• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.739-742
• /
• 2006

In this paper, we propose a method for automatic generation of equivalent circuit for unit cell of LCDTV. In order to extract a circuit model, computer program generates electrical connectivity of resistors and capacitors from the layout through pattern analysis with electrode and port information. For combining two types of independent equivalent circuits, we propose a node insertion algorithm. As a consequence, we can generate an equivalent RC circuit without increasing the capacitive elements.

• International Journal of Contents
• /
• 제11권3호
• /
• pp.63-68
• /
• 2015

A novel unit cell for a high pass filter was designed based on a composite right/left-handed structure that uses a folded coplanar waveguide. The equivalent circuit model for the unit cell was extracted from the geometry of the unit cell, and the effect of each main parameter of the unit cell was analyzed. The equations to calculate the immittance values of the equivalent circuit elements were formulated, and moreover, the dispersion characteristics and energy the distributions of the electromagnetic fields were simulated to determine the characteristics of the composite right/left-handed structure. Finally, the high pass filters were implemented as a series of the proposed unit cells. We show that the experimental results were in good agreement with those obtained from the simulation. Thus, the high pass filter was found to achieve a baseband insertion loss of 3 dB and a stopband attenuation of 70 dB.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 추계 학술발표회
• /
• pp.291-311
• /
• 2006

The acceleration of consolidation by stone columns was mostly analysed within the framework of a basic unit cell model (i.e. a cylindrical soil body around a column). A method of converting the axisymmetric unit cell into the equivalent plane-strain model would be required for two-dimensional numerical modelling of multi-column field applications. This paper proposes two practical simplified conversion methods to obtain the equivalent plane-strain model of the unit cell, and investigates their applicability to multi-column reinforced ground. In the first conversion method, the soil permeability is matched according to an analytical equation, whereas in the second method, the column width is matched based on the equivalence of column area. The validity of these methods is tested by comparison with the numerical results of unit-cell simulations and with the field data from an embankment case history. The results show that for the case of linear-elastic material modelling, both methods produce reasonably accurate long-term consolidation settlements, whereas for the case of elasto-plastic material modelling, the second method is preferable as the first one gives erroneously lower long-term settlements, where plastic yielding of stone column are ignored.

• Journal of Electrical Engineering and Technology
• /
• 제11권2호
• /
• pp.463-469
• /
• 2016

In this paper, the use of a dual composite right/left-handed coplanar waveguide (CPW) transmission line is proposed for the design of a band rejection filter. The notch property of the filter is achieved by combining the convex signal line with the shorted concave meander line, and the equivalent circuit model is extracted from the geometry of the unit cell for organizing the band rejection property. Then the equivalent parameters of the unit cell are analyzed to identify those behaviors. And the dispersion characteristics and energy distributions are simulated. In the end, the band rejection filter is manufactured by cascading two proposed unit cells. We show that the measurement result for the resonant frequency demonstrates good agreement with the simulation result and the band rejection filter provides a rejection performance of 17.5 dB at the stopband frequency ranging from 869 MHz to 894 MHz.

• 한국정밀공학회지
• /
• 제28권5호
• /
• pp.623-631
• /
• 2011

Metallic sandwich panels based on a truss core structure have been developed for a wide range of potential applications with their lightweight and multi-functionality. Structural performance of sandwich panels can be predicted from the studies on mechanical behavior of a unit cell of truss core structures. Analytical investigations on the unit cell provide approximated guidelines for the design of overall core structures for a specific application in short time. In this study, the effects of geometrical parameters on mechanical behavior of a pyramidal shape of unit cell were investigated with analytical models. The unit cell with truss member angle of 45 degree was considered as reference model and other models were designed to have the same weight and projected area but different truss member angle. All truss members were assumed to be connected with pin joint in analytical models. Under the assumptions, the equivalent strength and stiffness of the unit cell under compressive and shear loads were predicted and compared. And finally, the optimum core member angle to have maximum mechanical property could be calculated and verified with FE analysis results.

• 대한전자공학회논문지TC
• /
• 제45권8호
• /
• pp.1-7
• /
• 2008

본 논문에서는 손실을 고려한 Metamaterial(MTM) 전송선의 단일 셀을 구성하고, 이 전송선에서 방사효과를 갖는 파라미터들의 실제 값을 구해본다. 그리고 이 단일 셀을 이용하여 분산 다이어그램을 그려, 여러 셀을 cascade로 연결하여 공진체로 사용하기 위한 조건들을 찾아낸다. 공진체로 사용할 시 종단을 단락 또는 개방을 하게 되는데, 각각의 경우에 따라 공진 주파수를 알아내기 위해 나타나는 입력 임피던스 혹은 입력 어드미턴스에 대해서 논의한다. 이를 이용하여 공진 체의 Quality Factor와 대역폭을 구하였으며, 공진 안테나의 입력 어드미턴스를 회로 시뮬레이션과 EM 시뮬레이션에서 비교하였다. 또한 단일 셀을 이용한 안테나를 설계하여, $0.05\lambda_0\times0.12\lambda_0$의 초소형 안테나로의 설계 시 방사효과 모델링이 어떤 영향을 미치는지 분석하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권3호
• /
• pp.458-464
• /
• 2017

A magnetic tunnel junction (MTJ) based ternary content addressable memory (TCAM) is proposed which provides non-volatility. A unit cell of the TCAM has two MTJ's and 4.875 transistors, which allows the realization of TCAM in a small area. The equivalent resistance of parallel connected multiple unit cells is compared with the equivalent resistance of parallel connected multiple reference resistance, which provides the averaging effect of the variations of device characteristics. This averaging effect renders the proposed TCAM to be variation-tolerant. Using 65-nm CMOS model parameters, the operation of the proposed TCAM has been evaluated including the Monte-Carlo simulated variations of the device characteristics, the supply voltage variation, and the temperature variation. With the tunneling magnetoresistance ratio (TMR) of 1.5 and all the variations being included, the error probability of the search operation is found to be smaller than 0.033-%.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2003년도 하계학술대회
• /
• pp.3-6
• /
• 2003

Effect to altered geometry of a suggested defected ground structure(DGS) unit cell was investigated . And equivalent circuit model was extracted from the DGS unit cell A microstrip band Pass filter with DGS has been designed in this Paper. The BPF with DGS was fabricated and obtained experimental results with network analyzer HP8510C. Experimental results show the center frequency of 2.45GHz, the insertion loss of 0.85dB, and the 3-dB bandwidth of 470MHz (19.5%). The center frequency of BPF is 2.4GHz which is available for wireless LAN.

• 한국안전학회지
• /
• 제9권3호
• /
• pp.3-12
• /
• 1994

This study employed the Eshelby's equivalent inclusion method incorporated with mean field theory to investigate the Internal stress of short fiber-reinforced metal matrix composites during static loading and the dynamic finite element analysis by using alternative unit cell model to investigate the impact behaviors during the impact loading. Using the 2124 Al-SiC system as an example, the general effects of parameters such as fiber's aspect ratio, content and modulus were examined.

• 한국전산구조공학회논문집
• /
• 제37권4호
• /
• pp.259-265
• /
• 2024

형상기억합금(SMA)-섬유 액추에이터는 소프트 로봇 공학 및 웨어러블 기술을 포함한 다양한 분야에서 큰 주목을 받아왔다. 이러한 부드러운 액추에이터는 SMA와 단순 직물 섬유를 결합하여 개발되었으며, K 루프와 P 루프라는 두 가지 루프 패턴으로 편직되었다. 두 루프 모두 루프 헤드 형상으로 인해 반대 굽힘 특성으로 구별된다. 그러나 이러한 액추에이터 시트의 편직 공정에는 전문 지식과 시간이 필요하므로 편직 루프 작동 시트의 생산 비용이 높아진다. 이 논문에서는 전압을 가할 때 큰 변형이 발생하는 SMA 직물 기반 액추에이터의 변형을 평가하는 새로운 방법을 소개하였다. SMA 재료의 매우 비선형적인 구성 방정식으로 인해 수치 분석을 위한 분석 모델을 개발하는 것은 어렵다. 따라서 본 연구에서는 SMA 재료의 대변형을 고려하면서 SMA-섬유 액추에이터의 초기 설계에 사용할 수 있는 선형 구성 방정식을 활용하는 새로운 접근 방식을 제안하였다. 전기-기계연성 효과를 모델링할 수 있는 선형구성방적식은 ABAQUS의 UMAT을 사용하여 구현하였다. 이 등가 단위 셀 모델(EUC)은 K-루프와 P-루프의 실험적 굽힘 작동 결과와 비교하여 검증하였다.