• Toxicological Research
• /
• v.33 no.3
• /
• pp.239-253
• /
• 2017

Neodymium is a future-oriented material due to its unique properties, and its use is increasing in various industrial fields worldwide. However, the toxicity caused by repeated exposure to this metal has not been studied in detail thus far. The present study was carried out to investigate the potential inhalation toxicity of nano-sized neodymium oxide ($Nd_2O_3$) following a 28-day repeated inhalation exposure in male Sprague-Dawley rats. Male rats were exposed to nano-sized $Nd_2O_3-containing$ aerosols via a nose-only inhalation system at doses of $0mg/m^3$, $0.5mg/m^3$, $2.5mg/m^3$, and $10mg/m^3$ for 6 hr/day, 5 days/week over a 28-day period, followed by a 28-day recovery period. During the experimental period, clinical signs, body weight, hematologic parameters, serum biochemical parameters, necropsy findings, organ weight, and histopathological findings were examined; neodymium distribution in the major organs and blood, bronchoalveolar lavage fluid (BALF), and oxidative stress in lung tissues were analyzed. Most of the neodymium was found to be deposited in lung tissues, showing a dose-dependent relationship. Infiltration of inflammatory cells and pulmonary alveolar proteinosis (PAP) were the main observations of lung histopathology. Infiltration of inflammatory cells was observed in the $2.5mg/m^3$ and higher dose treatment groups. PAP was observed in all treatment groups accompanied by an increase in lung weight, but was observed to a lesser extent in the $0.5mg/m^3$ treatment group. In BALF analysis, total cell counts, including macrophages and neutrophils, lactate dehydrogenase, albumin, interleukin-6, and tumor necrosis factor-alpha, increased significantly in all treatment groups. After a 4-week recovery period, these changes were generally reversed in the $0.5mg/m^3$ group, but were exacerbated in the $10mg/m^3$ group. The lowest-observed-adverse-effect concentration of nano-sized $Nd_2O_3$ was determined to be $0.5mg/m^3$, and the target organ was determined to be the lung, under the present experimental conditions in male rats.

• Journal of Korean Society on Water Environment
• /
• v.36 no.5
• /
• pp.385-391
• /
• 2020

Soil loss is a serious problem frequently caused by local torrential rainfalls due to climate change. In particular, soil loss is occurring in agricultural areas rather than urban areas, and many pollutants are introduced into rivers, causing environmental problems. To reduce soil loss, the Ministry of Environment has designated and managed non-point source management areas. The Jaun-district in Hongcheon-gun, which was designed as a non-point pollution source management area in Gangwon-do, is located in the upper stream of Soyang Lake. Most of the agricultural fields are composed of highland agriculture fields. The highland agricultural fields in the Jaun-district are also composed of large-scale farming areas, and the ditches located near the agricultural fields have been illegally used for farmland. Therefore, the local government in Hongcheon-gun is conducting a project to restore the ditches occupied by agricultural fields. However, an analysis of the amount of soil loss that can be reduced by the restoration of the ditches has not been conducted yet. Thus, the purpose of this study was to analyze the effect of reducing the soil loss from the restoration of the ditches used as agricultural fields in the Jaun-district. The SATEEC L Module was used to analyze the reduction in soil loss by ditch restoration. The SATEEC L Module was constructed to estimate the LS factor using Moore and Burch's method after calculating the slope length using the digital elevation model and the maximum allowable slope length. The LS factor and the USLE formula were used to estimate the amount of soil loss that could be reduced by ditch restoration. The analysis showed that the ditch restoration could reduce about 16.6% of the soil loss in the Jaun-district. The results of this study will contribute to the study of methods to reduce soil loss in non-point pollution management areas.

• Korean Journal of Remote Sensing
• /
• v.34 no.2_2
• /
• pp.307-311
• /
• 2018

It is necessary to establish wide integrated surveillance system of marine territory to reduce damage caused by maritime security threats, marine pollution and accidents for safe and clean marine use and efficient development of marine resources. For marine surveillance, the information characteristics of space-time specific, accuracy and operability are required, and real-time information about the wide area should be provided at all times. This special issue has been published to identify the characteristics of each platform, evaluate its usability for the establishment of a wide integrated surveillance system, and present the direction for future convergence studies between platforms. Since 2015, KIOST and cooperative research team have been performing the project, "Base research for building wide integrated surveillance system of marine territory using multi-platform" that detect vessels and red tide etc. near real time by using satellite, UAV and HF Ocean Radar. The objective of this special issue is to introduce the significance for an integrated system for maritime surveillance and to create a forum for discussion on recent advances in remote sensing technology and applications for marine disasters, pollution, and accident surveillance.

• Journal of Technology Innovation
• /
• v.20 no.2
• /
• pp.29-48
• /
• 2012

As the complexity and uncertainty of social and economic systems increase, the strategic foresight that actively and effectively responds to the environmental changes becomes important. A wide range of future forecasting methods are available for strategic foresight. Selecting one of the methods depends on several factors such as availability of time and financial resources and the objectives of the exercise. Although trend extrapolation analysis has been used for many years, scenario planning is being widely used by government and corporate as a tool for strategic decision making in recent years. Generally, scenario planning is carried out through workshop, in which experts with diverse backgrounds exchange information, views, and insights and integrate the diverse viewpoints. However, only a small number of experts can participate in a workshop and citizen opinion is not easily transformed into the policy for the scenario exercise due to the limitation of budget and short duration of a project. It is also much harder to develop creative ideas in the workshop because of the limited time and space. In this study, a new scenario process combining scenario workshop and wiki is proposed to overcome the limitation of scenario workshop. This combined approach can be more productive than using scenario workshop alone when developing new ideas. In this study, we applied the combined approach to develop scenarios for the strategic foresight of future media and present suggestions for improving the process.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.5
• /
• pp.871-878
• /
• 2017

The quality control personnel of the construction work shall establish and execute the quality control plan or the quality test plan and check the qualification of the used materials according to the process, the management of the test and inspection equipment, the quality education, the own quality inspection and measures. Management and quality test of Korea and plays an important role in preventing accidents. However, related organizations did not explicitly disclose their roles in quality testing and quality control tasks while changing the names of quality control personnel to test personnel and quality managers when revising related laws and regulations and the application of labor costs. Therefore, a research of this is needed to improve conflicting situation. In this study, the ambiguous title relation to the quality control persons is improved to meet the requirements of the construction work based on related laws and regulations, and each role and title is classified as 'quality tester' and 'quality manager'. In other words, the person who carries out the quality test of the "Construction Quality Test Standard" specified in the Guideline for Quality Management of Construction Projects shall be the "Quality Tester" and the person who performs the quality control plan establishment and execution work specified in the Enforcement Rule of the Construction Technology Promotion Act shall be referred to as the 'Quality Manager'.

• Journal of Engineering Education Research
• /
• v.10 no.4
• /
• pp.17-28
• /
• 2007

This paper aims to present the ways to maximize educational effects and facilitate a curriculum renovation through the Specified Track Curriculum Development, a joint lecture system among local universities which is implemented by Busan Educational Alliance of Mechanical Engineering (BEAM) as part of New University for Regional Innovation(NURI), a government-sponsored project to facilitate a balanced regional development of Korea. The Specified Track Curriculum is a unified governing body joined by 4 universities of mechanical engineering departments with an emphasis on their specified academic fields(advanced hightech, environmental, marine and foundational machinery sectors), And the universities mutually recognize academic credits. The track (Specified-Track Curriculum) was carried out three times from winter semester in 2005 to the present and 486 students took the track course for two years. As a result, the track laid out a foundation for the first local joint lecture system in korea with the performance-oriented and students-tailored education, meeting needs of the new era and training efficiency. The graduates' employment rose to 8.5%, compared with that of 2005. According to recent survey conducted on companies employing the graduates, the satisfaction with the graduates' performance marked 9.4% improvement. The track also contributed to expanding human networks, facilitating the educational exchange of local universities.

• Ecology and Resilient Infrastructure
• /
• v.6 no.4
• /
• pp.250-257
• /
• 2019

Recently, 357 water-friendly space were established near the main streams of the country through the Four Major Rivers Project, which was used as a resting and leisure space for the citizens, and the river environment and ecological health were improved. We are working hard to reduce the number of points and plan and manage the water-friendly space. In particular, attempts are being made to utilize mobile big data to make more scientific and systematic research on the number of users. However, when using mobile big data compared to the existing method of conducting field surveys, it is possible to easily identify spatial user movement patterns, but it is different from the actual amount of use, so various verifications are required to solve this problem. Therefore, this study evaluated the accuracy of estimating the number of users using mobile big data by comparing the number of visitors using mobile big data and the number of visitors using drone for Samrak ecological park located in the mouth of Nakdong River. As a result, in the river hydrophilic district, it was difficult to accurately estimating the usage pattern of each facility due to the low precision of pCELL, and it was confirmed that the usage patterns in the park could be distorted due to the signals stopped at roads and parking lots. Therefore, it is necessary to improve the number of pCELLs in the water-friendly space and to estimate the number of visitors excluding facilities such as roads and parking lots in future mobile big data processing.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.2
• /
• pp.97-104
• /
• 2015

Due to the introduction of various IT devices, including the recently smartphones and the widespread use of the car navigation system to the location-based information service space has been increased. Spatial information users have been requiring higher levels of quality. In this paper, we study how to build accurate three-dimensional space information by integrating MMS(Moblie Mapping System) survey and airborne survey data. Thus, to analyze the tendency of deviation between the MMS survey and airborne survey data observed in the experimental region, the deviation tendency of the data, it was confirmed that was not consistent. Deviation correction model to select how to change the georeferencing information directly contained in the GPS/INS processing results for the determination, classifies the standard is a method for acquiring the correction reference point coordinates using the calibration model, and analyzed their advantages and disadvantages. With the information of the reference point obtained by airborne photograph of a project, using the method of correcting the MMS survey data. Not only clear the deviation existing between the MMS survey data, it was possible to confirm that the deviation exists between the airborne survey data and MMS survey data was also almost erased.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.1
• /
• pp.140-147
• /
• 2012

Climate changes caused by fossil fuel energy usages have led to serious environmental damages and resource scarcity. Ever-increasing demand for energy causes harsh competition in international energy markets. Nuclear power, which once was regarded as a desirable clean energy, began to face public oppositions after the Japanese nuclear disaster in 2011. In this context, wind power is now considered to be an ever-more important recyclable energy source. Thus, this study intended to identify critical success factors for wind power construction projects. After a thorough literature review, two focus group interview sessions were conducted. A questionnaire-based survey, coupled with the two previous methods, resulted in the extraction of important factors for the success of wind power projects. Experts, including those working as constructors, designers, and owners, were paid a direct visit for the interview and survey. The critical success factors were categorized into feasibility study, right policies, equipment selection, and project financing issues. The proposed critical success factors are expected to be an effective guideline for future investors in wind powers.

• Korean Journal of Construction Engineering and Management
• /
• v.8 no.2
• /
• pp.118-126
• /
• 2007

Environmentally Sound and Sustainable Development (ESSD)" is a key word in recent years. The construction industry, have put a great influence on ergonomic and sustainable environment. Recently, "green building certifications", such as Indoor Air Quality (IAQ) and eco-friendly material regulation have been established. With this regard, new construction and aged-housing remodeling projects are required to meet these certification criteria. Apartment residents have great concern on eco-product, since many cases are reported that Sick Building Syndrome is caused by toxic substance from building materials. Aged-housing remodeling construction has a unique characteristic in that the residents are already determined prior to construction execution. Therefore, the analysis of resident's need for building materials in aged-housing remodeling is relatively easy compared to new building construction. As such, it is very important to analyze their preferences for eco-friendly materials prior to project execution. The purpose of this study is to find the needs of residents and priority of their needs. Based on their needs and priority, this paper provides a new strategy in using environment-friendly materials and maximizing their satisfaction level when aged housing remodeling is constructed. In addition, this paper provide new criteria in selecting new developed environmental materials in remodeling projects for the purpose of improving the safety and health level in construction industry.