• 대한환경공학회지
• /
• 제27권3호
• /
• pp.293-301
• /
• 2005

재생골재를 교각안정용 쇄석으로 재활용하기 위하여 다양한 용출방법을 이용하여 미량원소를 포함한 무기이온들의 용출특성을 연구하였다. 본 연구에 적용한 방법은 연속 회분식 용출시험(Continuous batch leaching test: DIN 38414-S4), 가용용출시험(Availability test, NEN 7341), pH 유지 시험(pH-stat test: CEN/TC 292/WG6) 그리고 탱크 확산시험(Tank diffusion test: NEN 7345)등 이다. 기존에 많이 적용되온 EPA의 TCLP와 국내 공정시험법의 경우 빠르고 경제적인 방법으로 고형폐기물의 단기간 용출특성을 파악할 수 있으나 다양한 용출환경에서 장기간 일어나는 용출특성을 판단하기 어려운 점이 있었다. 본 시험에 적용된 방법들은 이러한 제한을 극복하고 보다 다양한 환경에서 일어날 수 있는 용출특성을 평가하고자 하였다. 본 연구에 적용된 시험들은 별도의 위해성 판단 기준이 없다. 그러나 본 시험의 결과들을 위해성 판단을 위해 많이 쓰이는 TCLP와 국내폐기물 공정시험방법의 기준에 비교할 때 접촉시간, pH 조건 등의 용출조건이 더 가혹한 조건에서 이루어졌음에도 두 시험의 위해성 기준에 훨씬 못 미치고 있다. 이는 재생골재를 교각안정용 쇄석으로 활용할 경우 환경위해 정도가 우려할 수준 이하일 것임을 시사한다. 특히 교각안정용 쇄석이 사용될 하천은 물이 정지되지 않고 늘 흐르는 곳으로써 용출된 원소들은 그 자리에 축적되지 않고 분산, 희석되어 그 영향정도는 더 낮아질 것으로 생각된다.

• 한국항공우주학회지
• /
• 제47권5호
• /
• pp.344-357
• /
• 2019

운용상 고장은 제조 시 아무런 문제가 나타나지 않더라도 발생할 수 있으며, 설계 절차에서 고려하지 못했던 환경적 스트레스가 원인일 수 있다. 따라서 환경시험은 이러한 고장의 원인을 판단하기 위해 필수적으로 수행되어야 한다. 또한 환경시험은 군수품이 운용 시 환경적 스트레스로부터 충분한 저항력을 가지고 있는지 판단하는데 사용된다. 본 연구에서는 MIL-STD-810G Change 1기반의 환경시험법과 시험수준을 대한민국에서 운용될 전투기 개발에 맞게 테일러링하여 적용한다. 전투기의 각기 다른 파트는 각각 다른 환경에 노출될 수 있으므로 노출되는 환경이 다른 구성품, 또는 LRUs (Line Replaceable Units) 별로 환경시험을 진행해야 한다. 본 연구에서는 비슷한 환경에 노출되는 LRU 수준에서 시험법 적용여부 및 시험수준의 테일러링 기법을 도출하였으며, 자연, 유도 환경을 나누어 기술하였다. 대한민국에서 운용하는 전투기를 가정하였으므로 한반도의 환경에 맞는 시험법과 시험 수준에 대한 테일러링이 필수적이다. 한 시험법 내에 있는 여러 가지 절차와 시험 수준에 대한 테일러링에 대한 추가적인 연구가 필요하다. 또한 여러 가지의 시험법을 수행할 때 시험순서가 결과에 영향을 미칠 수 있어 환경시험 설계에 있어 필수적인 요소가 되므로 시험순서 결정에 대한 연구도 필요하다.

• 한국입자에어로졸학회지
• /
• 제13권1호
• /
• pp.17-23
• /
• 2017

In this study, the test results obtained from the performance tests for CA (Korea Association of Cleaning Air) certificated air cleaners which had been commercially available in Korea from 2003 to 2015 were analyzed. Among the test parameters such as flow rate, particle collection efficiency, clean air delivery rate (CADR), ozone emission, odor removal efficiency and noise level, noise level and CADR were correlated with flow rates. Collection and odor removal efficiencies were 20% higher than the limit of the CA certification. The ozone emissions from the air cleaners were negligible because all the air cleaners were equipped with only HEPA filters, not electrostatic precipitation method which produces ozone.

• Environmental Engineering Research
• /
• 제23권2호
• /
• pp.189-194
• /
• 2018

The traditional gold mining in Kulon Progo district, Special Region of Yogyakarta Province produced tailings containing mercury (Hg) from the gold amalgamation process. Mercury accumulated in tailings has 164.19 mg/kg - 383.21 mg/kg in total concentration. Stabilization/solidification (S/S) is one of the remediation technologies to reduce waste pollution. Portland cement is one of the additive materials in S/S that effective encapsulates heavy metal waste. The aim of this research is to know the optimum composition of tailings mixture with Portland cement in S/S process. This research used variation of tailings composition. Variation of Portland cement composition with tailing are 100:0, 90:10, 80:20, 70:30, 60:40, 50:50, 40:60, 30:70, 20:80 and 10:90. The result of this study found that the optimum composition of Portland cement: tailings was 10:90, with compression test of $257ton/m^2$ and TCLP test was 0.0069 mg/L. The compression test results were in accordance to US EPA Standard quality of $35ton/m^2$. TCLP test results meet the standard of Indonesian Government Regulation No. 101 Year 2014 of 0.05 mg/L.

• 한국토양비료학회지
• /
• 제41권5호
• /
• pp.324-329
• /
• 2008

A coal mine drainage sludge(designated as CMDS) is mainly generated during physicochemical treatment or electrical purification of the drainage abandoned mine that include dissolved heavy metal. To understand the possibility of an application of the dehydrated CMDS as the landfill cover medium of hygienic a reclaimed ground, an laboratory experiment was performed to investigate the physicochemical and geoengineering characteristics of the dehydrated CMDS. To improve the geoengineering characteristics of the dehydrated CMDS, the liquid limit, plasticity limit test, compaction method test, strength test, and hydraulic conductivity test ware performed with the lithification material mixed sludge. When the mixed ratio of the sludge and the lithification material was more than 1:06, the compaction method was A method, the moisture content less than 33.5%, the strength of mixed sludge was $8.2kg\;cm^{-2}$, the hydraulic conductivity was $2.7\times10^{-6}cm\;sec^{-1}$, the sludge was up to the landfill standard of US Environmental Protection Agency (US EPA).

• 한국간호교육학회지
• /
• 제21권1호
• /
• pp.28-35
• /
• 2015

Purpose: The purpose of this study was to examine the effects of prior information about ICU environment on the anxiety and environmental stress of cardiac surgery ICU patients. Methods: A non-equivalent control group non-synchronized quasi-experimental research design was used. Participants were 60 (control 30, experimental 30) patients who had been admitted to ICU. Prior information about the ICU environment was provided to the experimental group. The anxiety level of subjects was measured by State-Trait Anxiety Inventory (STAI) and the stress level of subjects was measured by the Intensive Care Unit Environmental Stressor Scale (ICUESS). Data were analyzed using a Chi-square test or a Fisher's exact test, independent samples t-test, and paired samples t-test. Results: There was no difference in Anxiety (t=-0.58, p=.563), but there was a significant difference in environmental stress (t=10.46, p<.001). Conclusion: Providing prior information would be an effective nursing intervention to reduce environmental stress.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1141-1146
• /
• 2009

The compressibility of clay has been expressed e-log p' graph. In natural clay, e-log p' graph are changed by deposition condition and chemical cementation as well as Atterberg limits, whereas in reconstituted clay, it is generally known that e-log p’ curve is varied with Atterberg limits. However, e-log p' graph is possible to change according to the reconstituting methods and test conditions. In this study, consolidation tests are performed as various test condition for reconstituted Busan clay. Test results show that the relationship e/$e_L$ and log p' is almost constant with $e_L$. And the compression index obtained from slurry method sample is larger than one obtained from kneading method sample. Intrinsic compression line (ICL) of Busan clay is identical with ICL suggested by Burland.

• 한국환경보건학회지
• /
• 제48권5호
• /
• pp.266-271
• /
• 2022

Background: The selection of distributions of input parameters is an important component in probabilistic exposure assessment. Goodness-of-fit (GOF) methods are used to determine the distribution of exposure factors. However, there are no clear guidelines for choosing an appropriate GOF method. Objectives: The outcomes of probabilistic consumer exposure assessment were compared by using five different GOF methods for the selection of input distributions: chi-squared test, Kolmogorov-Smirnov test (K-S), Anderson-Darling test (A-D), Akaike information criterion (AIC) and Bayesian information criterion (BIC). Methods: Individual exposures were estimated based on product usage factor combinations from 10,000 respondents. The distribution of individual exposure was considered as the true value of population exposures. Results: Among the five GOF methods, probabilistic exposure distributions using the A-D and K-S methods were similar to individual exposure estimations. Comparing the 95th percentiles of the probabilistic distributions and the individual estimations for 10 CPs, there were 0.73 to 1.92 times differences for the A-D method, and 0.73 to 1.60 times differences (excluding tire-shine spray) for the K-S method. Conclusions: There were significant differences in exposure assessment results among the selection of the GOF methods. Therefore, the GOF methods for probabilistic consumer exposure assessment should be carefully selected.

• 한국환경보건학회지
• /
• 제38권5호
• /
• pp.398-406
• /
• 2012

Objectives: In order to investigate the relation between environmental pollution and its effect on human health in large-scale industrial complex regions, monitoring studies have been conducted since 2003. The main purpose of this Gangneung study is to produce background data which can be compared with several large-scale industrial complex regions such as Ulsan, Sihwa, Banwol, Gwangyang, Yeosu, Pohang and Cheongju Daesan industrial complexes. Methods: In this Gangneung study, 1,007 local residents were recruited and the framework of this study was designed to evaluate and monitor health effects associated with low-level but long-term exposure to environmental pollutants. A survey was performed based on personal questionnaires, medical check-ups, and allergy skin prick tests for twelve common allergens. The authors reviewed the prevalence rate of skin allergens in Gangneung compared with in large-scale industrial areas. The results are summarized as follows. Results: The diagnosis prevalence and medical treatment prevalence of asthma were lower than in industrial complex regions, but allergic rhinitis was higher. The allergy skin test prevalence was 26.0% and the most common allergens were dust mites (D. pteronysinus 16.7% and D. farinae 16.3%). Conclusions: The positive findings of the skin prick test were similar with large-scale industrial complex regions in Korea. Further study is required to find the cause of the regional differences in skin prick prevalence.

• 분석과학
• /
• 제22권5호
• /
• pp.369-375
• /
• 2009

저농도 섬유상 분진 표준시료를 제조하여 균질도와 정확성을 조사하고, 모의 숙련도 시험을 통해 최적의 숙련도 시험 방안을 평가하였다. 분석 결과 표준시료 농도와 석면밀도의 상관성이 0.9863~0.9968으로 매우 높게 나타났고, 표준시료를 이용한 모의 숙련도 시험을 통해서, 국내에서의 숙련도 시험 결과 평가 기준은 표준시료 분석결과의 Z값이 ${\mid}Z{\mid}{\leq}2$를 만족하는 것이 타당한 것으로 나타났다.