The Physical properties of corn starch were investigated by scanning electron microscopy, X-ray diffractometry and differential scanning calorimetry during the formation of enzyme-resistant starch(RS). Samples were studied in their native states and after annealing at 50, 55, 60 and 65℃ in excess water(starch : water=1:3) for 48hr. Starch granules became smaller and more rounded after annealing than in their native state. Annealing did not change the X-ray profile of native corn starch. After autoclaving-cooling cycles, native starch lost most of its crystallinity but annealed ones showed some of their crystallinity left as diffuse or poor B-type, which didn't relate to increasing Rs yields. During formation of RS, however, both native and annealed starches changed their X-ray profile from A-type to poor B-type of retrograded amylose. Annealing caused an increase in gelatinization temperature and enthalpy, but a narrowing of gelatinization temperature range. Only starch annealed at 65℃, however, showed a decrease in enthalpy even though its gelatinization temperature increased, which appeared to be due to the partial gelatinization in the amorphous region during annealing. Peak height index(PHI), the ratio of ΔH to Ti-To, increased by annealing. PHI values, therefore, showed the possibility as an indicator to predict RS yield which cannot be differentiated by differential scanning calorimetry and X-ray diffraction data.
Effects of replacement of corn starch with Amylomaize Vll starch and addition of enzyme-resistant starch on texture characteristics of com bread (CON) were investigated. Amylomaize-substituted corn bread (AMZ) was made by replacing corn starch with Amylomaize Vll starch. 15% (RSl5) and 30% (RS30) of butter, was replaced with enzyme-resistant starch (RS) from Amylomaife Vll starch, respectively. Textu,e describing terms were classified according to their physical properties. Result of sensory evaluation characteristics showed that the size of air cells increased as butter replacement level decreased and that hardness increased but springiness decreased as com starch was replaced with Amylomaize Vll starch. The results of Texture Profile Analysis with deformation of 30% and 50% showed that hardness inclosed but cohesiveness decreased as cooling time increased.
Tarakjuk with different amylose content was made up using roasted rice flours that consisted of the highest enzyme-resistant starch (RS), while differential scanning calorimetry (DSC) was also utilized to measure the gelatinization temperature of these roasted rice flours in order to establish cooking temperature of tarakjuk. The following qualities of tarakjuk with different amylose content were studied: color, viscosity, spreadability, starch fractions involving total starch (TS), rapidly digestible starch (RDS), slowly digestible starch (SDS) and RS, in vitro starch digestibility (IVSD) and sensory properties. During experimentation, it was found that as the amylose content of the rice flour decreased, the L value of tarakjuk decreased, whereas a value increased significantly (p<0.05). Also, while viscosity showed to increase significantly (p<0.05), on the opposite end, the property of spreadability decreased. TS ranged from $15.95{\sim}17.31%$, RDS $9.36{\sim}10.16%$, SDS $5.46{\sim}6.91%$ and RS $0.33{\sim}1.07%$, on a dry basis. Although the amylose content of rice flours decreased, IVSD increased, however showing no significant difference. When testing the sensory properties of tarakjuk, color and viscosity increased, whereas clumpiness decreased. Ilpum tarakjuk showed the highest score for nutty taste and overall acceptance levels. In fact a high correlation was shown between nutty taste and overall acceptance level (p<0.01), which leads one to believe that nutty taste is a prime factor that greatly influences overall acceptance. Furthermore, viscosity was positively correlated with both a and b values, however negatively correlated with L value (p<0.05). Moreover, roasted nutty taste and overall acceptance were positively correlated with a value (p<0.05), respectively. In conclusion, the above results suggest that tarakjuk could be made by choosing the appropriate rice flour based on the nutritional or sensory purpose.
Thermal characteristics and granular morphology on enzyme-resistant starches (RS) formed during heat-moisture treatment (HMT) and retrogradation were investigated in high amylose corn starches, Hylon V and Hylon VII. With each treatment, both starches showed a similar trend in the increase of RS, but RS yield of Hylon VII is higher than that of Hylon V. Specially, RS was increased remarkably by HMT. It was more than doubled from 11.4% to 26.6% for Hylon V and from 15.9% to 32.8% for Hylon VII. A small increase of RS resulted from retrogradation. HMT on starch increased gelatinization temperature, decreased enthalpy. Retrograded starch exhibited small three endothermic transitions at $94^{\circ}C$, $110^{\circ}C$ and $140^{\circ}C$ in differential scanning calorimetry (DSC) thermogram due to the remained ungelatinized starch granules, dissociation of amylose-lipid complex and melting of recrystallized amylose, respectively. Enzyme-resistant starches isolated from native and heat-moisture treated starches showed a broad endothermic transition at higher temperature than native starch, while retrograded starch exhibited a very sharp peak at ${\sim}150^{\circ}C$ due to the melting of amylose crystallites. Under microscopy, starch granules with HMT was not changed, but retrograded starches showed the aggregates of starch granules because amylose leached out during gelatinization. Iodine stained RS clearly showed the differences in enzyme hydrolysis on the native, heat-moisture treated and retrograded starches.
Yields of enzyme-resistant starch (RS) from three kinds of maize starches (Amioca, normal starch and Amylomaize VII) which were treated with 1 N HCl for 24 hr and physicochemical characteristics were investigated. Hydrolysis rate of maize starches decreased with increasing amylose content. Maximum wavelength $({\lambda}_{max})$ and iodine affinity were decreased by the acid treatment. The yields of RS increased with acid treatment up to 12 hr and then decreased. The yield of for 12 hr acid-treated Amioca increased 8 times more than untreated sample, but those of normal starch and Amylomaize VII slightly increased. Using SEM, acid-treated and autoclaved maize starches showed gel like structure, but RS had round and rod shape small particles. X-ray diffraction patterns of autoclaved starches showed amorphous structure in Amioca and B-type in normal starch and Amylomaize VII, and those of RS showed all completely crystalline structure.
The effects of cooking methods on the total dietary fiber(TDF) and enzyme-resistant starch(RS) contents of nonwaxy and waxy milled and brown rices were investigated. The TDF contents of raw rices were 3.77% for nonwaxy brown, 3.41% for waxy brown, 1.37% for nonwaxy milled and 1.14% for waxy milled rices. The TDF contents were higher in brown rices than milled ones and slightly higher in nonwaxy than waxy ones. However, there were no significant differences among raw and cooked rices with. automatic electric cooker and automatic pressure cooker. The TDF contents of cooked rices did not show any increase, but that of waxy milled ones rather slightly decreased by cooking. The RS contents analysed were not significantly different between automatic electric cooking and automatic pressure cooking. The RS contents of cooked rices were 0.05∼0.06% for nonwaxy milled, 0.09∼0.12% for nonwaxy brown, 0.07∼0.08% for waxy milled, 0.11∼0.13% for waxy brown, which showed higher RS content in brown than milled ones, and in waxy than nonwaxy ones. The ratios of RS/TDF were 4.1∼4.2% for nonwaxy milled, 2.8% for nonwaxy brown, 7.5∼8.9% for waxy milled, 3.6∼3.7% for waxy brown, which showed that the higher the TDF contents, the less the contribution of RS to the TDF.
This study attempted to examine the application of retrograded starch (RS3) isolated from rice flour into Madeleine which is easy to make, supply enough energy and micro nutrients with adequate drinks, and prevent an adult disease. This could be a popular food to anyone regardless of age and gender who avoid rice and become high value-added, processed rice foods. For this, control Madeleine was made from wheat flour and an experimental one was made from 5 or 10% rice RS3 addition as well as wheat flour. Four different types of rice were produced from Premium Ho-Pyong Rice, that is, dry milled rice flour(RFD), soaked for 8 hours and milled, followed by air-dried rice flour(RFW), rice starch(RST), and retrograded rice starch or enzyme-resistant starch(RS3). The results found were as follows: Proximate compositions were decreased with soaking to make RFW, RST and RS3, compared to RFD. RS3 had the highest L, +a and ${\Delta}E$ with the lowest +b, changing it to a dark color, explaining the need for heat control during processing. At $80^{\circ}C$, the swelling power was shown in the order of RST>RFW>RFD>RS3 and the solubility of RS3 was the highest. There were significant differences in viscosities of peak, trough, cold, breakdown and total setback of all rice samples using RVA (p<0.001). Due to the pH of RS3, the Madeleine batter became acidic (p<.01) and expanded, resulting in more air cells and open texture. With an increasing RS3 level in Madeleine, several textural attributes among 'fresh' and 'stored at room temperature' Madeleine samples were significantly different by using Texture Analyzer. While the addition of RS3 in Madeleine did not significantly affect the sensory evaluation, indicating RS3 isolated from rice as a beneficial ingredient for processed rice products.
Influence of amylose content on formation and characteristics of enzyme-resistant starch (RS) was investigated by scanning electron microscopy, X-ray diffractometry and differential scanning calorimetry. RS yield increased up to 36.1 % as the amylose content of corn starch increased. Starch granules of Amyulomaize V and Ⅶ were more rounded and smaller than those of regular corn ; some were elongated and had appendages. After autoclaving -cooling cycles, the granular structure disappeared and a continous spongy-like porous network was visible in regular corn starch ; the granular structure was stillevident in parts in Amylomaize V and Ⅶ starches. In all isolated RS residues , the porous structures were no longer visible and more compact formations predominated. While regular corn starch showed an A-type X-ray profile, Amylomaize V and Ⅶ starches exhibited a combination of B- and V-types. Regular corn starch lost most of its crystallinity during autoclaving , but the crystallinity was still left in Amylomaize starches as diffuse or poor B-types. All RS residues showed the presence of poor B-type regardless of amylose contents. Transition temperatures and enthalypy of native starches were a little higher in Amylomaize V and Ⅶ starches than those of regular corn starch . Regardless of amylose contents, all RS residues exhibited an endothermic transition over a similar temperature range (135 $^{\circ}C$~169$^{\circ}C$), with a mean peak temperature of ~154$^{\circ}C$, which is generally foud for retrograded amylose crystallities. Higher transition temperature, enthalypy, and RS yield of AMylomaize V and Ⅶ starches were related granular stability shown by the microscopic and crystallographic studies.
Lintnerization properties and yield of enzyme-resistant starch in maize starches with different amylose content were investigated. Hydrolytic patterns of starches showed two distinct stages. With decreasing the amylose content, hydrolysis extents of starch increased. X-ray diffraction patterns of Amloca, PFP and commercial maize starch were the A crystalline type, and those of Amaizo 5 and Amylomaize VII were the B crystalline type. As acid hydrolysis time increased, the relative crystallinity of starches increased. After heating-cooling treatment was repeated up to 4 times, the yield of RS increased with increasing the amylose content. The yields of RS in lintnerzed maize starches decreased with acid treatment.
The aim of this study was to produce resistant starch preparations from acid-modified com starches prepared at various hydrolysis levels (0.5-4.0 hr). Effect of autoclaving cycles on resistant starch (RS) formation was investigated. Molecular weight distribution, pasting and functional properties of acid-modified com starches were determined. For RS formation native and acid-modified starch samples were gelatinized and autoclaved (1 or 2 cycles). While native and acid-modified starches did not contain any RS, the levels increased to 9.0-13.5% as a result of storage at $95^{\circ}C$ after first autoclaving cycle. Second autoclaving cycle together with storage at $95^{\circ}C$ brought final RS contents of the samples incubated at 4 and $95^{\circ}C$ after the first cycle to comparable level. As acid modification level increased, the amount of high molecular weight fractions decreased, resulting in significant decreases in viscosities (p<0.05). The samples produced in this study had low emulsion stability and capacity values.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.