, we adopts XE1 as an Error Correcting Code(ECC) to solve the increased decryption failure rate caused by using a small prime modulus. As a result, the size of the public key, private key, and ciphertext decreased by 38%, 37%, and 37% respectively. As the computational efficiency caused by using a small prime modulus exceeds the performance degradation by exploiting ECC, this result in 25% performance improvement for a single key exchange.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.2
• /
• pp.180-184
• /
• 2009

The memory is very sensitive to the soft error because the integration of the memory increases under low power environment. Error correcting codes (ECCs) are commonly used to protect against the soft errors. This paper proposes a new genetic ECC design method which reduces power consumption. Power is minimized using the degrees of freedom in selecting the parity check matrix of the ECCs. Therefore, the genetic algorithm which has the novel genetic operators tailored for this formulation is employed to solve the non-linear power optimization problem. Experiments are performed with Hamming code and Hsiao code to illustrate the performance of the proposed method.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.103-110
• /
• 2005

We present a powerful error control decoder which can be used in all of the commercial DVD systems. The decoder exploits the error information from the modulation decoder in order to increase the error correcting capability. We can identify that the modulation decoder in DVD system can detect errors more than $60\%$ of total errors when burst errors are occurred. In results, fur a decoded block, error correcting capability of the proposed scheme is improved up to $25\%$ more than that of the original error control decoder. In addition, the more the burst error length is increased, the better the decoder performance. Also, a pipeline-balanced RSPC decoder with a low hardware complexity is designed to maximize the throughput. The maximum throughput of the RSPC decoder is 740Mbps@100MHz and the number of gate counts is 20.3K for RS (182, 172, 11) decoder and 30.7K for RS (208, 192, 17) decoder, respectively

• ETRI Journal
• /
• v.30 no.6
• /
• pp.799-806
• /
• 2008

In this paper, a new design for an error correcting code (ECC) is proposed. The design is aimed to build an ECC circuitry with minimal power consumption. The genetic algorithm equipped with the symbiotic mechanism is used to design a power-efficient ECC which provides single-error correction and double-error detection (SEC-DED). We formulate the selection of the parity check matrix into a collection of individual and specialized optimization problems and propose a symbiotic evolution method to search for an ECC with minimal power consumption. Finally, we conduct simulations to demonstrate the effectiveness of the proposed method.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.5
• /
• pp.465-472
• /
• 2013

This paper presents a low-complexity triple-error-correcting parallel Bose-Chaudhuri-Hocquenghem (BCH) decoder architecture and its efficient design techniques. A novel modified step-by-step (m-SBS) decoding algorithm, which significantly reduces computational complexity, is proposed for the parallel BCH decoder. In addition, a determinant calculator and a error locator are proposed to reduce hardware complexity. Specifically, a sharing syndrome factor calculator and a self-error detection scheme are proposed. The multi-channel multi-parallel BCH decoder using the proposed m-SBS algorithm and design techniques have considerably less hardware complexity and latency than those using a conventional algorithms. For a 16-channel 4-parallel (1020, 990) BCH decoder over GF($2^{12}$), the proposed design can lead to a reduction in complexity of at least 23 % compared to conventional architecttures.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.5
• /
• pp.738-745
• /
• 2009

Underwater acoustic communication has multipath error because of reflection by sea-level and sea-bottom. The multipath of underwater channel causes receive signal to make error floor. In this paper, we propose the underwater communication system using various channel coding schemes such as RS coding, convolutional code, turbo code and concatenated code for overcoming the multipath effect in underwater channel. As shown in simulation results, characteristic of multipath error is similar to that of random error. So interleaver has not effect on error correcting. For correcting of error floor by multipath, it is necessary to use strong channel codes like turbo code. Turbo code is one of the iterative codes. And the performance of concatenated codes including RS code has better performance than using singular channel codes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.11
• /
• pp.1626-1634
• /
• 1993

In this paper we propose a coding scheme which combines source codes and error correcting codes in order to be robus to channel noise. One of the coding schemes that take into account both the source and the channel is the channel optimized quantizer (COQ) which simultaneously minimizes quantization noise and the noise due to channel errors. This paper deals with the problem of combining channel optimized quantizers with ECC to build an improved system. To be specific, we computed the performance of an n bit COQ and that of an n-1 bit COQ followed by an (n-1)/n punctured convolutional code. From this result whether or not the ECC are selected is determined by the number of allocated bits and the channel bit error rate. These results are applied to the image trans-mission method using DCT, and the system performances are evaluated.

• Journal of the Korean Data and Information Science Society
• /
• v.17 no.2
• /
• pp.437-447
• /
• 2006

Error Correcting Output Coding(ECOC) is used to solve multi-class problem. It is known that it improves the classification accuracy. In this paper, we compared various criteria to design code matrix while encoding. In addition. we prorpose an ensemble which uses the ability of each classifier while decoding. We investigate the justification of the proposed method through real data and synthetic data.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.5
• /
• pp.339-346
• /
• 1991

In this paper the performance of communication system in the electrical power line using error correcting codes is analysed. The BCH codes and interleaved code are to be used for correcting burst and random errors in the power line channels. The data rate of 2400 bps and the carrier frequency of 12KHz are assumed. Actual power line noise is recorded and simulated in the BPSK PLC system model.

• Journal of the Korean Data and Information Science Society
• /
• v.19 no.4
• /
• pp.1219-1231
• /
• 2008

The main object of this paper is to develop a leave-one-out(LOO) bound of all pairwise comparison error correcting output codes (APC-ECOC). To avoid using classifiers whose corresponding target values are 0 in APC-ECOC and requiring pilot estimates we developed a bound based on mean misclassification probability(MMP). It can be used to tune kernel hyperparameters. Our empirical experiment using kernel mean squared estimate(KMSE) as the binary classifier indicates that the bound leads to good estimates of kernel hyperparameters.