Journal of the Korean Society for Aeronautical & Space Sciences (한국항공우주학회지)

The Korean Society for Aeronautical and Space Sciences (한국항공우주학회)
권호 표지
DOI QR코드

DOI QR Code

Environmental Test Tailoring for Fighter Aircraft Intended for Operating in Korean Peninsula

대한민국에서 운용될 전투기의 환경시험 테일러링 기법 연구

  • Park, Jung Min (Specialized Graduate School for Aerospace Engineering, Gyeongsang National University) ;
  • Lee, Jae Won (School of Mechanical and Aerospace Engineering, Gyeongsang National University) ;
  • Myong, Rho Shin (School of Mechanical and Aerospace Engineering, Gyeongsang National University)
  • Received : 2018.10.27
  • Accepted : 2019.04.26
  • Published : 2019.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

Operational failures may occur even though there had been no signs of defect during the manufacturing process, which may be caused due to exposure to environmental stress which had not been addressed properly during the design process. It is thus necessary to perform environmental testing to determine the cause of the failures. Environmental testing is also used to determine whether a materiel has enough tolerance to the environmental stress during its operation. In this study, the method and level for each environmental testing are properly tailored and applied to a fight aircraft intended to operate in ROK (Republic of Korea), based on the MIL-STD-810G Change 1. Since each part of a fighter aircraft may be exposed to each different environment, LRUs (Line Replaceable Units) exposed to similar environment should be tested similarly. In addition, the decision whether to apply specific test and the tailoring technique in test level were derived for natural and induced environments, respectively. As a fight aircraft is assumed to operate in ROK, the tailoring of test methods and test level to fit to the environment in Korean peninsula is necessary. Further research is needed in determining a specific procedure and a specific level in a test method, and also in determining the test sequence, when conducting more than one is needed, because it can alter test results and it hence becomes an essential element in test design.

운용상 고장은 제조 시 아무런 문제가 나타나지 않더라도 발생할 수 있으며, 설계 절차에서 고려하지 못했던 환경적 스트레스가 원인일 수 있다. 따라서 환경시험은 이러한 고장의 원인을 판단하기 위해 필수적으로 수행되어야 한다. 또한 환경시험은 군수품이 운용 시 환경적 스트레스로부터 충분한 저항력을 가지고 있는지 판단하는데 사용된다. 본 연구에서는 MIL-STD-810G Change 1기반의 환경시험법과 시험수준을 대한민국에서 운용될 전투기 개발에 맞게 테일러링하여 적용한다. 전투기의 각기 다른 파트는 각각 다른 환경에 노출될 수 있으므로 노출되는 환경이 다른 구성품, 또는 LRUs (Line Replaceable Units) 별로 환경시험을 진행해야 한다. 본 연구에서는 비슷한 환경에 노출되는 LRU 수준에서 시험법 적용여부 및 시험수준의 테일러링 기법을 도출하였으며, 자연, 유도 환경을 나누어 기술하였다. 대한민국에서 운용하는 전투기를 가정하였으므로 한반도의 환경에 맞는 시험법과 시험 수준에 대한 테일러링이 필수적이다. 한 시험법 내에 있는 여러 가지 절차와 시험 수준에 대한 테일러링에 대한 추가적인 연구가 필요하다. 또한 여러 가지의 시험법을 수행할 때 시험순서가 결과에 영향을 미칠 수 있어 환경시험 설계에 있어 필수적인 요소가 되므로 시험순서 결정에 대한 연구도 필요하다.

Keywords

References

  1. Baek, S. H., Kim J. K., and Kang, T. Y., "Study on the application method of the tailoring based on MIL-STD-810G," Proceeding of The Korean Society of Mechanical Engineers Conference, 2017, pp.24-24.
  2. Kim Y. R., Hong, Y. W., and Kim, D. G., "MIL-STD-810 tailoring for Korean peninsula and periphery climate," Journal of The Applied Reliability, Vol. 18, No. 2, 2018, pp.95-103. https://doi.org/10.33162/JAR.2018.06.18.2.95
  3. Department of Defense, MIL-STD-810G w/Change 1, "Environmental Engineering Considerations and Laboratory Tests," 2014.
  4. Moon, J. Y., Kim, D. G., Sung, I. C., and Hong, Y. W., "A study on the temperature guidelines for weapon system test and evaluation in the Korean peninsula," Journal of The Korean Data and Information Science Society, Volume 27, Issue 6, 2016, pp.1593-1600. https://doi.org/10.7465/jkdi.2016.27.6.1593
  5. Kim, I. S., and Kang, C. W., "A temperature analysis study of Korea and its neighbor regions for temperature specification," Journal of The Korea Institute of Military Science and Technology, Volume 18, Issue 1, 2015, pp.55-65. https://doi.org/10.9766/KIMST.2015.18.1.055
  6. Department of Defense, MIL-HDBK-310, "Global Climatic Data For Developing Military Products," 1997.
  7. Aviation Accidents and Incidents, http://aviati onaccidents1.blogspot.com.
  8. Jung, D. S., Kim. C. J., and Han, Y. J., "Study on the temperature shock test MIL-STD-810 with amendments compare," Proceeding of The Korean Society of Mechanical Engineers conference, 2016, pp.2219-2221.
  9. Lee, J. H., and Choi, B. O., "Research on fungus test through a comparison of the MILSTD-810G w/change1 amendments," Proceeding of The Korean Society of Mechanical Engineers conference, 2016, pp.1379-1380.
  10. Park, J. U., Lim, Y. H., Kyung, S. Y., An, C. H., Lee, S. P., Jeong, S. H., and Ju, Y. S., "Effects of ambient particulate matter (pm10) on peak expiratory flow and respiratory symptoms in subjects with bronchial asthma during yellow sand period," Tuberculosis and Respiratory Disease, Vol. 55, No. 6, 2003, pp.570-578. https://doi.org/10.4046/trd.2003.55.6.570
  11. Choi, Y. H., and Yang, W. S., "The conceptual design of the water spray system for icing/ freezing rain tests," Proceeding of The Korean Society for Aeronautical and Space Sciences Spring Conference Spring Conference, April, 2016, pp.845-848.
  12. F-35 During Freezing Rain Tests, https://www.f35.com.
  13. Park, C. K., and Byun, H. R., "Three cases with the multiple occurrences of freezing rain in one day in Korea," Atmosphere, Vol. 25, No. 1, 2015, pp.31-49. https://doi.org/10.14191/Atmos.2015.25.1.031
  14. Lee, J. H., and Kim, D. S., "Explosive atmosphere test on the MIL-STD-810G w/Change 1 and experimental study for the verification of flame-proof," Proceeding of The Korean Society of Mechanical Engineers Conference, 2016, pp.1483-1487.
  15. Han, J. S., Hong, Y. D., Ahn, J. Y., Chung, I. R., Shin, A. Y., Lim, B. K., Noh, S. A., Son, J. S., and Park, J. H., "Acid deposition monitoring and impact assessment (V)," Internal Report, National Institute of Environmental Research, 2008.